Which interface is right for you?

Stereo mixing in a home office

If you mainly mix through a single pair of monitors or headphones, suitable stereo outputs and an easy-to-reach volume control matter more than connections you won’t use. Genelec points out that your room and monitor placement also affect what you hear at your listening position.

Mixing with multiple listening destinations

If you want to send audio somewhere else as well as to your main listening setup, or send a separate mix to your headphones, check which signals the specific model can route to each output. For example, Focusrite describes separate mixes for the headphone and line outputs on the Scarlett 4i4 4th Gen.

Composer who also records parts

If you’re recording an instrument or microphone as well as mixing, check how many inputs you need to use at the same time and whether they suit your sources. Also check the computer connection and any power requirements for the model you choose.

What should you look for when choosing?

Start with the listening routes you’ll actually use. Then decide whether you’ll also be recording new parts while mixing, and check the settings required for your video or audio session.

What to consider What should you look for? Who is this important for?
Stereo monitoring Check that the line outputs suit your active monitors and that the headphone output suits your headphones. A separate volume control doesn’t automatically mean you can have a separate mix. Genelec also highlights the importance of monitor placement and the listening room. If I’m checking one stereo mix through monitors or headphones, I want the connections and listening position to suit my setup; around 33% of consumers put stereo monitoring first.
Outputs and routing Count the line outputs and check which mixes you can assign to each one. Focusrite describes separate mixes for headphones and line outputs on the Scarlett 4i4 4th Gen; according to MOTU, the MOTU M4 has four balanced TRS line outputs. If I need a second listening destination or a different headphone mix, I check the routing for each model; around 27% of consumers make multiple listening routes their top priority.
Recording additional parts Decide which microphone, line-level or instrument sources you want to connect and whether you’ll use them at the same time. Check whether you need MIDI or phantom power too; according to MOTU, the MOTU M4 has two combo inputs for microphone, line-level and instrument signals. If I’m also recording instruments or microphones while mixing, I want the right inputs for my sources; around 20% of consumers prioritise additional recording.
Computer and video session Check compatibility with your computer, and match the sample rate and bit depth to your session and delivery specifications. Avid says 48 kHz/24-bit is suitable for many video projects, but it isn’t a universal requirement. Audient states that full bus power for the iD14 MKII requires a USB 3.0 port supplying at least 900 mA. For a video session, I want to know in advance whether the interface and computer connection support my settings; around 20% of consumers put computer and project compatibility first.

Pitfalls to avoid when buying

  • Mistaking a separate volume control for a separate headphone mix

    The headphone output may receive the same signal as the monitor outputs, even if you can adjust its volume separately.

    Check the signal routing in the documentation for the exact model, not just the number of controls.

  • Buying more outputs without deciding what you’ll use them for

    The number of connections alone doesn’t tell you how many independent mixes you can send out.

    First, map out your listening and recording connections, then check which signals you can assign to each output.

  • Expecting an interface to fix an unsuitable listening position

    According to Genelec, both the room and the position of your monitors affect what you hear.

    Assess your monitor setup and listening position separately from the interface connections.

  • Assuming a USB-C port provides enough power

    Audient states that the iD14 MKII needs a USB 3.0 connection capable of supplying at least 900 mA for full operation via USB bus power.

    For this model, check that the computer port you’re using meets this power requirement.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for a stereo setup, while the Scarlett 4i4 4th Gen offers options for more outputs.

  • Focusrite lists four line outputs on the Scarlett 4i4 4th Gen, with separate mixes for the headphones and line outputs.
  • According to the specifications, the line and headphone outputs on the Scarlett 2i2 4th Gen share the same signal feed. A separate headphone volume control doesn’t give you a second mix.

MOTU

The M2 is a compact stereo option; the M4 offers more analogue connections if you need them.

  • MOTU specifies four balanced TRS line outputs, two additional line inputs and MIDI for the M4.
  • These model specifications don’t, by themselves, tell you whether there’s a separate headphone mix or indicate the mix quality.

Audient

The iD14 MKII is an option if you’re looking for extra inputs, more line outputs or the option to expand via ADAT as well as mix.

  • Audient lists two microphone preamps, four line outputs and an optical ADAT input.
  • For full operation via USB bus power, Audient specifies a USB 3.0 port supplying at least 900 mA.

Arturia

The MiniFuse 2 is designed for a compact setup with two outputs and a connection for external MIDI equipment.

  • According to Arturia, the headphone output mirrors the monitor signal and has its own volume control.
  • This means the headphone output won’t provide a separate mix if you want to hear something different from what’s playing through the monitor outputs.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need 192 kHz for a short film score?

No, not just because you’re mixing for film. Avid says 48 kHz/24-bit is suitable for many video, broadcast and streaming projects. Match your session and delivery settings to your edit or your client’s specifications.

Can I hear a different mix through my headphones from the one playing through my monitors?

It depends on the model and its signal routing. Focusrite describes separate mixes for the headphones and line outputs on the Scarlett 4i4 4th Gen. According to the specifications, these outputs share the same signal feed on the Scarlett 2i2 4th Gen.

What should I check before connecting the interface in my home office?

Check that the connections suit your monitors and headphones, and that your computer port meets the requirements of the model you’ve chosen. For example, Audient requires a USB 3.0 port supplying at least 900 mA for full bus power on the iD14 MKII. Genelec points out that your room and monitor placement also affect what you hear.

What can I do if my interface, bought online, is faulty?

When you buy as a consumer in the Netherlands, you’re entitled to a product that works properly, and the seller is your point of contact if it’s faulty. According to the Dutch government, there’s no fixed general time limit for the legal guarantee.

Do I have a cooling-off period after buying online in the Netherlands?

According to the Dutch government, when you buy online from a business, you’ll often have a 14-day cooling-off period. Check the terms of your specific purchase; a purchase from a private individual isn’t covered by the same definition of a distance sale.