Which setup is right for you?

Stereo mixer in a quiet room

You’re mixing music that’s already been recorded and mainly want to connect a pair of headphones or one pair of studio monitors, without paying for recording channels you won’t use. According to the Focusrite User Guides, the headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal feed.

Mixer using several listening routes

You want a second independently controllable output alongside your usual stereo setup, or need to check a true multichannel setup. Focusrite describes the Scarlett 4i4 4th Gen as offering separate mixes for the headphone and line outputs.

Composer who also records

You’re mixing the score and also recording vocals, instruments or external sound sources. Audient lists two built-in microphone preamps on the iD14 MKII, as well as an optical input for expansion with suitable external equipment.

What should you look for when choosing?

First decide how you want to listen to the existing stereo mix. Then consider whether you need extra independent outputs, recording inputs or multichannel monitoring.

Priority What to check before buying Who should consider this?
Stereo playback Check the monitor connections, two line outputs and headphone socket. Also check whether the headphones and monitors receive the same signal feed or can be routed separately. If I’m mixing an existing score in a quiet room, I want to listen through one pair of headphones or monitors without paying for recording channels I won’t use. Around 39% of consumers prioritise stereo playback.
Extra listening route Count the independent analogue line outputs and check the routing and volume options for each model. According to MOTU, the MOTU M4’s RCA outputs mirror its TRS outputs, so don’t count them as extra independent routes. If you need a second usable audio destination alongside standard stereo playback, you’ll want to know whether those outputs are genuinely routed independently. Around 23% of consumers put extra listening routes first.
New recordings Count microphone preamps separately from line and instrument inputs, and check which inputs can be used at the same time. An optical ADAT input can allow expansion with suitable external equipment, but it isn’t the same as built-in microphone inputs. If I also want to record vocals or instruments while mixing, I need to know how many sources I can connect at once. Around 15% of consumers give new recordings top priority.
Computer and video workflow Compare the model’s operating system, USB and power requirements with your computer. Adobe lists 48,000 Hz as a common sample rate for professional video and film; check your project settings and agreed delivery specifications. If your main concern is making sure the interface works properly with your computer or film project, system requirements and project settings matter. Around 15% of consumers put workflow checks at the top of their list.
Surround monitoring First find out which channel format you need. Then check the number of independently routable physical outputs and the corresponding monitor controls; simply counting connectors isn’t enough. If I need to check individual speaker channels rather than deliver just a stereo mix, the interface must support that channel format. Around 8% of consumers prioritise surround monitoring.

Things to check before buying

  • Confusing a separate headphone volume control with a separate headphone mix

    According to the Focusrite User Guides, the headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal feed, even though they have separate level controls.

    If you need different listening mixes, check the signal routing separately from the volume controls.

  • Counting every connection as an independent output

    According to MOTU, the RCA outputs on the MOTU M4 mirror the TRS outputs. For multichannel monitoring, the routing must also match the speaker channels you need.

    Map out the channels you need and compare them with the independently routable analogue outputs on the exact model.

  • Mistaking an ADAT input for built-in microphone inputs

    The Audient iD14 MKII has two built-in microphone preamps. Its optical input can add extra channels when used with suitable external equipment.

    First count the inputs available straight away, then check what external equipment you’ll need before counting any expansion channels.

  • Assuming a high maximum sample rate is a substitute for a suitable film workflow

    Your video sequence’s sample rate and the required delivery specifications both help determine which settings you need. Adobe lists 48,000 Hz as a common rate for professional video and film.

    Check your project and delivery settings before choosing an interface based on its maximum sample rate.

Brands worth comparing

Focusrite

The Scarlett range spans everything from compact stereo monitoring to interfaces with more analogue outputs and multichannel monitoring options.

  • The Scarlett 2i2 4th Gen has two balanced line outputs. According to Focusrite, the Scarlett 4i4 4th Gen offers separate mixes for the headphones and line outputs.
  • The headphone and line outputs on the Scarlett 2i2 4th Gen share the same feed. The Scarlett 18i20 4th Gen has line outputs 1–10; Focusrite says the signals for outputs 5–10 can be set up in Control 2.

MOTU

The M4 is worth comparing if you need four analogue line inputs and four balanced line outputs.

  • MOTU also lists MIDI in and out, and a headphone output.
  • The RCA outputs mirror the TRS outputs, so they don’t provide extra independent routes. Also check the published system requirements.

Audient

The iD14 MKII combines four line outputs with the option to expand its recording channels via an optical input.

  • Audient lists two built-in microphone preamps and support for up to eight additional channels via ADAT, when used with suitable external equipment.
  • The digital input isn’t the same as having eight built-in microphone inputs. Audient specifies a minimum of 0.9 A at 5 V via a USB 3.0 port for bus power, so check the power supply available from your connection.

Steinberg

The UR22C is a compact 2-in/2-out option if you also want two microphone preamps alongside your stereo mix.

  • The Steinberg manual lists a USB 3.0 connection and compatibility with USB 2.0 High-Speed.
  • The manual lists support for 32-bit integer with a suitable driver and software; that specification alone doesn’t prove an audible benefit when mixing an existing film score.

RME

The Babyface Pro FS is worth considering if extensive software routing and output level adjustment are important to you.

  • RME describes TotalMix FX and a +19/+4 dBu switch on this model.
  • The claimed benefits for sensitive active monitors come from RME and aren’t based on an independent comparison. You won’t automatically need these features for a simple stereo mix.

Audio interfaces at Joybuy

Related products will be available soon.

Frequently asked questions

Do I automatically need an interface with more than two outputs for a short film?

No, not if you’re only checking a stereo mix through one pair of monitors or headphones. Choose extra independently routable outputs when the project calls for separate listening routes or multichannel playback.

Should I set the interface to 192 kHz because I’m working on a film?

Not automatically. Adobe lists 48,000 Hz as a common sample rate for professional video and film; check your video project settings and agreed delivery specifications. An interface’s maximum sample rate isn’t automatically the rate your project requires.

How can I reduce latency if I’m also recording a part?

Adjust the buffer setting in your recording software and, where necessary, in the interface control panel. Ableton explains that a larger buffer causes more latency; find a setting that works on your computer and in your session without dropouts.

What can I do if the interface doesn’t meet my expectations after purchase?

If you buy as a consumer in the Netherlands and the product is faulty, you can contact the seller to ask for a solution. According to the Dutch government, there’s no fixed statutory guarantee period; what you can expect from a product depends, among other things, on the product and normal use. A manufacturer’s guarantee is in addition to your statutory rights.

How can I protect my hearing during long listening sessions?

Start with your headphone volume low, and keep an eye on both the volume and the length of your listening sessions. According to the World Health Organization, the risk of hearing damage increases with louder sound and longer exposure. Follow the chosen model’s manual for connection, power and cleaning.