Who is this for?

Film music mixers with one listening position

You’re mixing existing tracks and want to check your stereo mix through monitors or headphones. Extra inputs and outputs are only useful if they fit your workflow. Adobe recommends 48 kHz for professional video and film production.

Mixers with multiple listening options

You want to send audio to a second destination or provide a second listener with a feed while you mix. Compare the number of outputs, headphone controls and routing options on each model. Manufacturers such as Focusrite, MOTU, Solid State Logic and Audient offer different connection options.

Composers who also record overdubs

Alongside mixing, you record instruments or vocals and need suitable inputs and monitoring. Pay attention to the difference between microphone preamps and extra line inputs, as the MOTU M4 specifications illustrate.

What should you look for?

Compact stereo setup

Best for: listening to existing film music through one stereo pair and a set of headphones. PreSonus lists two balanced monitor outputs and a headphone output for the Studio 24c.

Bear in mind: this model doesn’t have an extra, independent pair of line outputs for a second external listening feed.

Extra line outputs

Best for: connecting a second external audio destination alongside your usual stereo mix. Focusrite and MOTU each list four line outputs for the Scarlett 4i4 4th Gen and M4.

Bear in mind: four physical outputs don’t guarantee that the volume control and DAW routing you need will work as expected. According to their manufacturers, both models have two built-in microphone inputs.

Two listeners or digital expansion

Best for: situations where two independently controlled headphone outputs are important, as on the SSL 2+ MKII, or where the Audient iD14 MKII’s ADAT input could support future expansion.

Bear in mind: ADAT expansion requires suitable additional equipment. Two headphone sockets don’t automatically mean you can create every independent mix you need.

What to consider What should you check? Who is this important for?
Listening options Count your stereo outputs and headphone sockets. Also check the controls and routing available on each model. If I want to check my mix through one stereo pair and a set of headphones, I’m mainly looking for connections that suit that setup. Around 40% of consumers give listening options top priority.
Connections and controls at a height-adjustable desk Check the USB connection, power requirements and compatibility with your operating system. Make sure the controls and cables remain within reach at both desk heights. I want to connect and use the interface without cables or controls becoming hard to reach when I adjust my desk. Around 30% of consumers prioritise desk connections and accessible controls.
Matching your film project Ask the editor about the project and delivery settings. Adobe recommends 48 kHz for professional video and film; check that your DAW and interface use the agreed sample rate. When I hand over a film mix, I want the settings to match what’s been agreed for the project. Around 20% of consumers give this compatibility top priority.
Additional recording Count the sources you’ll record simultaneously and distinguish between microphone preamps and line inputs. Also check the direct monitoring options. If I want to record vocals or instruments alongside the mix, I need inputs suited to those overdubs. Around 10% of consumers prioritise additional recording.

Common pitfalls

  • Assuming four inputs means four microphone preamps

    According to MOTU, the M4 has two combo inputs with microphone preamps, plus two line inputs. So the total number of analogue inputs doesn’t tell you how many microphones you can connect directly.

    Count the microphone channels you need separately from the total number of analogue inputs.

    If you want to record more microphones at the same time, you may need additional equipment.

  • Choosing more outputs without a second listening destination

    According to the specifications, an interface with two outputs may already provide a stereo pair for monitors. Extra outputs are only useful if you can and want to route them to a second destination.

    First, map out your monitor, headphone and any second signal paths, then compare the number of outputs.

  • Assuming the highest sample rate is required for film

    A higher maximum sample rate in an interface’s specifications doesn’t automatically mean your film project needs it. Adobe recommends 48 kHz for professional video and film, and explains how to adjust the sample rate when audio doesn’t match the sequence settings.

    Check the delivery settings and confirm your project and interface settings before exporting.

    If your project settings don’t match, you may need extra conversion time or storage, depending on your workflow.

Brands to consider

Focusrite

The Scarlett 4i4 4th Gen is worth considering if you’re looking for four physical line outputs in a compact desktop interface.

  • Focusrite lists four balanced line outputs, one headphone output and two combo inputs for this model.
  • Check the routing and power requirements for your setup. These specifications apply to this model, not every Scarlett version.

MOTU

The M4 is worth comparing if you’re looking for four balanced line outputs, MIDI and clear level meters.

  • MOTU lists four line outputs, two microphone preamp inputs and one headphone output for the M4.
  • MOTU’s stated latency and audio performance figures are based on the test conditions specified, and don’t necessarily predict performance on every computer.

Solid State Logic

The SSL 2+ MKII is worth considering if you need four balanced outputs or two independently controlled headphone outputs.

  • According to the Solid State Logic manual, this model has two microphone preamps and two independent headphone outputs with separate volume controls.
  • On Windows, you’ll need the driver specified by SSL. If you’re setting up for two listeners, also check that the routing suits the mix you want.

Audient

The iD14 MKII is worth considering if you’re looking at four line outputs and the option of digital expansion via ADAT.

  • Audient lists two built-in microphone preamps and an ADAT input for expansion.
  • You’ll need suitable additional equipment to add channels via ADAT.

PreSonus

The Studio 24c is a compact option to compare if you need one pair of studio monitors and a set of headphones.

  • PreSonus lists two analogue outputs, two combo inputs and direct monitoring via a mix control.
  • This model isn’t the documented choice if you need an extra, independent pair of line outputs.

Joybuy products

Related products coming soon.

Frequently asked questions

Does my audio interface need to be set to 48 kHz for a short film?

Not until you’ve checked the project requirements. Adobe recommends 48 kHz for professional video and film; if uncompressed audio uses the same sample rate as the Premiere sequence, there’s no need to adjust the sample rate. Agree the settings with the editor.

How should I set up an audio interface at a height-adjustable desk?

With the desk in both positions, check that the USB, monitor and headphone cables have enough slack and that you can reach the volume controls. Also compare the power connection and computer system requirements for your chosen model. The cable length you need will depend on your setup.

Do I need lots of microphone inputs for mixing?

Not if you’re only listening to existing tracks. Count the microphone preamps you’ll need if you want to record vocals or instruments simultaneously onto separate tracks. On the MOTU M4, the two additional analogue inputs are line inputs, not extra microphone preamps.

Who can help if an interface I buy as a consumer in the Netherlands breaks too soon?

According to ACM ConsuWijzer, the seller is responsible if a product used normally doesn’t do what you could reasonably expect of it. Your statutory rights are separate from any manufacturer’s warranty. The appropriate solution depends on the circumstances.

Do online purchases always come with a 14-day cooling-off period?

No, there are exceptions. The Dutch government generally states that distance purchases come with a 14-day cooling-off period, and also highlights exceptions and the difference between buying from a business and a private seller. Check the terms of the specific transaction.