For a short film score that you mix mainly on your computer, a basic stereo interface may be all you need, as long as it offers the headphone monitoring and connections you require. You can opt for extra inputs, outputs or MIDI if you record your own sources or want to connect several listening destinations and external equipment. Before buying, also check the connection to your computer, your DAW and project requirements, and the product information for the specific model you’re considering.
Who is an audio interface for?
Mixing on headphones in a shared room
If you create most of your score on a computer and can’t use speakers all the time, a headphone output with practical controls is useful. Focusrite and Solid State Logic models differ in features such as headphone controls and signal routing.
Composers who record instruments
If you record vocals, acoustic sources or electronic instruments, you can choose an interface based on the number and type of inputs. Focusrite and MOTU specifications show that the connections available vary by model.
Creators who need multiple listening destinations
If you need a second listening destination or a separate headphone route, compare the outputs and the options for controlling signals independently. MOTU and Solid State Logic manufacturer specifications describe different output configurations.
What should you look for when choosing one?
Compact stereo interface
A good fit if: you create most of your score on a computer and need one stereo listening route.
Bear in mind: on the Scarlett 2i2 4th Gen, the headphone output shares its signal with the line outputs. Check that this routing suits the way you work.
Interface with extra connections
A good fit if: you want to record multiple sources, need extra outputs or want to connect MIDI equipment.
Bear in mind: extra connections are only useful if your DAW and computer setup support the routing you need.
| What to consider |
What should you check? |
Who is this most relevant to? |
| Headphone monitoring |
Check the headphone connection, whether it has its own volume control, and whether the headphones and line outputs receive the same signal. |
If I mainly mix on headphones in a shared room, I want to adjust the volume easily and know what signal I’m hearing. Around 36% of consumers prioritise effective headphone monitoring. |
| Computer and project compatibility |
Check the system requirements for the exact model, the available port on your computer, and the settings required by your DAW and film project. |
If I want to open my project without connection or setup issues, I check my computer, DAW and project requirements in advance. Around 29% of consumers give compatibility their highest priority. |
| Inputs for recording |
Count how many sources you record at once, then check separately whether you need microphone, line and instrument inputs. |
If I record my own vocals or instruments, I want enough suitable inputs for all the sources I’m using at once. Around 21% of consumers choose mainly based on the inputs they need. |
| Extra outputs and MIDI |
Check how many outputs can be used independently, how your DAW handles routing, and whether your MIDI equipment uses a DIN connection. |
If I need an extra listening destination or DIN MIDI, I want to be sure those connections will work with my setup. Around 14% of consumers prioritise extra routing or MIDI. |
Common buying mistakes
-
Assuming two headphone sockets mean two independent mixes
The number of sockets doesn’t necessarily tell you whether you can set a different signal for each pair of headphones.
Check the manual for the exact model to find out how headphone routing and volume controls work, especially if you’re working on the film with someone else.
-
Choosing extra outputs based on a high sample rate
The stated sample rate and the number of independent outputs answer different questions.
First decide how many signals you want to send out physically at the same time, then check the project settings required for your commission.
-
Confusing the manufacturer’s warranty with all your statutory rights
The Dutch Government distinguishes between statutory rights and additional manufacturer, retailer or extended warranties.
Check what extra cover is offered and keep your proof of purchase in case you need to contact the retailer.
Relevant brands and models to consider
Focusrite
The Scarlett Solo, 2i2 and 4i4 4th Gen offer different sets of connections for simple stereo setups, extra inputs or more outputs.
- The Scarlett 4i4 4th Gen has four line outputs and MIDI in and out; the Solo and 2i2 don’t automatically have the same connections. According to the Focusrite User Guides, the line outputs and headphone output on the 2i2 share the same signal.
- Check which inputs and listening routes you need for each model; specifications for one Scarlett version don’t automatically apply to another.
MOTU
The M4 is worth considering if you need four line outputs and DIN MIDI.
- MOTU specifies that the M4 has four balanced TRS outputs and MIDI in and out.
- Check MOTU’s stated system requirements against your own computer; specifications aren’t an independent performance test.
Audient
The iD4 MKII is an option for a compact setup with a limited selection of inputs and outputs.
- Audient lists two headphone connections, one microphone preamp, two line outputs and USB 3.0 bus power.
- Two headphone connections don’t necessarily mean you get two independently adjustable mixes.
Solid State Logic
The SSL 2+ MKII is worth considering if you need two headphone outputs with separate volume controls or four balanced outputs.
- The Solid State Logic manual specifies that the 2+ MKII has two headphone outputs with separate volume controls, four balanced outputs and DIN MIDI.
- These connections are specific to the 2+ MKII and don’t automatically apply to every model from the brand. For Windows, the manufacturer says its own driver must be installed.
Audio interfaces at Joybuy
Related products coming soon.
Frequently asked questions
Do you automatically need an interface with more than two outputs for this short film?
No, not if your brief and listening setup only call for a stereo mix. For extra listening destinations or external equipment, check both the number of outputs and the routing in your DAW. Also check the delivery specifications for your brief separately.
How do you set up the interface for the first time?
First check that your computer meets the current system and driver requirements for the exact model. Then select the interface and the sample rate required by your project in your DAW. Set the buffer, latency, inputs and outputs to suit your needs too.
How can you avoid listening too loudly during long mixing sessions?
Keep your headphone volume down and take regular listening breaks. The World Health Organization highlights that both sound level and duration of exposure matter; a powerful headphone output is no reason to listen at a higher volume.
What warranty and cooling-off period apply when buying in the Netherlands?
According to the Dutch Government, the Netherlands has no fixed statutory warranty period, but you are entitled to a product that works as it should. For eligible online consumer purchases from a business, a 14-day cooling-off period applies in many cases. An additional paid warranty is separate from your statutory rights; check the terms of the offer.
What product requirements should you check for an interface sold in the Netherlands?
Check the product information and the required CE marking for the specific item. According to Your Europe and the European Commission, CE marking and electromagnetic compatibility rules apply to products covered by the relevant EU legislation. A CE marking is not an independent assessment of sound quality.