If you’re only mixing files already on your computer, first try your existing audio output and driver to see if they meet your needs; you may not need an extra interface. If you want to record a stereo synthesiser or have separate connections for headphones and speakers, choose an interface with the right inputs and outputs. USB bus power can save you from needing a mains adapter for the interface, but it won’t power active studio monitors too, and it only works if your USB port supplies enough power.
Who is this for?
Mixer with limited power sockets
You mix on a computer and don’t want a separate mains adapter for your interface. Check the USB power requirements too, and remember that active monitors need their own mains power. Focusrite and Audient describe USB-powered interfaces, while the ADAM Audio A Series studio monitor manual specifies that the monitors have their own mains connection.
Mixer who uses headphones
You mainly assess your mix through headphones and want to check that the plug, output and volume control suit your setup. Focusrite describes the Scarlett Solo 4th Gen as having a headphone output with a 6.35 mm connection and level control.
Producer with a stereo synthesiser
You want to record a synthesiser’s left and right outputs separately. You’ll need two suitable line inputs for this; Focusrite describes this connection on the Scarlett 2i2 4th Gen.
What should you consider when choosing?
First, decide whether you’ll only be playing existing tracks or also recording an external source. Then check that the power supply, listening connections and computer connection suit your setup.
| What to consider |
What should you look for? |
Who is this important for? |
| Power without a mains adapter |
Compare the USB power requirements of the exact model with your computer port. Count the mains sockets needed for active monitors separately. |
You don’t want to use up a power socket for the interface and want to know whether your computer port supplies enough power. Around 36% of consumers prioritise this power requirement. |
| Listening through headphones or monitors |
Check the headphone plug and volume control, the speaker connections, and the routing if you need multiple listening options. |
You mainly mix on headphones or switch between headphones and monitors, and want suitable connections and controls. Around 29% of consumers prioritise this listening requirement. |
| Recording a stereo source |
Check whether there are two suitable line inputs available at the same time for left and right. |
You want to record your external stereo synthesiser across two channels, not just play existing files. Around 21% of consumers prioritise this recording requirement. |
| Computer and driver |
Check the operating system, USB connection and driver information for the model. Ableton recommends connecting the interface directly to the computer where possible. |
You want to know in advance whether the interface will work with your computer and music software. Around 14% of consumers make this compatibility their main requirement. |
Common buying mistakes
-
Assuming every USB port supplies enough power
For the Scarlett 2i2 4th Gen, Focusrite specifies a minimum of 5 V at 0.9 A for correct operation. So simply having a USB connection doesn’t tell you whether the port meets this model’s requirements.
Check the power requirements for the exact model and the available computer port before assuming you can use a setup without a separate power supply.
-
Thinking USB power also powers active monitors
USB power for an interface doesn’t replace the mains power required by active speakers. The ADAM Audio A Series manual specifies that the speakers have their own mains connection.
Work out how many power sockets your entire setup needs. If you can’t connect your monitors, consider whether mixing on headphones would suit the way you work.
-
Confusing two inputs with two line inputs for stereo
The Scarlett Solo 4th Gen has a jack input and a microphone input; this isn’t the same as the pair of line inputs Focusrite describes for connecting a stereo synthesiser to the 2i2 4th Gen.
Check whether you can connect left and right simultaneously as separate line channels. Focusrite advises turning off instrument mode on the 2i2 when using line level.
-
Assuming an extra pair of connections gives you a second independent mix
On the MOTU M2, the RCA outputs mirror the TRS outputs, so they don’t automatically provide a separate playback route.
If you need multiple independent listening options, check the model’s routing rather than simply counting the connectors.
Brands to compare
Focusrite
The Scarlett Solo 4th Gen suits playback and basic recording needs; the Scarlett 2i2 4th Gen has two line inputs for a stereo synthesiser.
- Focusrite describes separate level controls for headphones and speakers on the Solo 4th Gen.
- Focusrite describes a stereo setup with two line inputs on the 2i2 4th Gen.
- According to Focusrite, the 2i2 4th Gen requires a minimum of 5 V at 0.9 A over USB to work correctly.
MOTU
The M2 is a USB-powered option with two combination inputs for anyone who also wants to connect an external recording source.
- MOTU specifies two combination microphone, line and instrument inputs, plus MIDI in and out.
- According to MOTU, the RCA outputs mirror the TRS outputs, so they don’t provide a second independent stereo pair.
Audient
The EVO 4 is a compact, USB-powered option for anyone looking for two recording inputs and connections for headphones and monitors.
- Audient lists speaker and headphone outputs, monitor mix and USB 2.0 bus power.
- Check that the USB port and connections are compatible with your computer and listening setup.
Solid State Logic
The SSL 2+ MKII is designed for setups that need two separately controlled headphone outputs or extra balanced outputs.
- According to the Solid State Logic manual, the model has two separate headphone outputs and four balanced outputs, and is powered via USB.
- On Windows, it requires the SSL USB Audio ASIO/WDM driver. The extra connections may not be necessary if you only have one listening position.
Behringer
The UMC204HD is worth comparing if you want to use MIDI or extra playback connections as well as record in stereo.
- Behringer specifies USB power, two combination inputs, MIDI in and out, and headphone controls.
- Behringer lists a downloadable driver for Windows; the extra features won’t necessarily be useful if you only mix existing files.
Audio interfaces on Joybuy
Related products will be available soon.
Frequently asked questions
Do I need an interface to mix down existing audio files?
Not necessarily. First try your existing audio output and driver. An interface is mainly useful if you need physical recording inputs, different outputs or another listening setup.
How do I connect an interface and active speakers?
Ableton recommends switching off your monitors before connecting audio cables, turning the interface level down first, and only then switching on the speakers. Also check the mains power requirements and instructions for your speaker model.
What if my Scarlett 2i2 4th Gen doesn’t work properly over USB?
Focusrite specifies a minimum of 5 V at 0.9 A for the Scarlett 2i2 4th Gen. If the USB power supply isn’t sufficient, Focusrite suggests trying another port or cable and, if needed, powering it through the separate 5V DC connection. You may still need a power socket for this.
Who is responsible in the Netherlands if a product doesn’t work properly under normal use?
According to ACM ConsuWijzer, the seller is responsible for the statutory guarantee if a product doesn’t do what you could reasonably expect under normal use. There isn’t one fixed statutory guarantee period for every device.