Producer who mainly mixes
You mainly work with tracks in your DAW and want to switch easily between monitors and headphones, without paying for connections you won’t use.
If you’re mixing a track entirely in your DAW using a pair of monitors and headphones, a compact stereo interface with the connections and controls you need will usually be sufficient. Extra line inputs and outputs are mainly useful if you also want to record a stereo synth or connect external equipment. Also check that your cables have enough slack when you adjust the desk.
You mainly work with tracks in your DAW and want to switch easily between monitors and headphones, without paying for connections you won’t use.
You want to connect a stereo synth or another line-level source as well as mixing. Look for enough spare audio inputs and, if you’re connecting compatible equipment, MIDI.
You switch between sitting and standing, or send audio to extra equipment. Easy-to-reach controls, accessible connections and enough cable slack can all be important.
First decide which signals you want to monitor or connect at the same time. Then consider any extra routing you’ll actually use.
| What to consider | What to look for when buying | Who should prioritise this? |
|---|---|---|
| Monitoring | Check the line outputs, headphone output and volume controls. Also see whether you can set up separate monitor mixes as needed. | If I’m mixing only on monitors and headphones, I want the controls to be easy to reach without paying for unused inputs. Around 36% of consumers prioritise monitoring. |
| Connecting hardware | Count the line inputs and outputs you’ll need at the same time. MIDI carries control data, not audio. | If I want to use a stereo synth or external effects, the necessary audio connections must be available. Around 29% of consumers give hardware connectivity top priority. |
| Controls and cables | Check where the connections are located and whether your cables have enough slack throughout the desk’s full range of movement. | With a height-adjustable desk, I want the controls within reach and the cables routed without tension. Around 21% of consumers prioritise their desk setup. |
| Loopback | Check the manual for loopback support on the exact model and your operating system. A USB-C connection alone doesn’t confirm that the feature is available. | If I want to capture computer audio in streaming or recording software, loopback needs to work with my software and operating system. Around 14% of consumers choose loopback as their main consideration. |
Extra inputs are mainly useful if you also record external sources. They won’t automatically improve how you listen to tracks already in your DAW.
Plan your monitoring and recording setup first, then count the inputs you’ll need at the same time.
The number of physical outputs doesn’t, by itself, tell you how the headphones and line outputs are routed.
Check the routing software and headphone controls for the exact model before assuming you can set up different mixes.
Arturia specifies a 250 mA limit at 5 V for the MiniFuse 2 hub. MOTU states that an optional driver is needed for loopback on Mac with the M4.
Check the power requirements of your peripherals and the driver information for your operating system. Loopback may require an additional driver.
A cable with enough slack when the desk is low may become taut when it’s raised.
Test the cable clearance with your own setup throughout the desk’s full range of movement. You may need longer cables or a different way to route them.
The Scarlett 4i4 4th Generation suits a setup with extra analogue routing, while the Scarlett 2i2 is a simpler point of comparison for a stereo setup.
The M4 is worth comparing if you’re looking for four line outputs, additional line inputs and level meters in your setup.
The MiniFuse 2 combines a compact stereo interface with MIDI, loopback and a USB hub for compatible peripherals.
The UR22C is a compact 2-in/2-out option for a stereo monitor setup, with MIDI and loopback.
No. If all your tracks are already in your DAW, first decide how you want to monitor through your speakers and headphones. Add extra inputs to your count if you also want to record external audio sources.
Use two suitable audio inputs for the left and right channels. Focusrite describes the Scarlett 4i4 as having connections for line-level sources such as synths on inputs 3 and 4; MIDI connections don’t replace audio cables.
Position the interface so you can reach the volume controls. Route your computer, monitor, headphone and any power cables so they don’t become taut throughout the desk’s full range of movement. Check the connections and power requirements of the exact model.
Loopback is useful if you want to capture computer audio in recording or streaming software. Check the manual and driver requirements for the exact model and operating system; MOTU states that an optional driver is needed for the M4 on Mac.
For a standard online consumer purchase, you generally have a statutory 14-day cooling-off period from the day after delivery, subject to legal exceptions, according to ACM ConsuWijzer. You’re also entitled to a statutory guarantee if a product doesn’t perform as you could reasonably expect under normal use; this doesn’t automatically mean a fixed two-year guarantee period.