Who is this buying guide for?

Editor working with existing drum tracks

You edit and listen back to recorded takes at an adjustable desk. Easy-to-reach monitoring controls and the right outputs matter more to you than extra mic inputs. Focusrite describes the Scarlett 2i2 4th Generation as a 2-in/2-out interface.

Drummer recording multiple tracks

You want to record several drum mics at once on separate tracks, so you’ll first check how many usable mic preamps there are. Focusrite, Audient and Solid State Logic each specify eight mic preamps for the Scarlett 18i20 4th Gen, EVO 16 and SSL 18 respectively.

Editor with external studio equipment

You also want to connect line-level equipment or set up separate monitoring routes, so you’ll need to check the actual connections and routing options. MOTU and RME each describe the 828 and Fireface UCX II as having two built-in mic preamps.

What should you look for?

The right interface largely depends on whether you’re editing existing tracks or recording several mics at once.

Compact interface for existing recordings

A good fit if: you edit recorded drum tracks and need one listening position.

The trade-off: a compact 2-in/2-out model such as the Scarlett 2i2 4th Generation won’t necessarily provide enough mic inputs for a larger recording setup.

Multichannel interface for recording drums

A good fit if: you want to record the kick, snare, overheads and possibly more mics at once on separate tracks.

The trade-off: extra connections and a larger unit add little if you only edit existing files.

More routing, not necessarily more mic inputs

A good fit if: you need line-level equipment, multiple signal paths or standalone operation.

The trade-off: according to their manufacturers, the MOTU 828 and RME Fireface UCX II each have two built-in mic preamps; digital or line channels don’t count as extra mic inputs.

At an adjustable desk, you’ll also need to consider how easy the controls are to reach and how much room there is for connected cables.

What to consider What should you check? Who is this for?
Monitoring and controls Check the headphone and monitor outputs, any separate mixes, and whether you can reach the volume control at both desk heights. If I mainly edit existing takes, I want to be able to use my headphones and monitors easily, without unused recording channels. Around 36% of consumers say monitoring and controls are their top priority.
Number of drum mics Make a channel list for your recording plan and count mic preamps separately from line and digital channels. If I want to record several mics at once on separate tracks, I’ll first count how many inputs I need. Around 29% of consumers say recording drums simultaneously is their top priority.
Desk placement Measure the available space and check the full height range with the cables connected; make sure they don’t pull on the sockets. If my desk changes height, I want to be able to reach the controls and route the cables without putting them under strain. Around 21% of consumers say placement and accessibility are their top priority.
Compatibility and additional equipment Check the exact model, your operating system, your computer’s port, the latest manufacturer software and any additional equipment you may need. If I want to use the interface with my own computer or expand my setup later, I’ll check these requirements before buying. Around 14% of consumers say system compatibility and the equipment required are their top priority.

Common buying mistakes

  • Confusing the total number of channels with mic inputs

    An interface with plenty of line and digital channels may still have only two built-in mic preamps, as MOTU specifies for the 828.

    Compare your list of drum mics with the number of mic preamps you can use at the same time, not the biggest channel count.

  • Choosing a large rack unit just to edit existing tracks

    Recording capacity doesn’t replace the monitoring outputs and controls you need when editing at your desk.

    First work out which monitoring routes and controls you need; only choose extra inputs if your recording plans call for them.

    A larger unit also needs a suitable spot and a carefully planned cable route on or around your desk.

  • Counting digital expansion as direct mic inputs

    ADAT and other digital ports don’t add analogue mic connections to the unit on their own.

    Check what additional equipment and connections your expansion plans require.

    Expanding your setup may require an extra preamp or converter, as well as suitable connections.

Brands to compare

Focusrite

The Scarlett 2i2 4th Generation is a more compact option for monitoring and limited recording; the 4i4 adds routing options, while the 18i20 4th Gen is designed for recording more mics at once.

  • Focusrite specifies eight mic inputs for the Scarlett 18i20 4th Gen. For the 4i4, the brand describes separate mixes for the headphone and line outputs.
  • The 2i2 doesn’t offer the connections found on the larger models; compare the features of each model.

Audient

The EVO 16 is worth comparing if you’re looking for several mic inputs and two headphone outputs.

  • Audient specifies eight mic preamps and two independent headphone outputs for the EVO 16.
  • Check that it’s compatible with your computer; whether Smartgain suits your workflow depends on your setup.

Solid State Logic

The SSL 18 is designed for a setup with multiple mic inputs, outputs and digital expansion options.

  • Solid State Logic lists eight mic preamps, two headphone outputs and ADAT for the SSL 18.
  • Manufacturer descriptions of sound quality aren’t an independent comparison with other brands.

MOTU

The 828 is worth comparing if you need line and digital connections and routing options.

  • MOTU specifies two mic preamps, eight additional analogue line inputs and two headphone outputs for the 828.
  • The total number of channels isn’t the same as the number of mics you can connect directly.

RME

The Fireface UCX II is a compact half-rack option for those looking for extensive analogue and digital routing.

  • RME describes front-panel controls, standalone operation and two built-in mic preamps.
  • To record more drum mics at once, you’ll need to find out what additional connections or equipment are required.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need eight inputs to edit existing drum recordings?

No, not just to edit tracks that have already been recorded. Count mic inputs if you want to record several mics at once; when editing, focus on the monitoring outputs and controls you need.

Where should I place an audio interface at an adjustable desk?

Choose a spot where you can reach the controls whether sitting or standing. With your equipment connected, check that the cables can move through the full height range without pulling on the sockets.

Does ‘28 inputs’ mean I can connect 28 drum mics directly?

No. MOTU lists two built-in mic/line/instrument combo inputs for the 828, alongside line and digital channels, among others. Check how many mic preamps each model has.

What should I look for in the CE marking on an audio interface?

The Dutch government says that electrical devices in the EU must carry a CE marking. Check the specific product on offer; a brand name or general model specification doesn’t confirm that the particular item has one.

How can I check whether an interface will work with my computer?

Before buying, check the requirements for the exact model, including your operating system and computer port, as well as the latest manufacturer software. Also check whether any planned upgrades require additional equipment.