Who is this buying guide for?

DAW mixer with monitors

You mainly mix existing tracks and want to switch easily between active speakers and headphones on a small desk. You may not need extra recording inputs.

Producer with external hardware

You might record a synthesiser, vocals or an instrument. Choose the number of inputs and any MIDI connections to suit the equipment you want to use at the same time.

DJ who needs a separate cue

You want to preview a track or deck before sending it to the master output. Check that the outputs are independent and that your DJ software supports the routes you need.

Which connections matter?

First decide whether you only need to monitor a stereo mix, record external sources as well, or use a separate cue. Then compare the connections and the space available.

What to consider What to look for when buying Who should prioritise this
Monitors and headphones Check the type of left and right line outputs, the headphone connection and the level controls. Also check separately whether you need independent audio routes. If I mainly mix tracks in a DAW, I want to connect and control my active monitors and headphones easily. Around 40% of consumers give stereo monitoring their top buying priority.
Space, power and cables Measure the available space, including room for cables. Check what power supply the model needs and whether your computer can provide it. If my desk has little free space, I also want to account for the connections on the back of the interface and the space needed to bend the cables. Around 30% of consumers prioritise desk and cable space.
External recording sources Count how many sources you’ll connect at once and check whether you need microphone, line, instrument or MIDI connections. If I want to record a synthesiser, vocals or an instrument, the inputs need to suit my equipment. Around 20% of consumers give connections for external recording hardware their top priority.
Independent DJ cue Check how many independently addressable outputs there are, and how routing works in both the interface and DJ software. The number of buses alone won’t tell you whether you can send the cue separately. If I want to preview a deck separately while playing, the cue route must be able to run independently of the master. Around 10% of consumers give independent DJ monitoring their top priority.

What should you look out for?

  • Mistaking extra visible connections for an independent stereo pair

    On the MOTU M2, the RCA outputs mirror the other outputs. So they don’t automatically provide an extra, independent stereo pair for a second mix.

    Check the specifications and routing software to see how many output channels can be addressed independently, not just how many connectors you can see.

  • Mistaking a separate headphone volume control for a DJ cue

    A separate volume control may still play the same programme as the monitors. It doesn’t confirm that you can preview a deck independently.

    For the exact model and your DJ software, check whether the master and cue can be sent to separate routes.

  • Measuring only the casing

    The stated dimensions describe the interface itself, but you’ll also need room for cables behind the connections. Some models also need a power connection.

    Measure the space on your desk, including room for cables, and check what power supply the model you choose needs.

    Allow extra space for cables and, depending on the model, the power supply.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen suits a compact stereo listening setup, while the Scarlett 4i4 4th Gen is worth considering if you need extra inputs, MIDI or more output routes.

  • Focusrite specifies two balanced line outputs and a separate headphone volume control for the Scarlett Solo 4th Gen. The casing measures 143 × 96 mm.
  • Focusrite describes separate mixes for the headphones and line outputs on the Scarlett 4i4 4th Gen. Don’t assume the Solo has this feature.

MOTU

The M2 is worth comparing if you’re looking for two recording inputs, MIDI and output meters alongside stereo monitoring.

  • MOTU specifies balanced TRS line outputs, mirrored unbalanced RCA outputs and a headphone output.
  • The mirrored RCA outputs do not automatically provide a second independent stereo output pair.

Arturia

The MiniFuse 2 and MiniFuse 4 offer different numbers of inputs and outputs to suit your connection needs.

  • Arturia lists two inputs, two outputs and one headphone connection for the MiniFuse 2. For the MiniFuse 4, Arturia lists four inputs, four outputs and two headphone connections.
  • Two headphone connections do not, by themselves, prove that DJ software can send a separate cue to each one. Check the routing for the specific version you’re considering.

Audient

The iD4 MKII is worth comparing if you’re looking for a compact interface with line outputs and a specified headphone amplifier.

  • Audient publishes output measurements along with the corresponding loads. These are product specifications, not a comparative test against other brands.
  • Audient specifies a minimum USB power supply of 0,9 A at 5 V via a USB 3.0 port. Check that your computer’s port meets this requirement.

Steinberg

The UR22C is worth comparing if you need two inputs, MIDI and direct monitoring.

  • Steinberg’s manual describes the UR22C as a 2-in/2-out interface, with USB 3.0 and USB 2.0 compatibility.
  • Direct monitoring of recording inputs is not the same as a separate DJ cue output.

Audio interfaces on Joybuy

Related products will be available soon.

Frequently asked questions

Can I automatically preview a DJ deck separately using two headphone connections?

No, the number of connections alone doesn’t tell you that. Check whether the interface and DJ software can send the master and cue to separate routes. For two decks through an external Traktor mixer, Native Instruments specifies two pairs of outputs.

How do I connect active monitors without confusing the headphone route with the line outputs?

Connect the left and right line outputs to your active monitors using suitable cables. According to Focusrite, the Scarlett Solo 4th Gen has two balanced 6,35 mm TRS line outputs. Its separate headphone volume control is not a second independent stereo line output pair.

What power supply should I allow for on my desk?

This varies by model and computer port. Focusrite states that a USB power adapter is supplied with the Scarlett 4i4 4th Gen, and specifies 7,5 W for a separate compatible adapter for this model. Check the manual and available USB power before using a hub or adapter.

What are my rights when buying online in the Netherlands?

When you buy remotely from a business, you’re generally entitled to a 14-day cooling-off period; the Dutch government lists exceptions and distinguishes this from buying from a private individual. If a product is faulty, you can contact the seller: the Dutch government describes your right to a product that meets expectations and, depending on the situation, a free repair or replacement.

Is CE marking relevant when buying in the Netherlands?

CE marking is relevant for products covered by applicable EU product rules that require it. The European Commission sets out electromagnetic compatibility requirements for electrical and electronic equipment. Check the product details and conformity information for the exact model. These general rules don’t prove that a specific listing complies with them.