Who is this for?

Producer who mixes in the box

You want to listen to existing tracks at home through headphones or a single pair of monitors. You don't automatically need extra recording channels for a mix that stays entirely in the computer.

Producer with synthesisers or external effects

You may want to record hardware in stereo or send audio to external equipment. Make sure you distinguish between analogue inputs and outputs and MIDI connections.

Producer who also records or streams

You also mix live signals or share computer audio. In that case, monitoring, drivers and loopback — a feature for recording computer audio — may influence your choice.

What should you consider when choosing?

Start with your listening setup and the signal routes you actually use. Then consider whether you need extra connections for hardware, recording or streaming.

What to consider What to look for when buying Who is this important for?
Listening and controls Check the connectors on your monitors and whether you need a headphone output with its own volume control. If I mainly check my mix through a single pair of monitors and headphones, I want to connect them directly and control the volume at my desk. Around 33% of consumers prioritise listening and controls.
Connecting hardware Count analogue inputs and independently routable line outputs separately; MIDI and mirrored outputs are not extra analogue audio channels. If I want to record a synthesiser or send a separate output to external equipment, I check how many usable routes are available. Around 25% of consumers put hardware connections first.
Computer and software Check the requirements for your model, operating system, USB port and DAW. For loopback on a Mac, MOTU specifies an optional driver; Audient specifies a minimum of 0,9 A at 5 V via a USB 3.0 port for the iD4 MKII. If my laptop or software requires a particular driver, connection or power supply, I want to check that the interface will work with my setup before buying. Around 25% of consumers prioritise compatibility.
Live recording and monitoring Decide whether you want to monitor through your DAW or directly through the interface, and check which driver features your workflow requires. If I record live or stream, I look at monitoring and loopback. Ableton explains that a smaller buffer reduces latency but uses more CPU power; around 17% of consumers prioritise live monitoring.

Common buying pitfalls

  • Counting outputs without checking the routing

    MOTU says the RCA outputs on the MOTU M2 mirror the TRS outputs. So extra connectors don't automatically mean an independent stereo channel.

    Check whether your DAW can use a separate output and whether the model you've chosen offers that route.

    A separate hardware route may mean you need an interface with different connection options.

  • Assuming a high sample rate or bit depth guarantees a better mix

    A supported audio format doesn't, in itself, determine how your monitor setup or mix will sound.

    Choose based on your listening setup and the routes you need first; don't treat format specifications as a listening test.

  • Assuming loopback or a low buffer is available without checking your workflow

    MOTU lists an optional Mac driver for loopback. Ableton explains that smaller buffers use more CPU power.

    Check the driver and compatibility with your operating system and DAW for the recording or streaming workflow you plan to use.

    Allow time to install the driver and set up your workflow.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is an option for a stereo pair of monitors, while the Scarlett 4i4 4th Gen offers more analogue connection options.

  • Focusrite specifies two balanced line outputs for the 2i2 4th Gen and four for the 4i4 4th Gen.
  • This difference is about connections and doesn't prove that one model will produce a better mix. Also check that you're choosing the right generation.

MOTU

The M2 combines two analogue inputs, a stereo pair of monitor outputs and MIDI in/out in a compact interface.

  • MOTU lists RCA outputs alongside TRS outputs.
  • According to MOTU, the RCA outputs mirror the TRS outputs. For loopback on a Mac, MOTU lists an optional driver.

Arturia

The MiniFuse 2 is designed for a setup with two inputs, MIDI and an integrated USB hub.

  • Arturia lists two inputs, two outputs, MIDI in/out, a USB hub and loopback as features.
  • The two analogue outputs don't, on their own, provide a second independent stereo route.

Steinberg

The UR22C may be worth considering if you need inputs, MIDI and internal monitoring features as well as mixing.

  • Steinberg describes dspMixFx and a loopback function for streaming.
  • Steinberg's stated support for 32-bit/192 kHz doesn't, by itself, guarantee a better dance mix.

Audient

The iD4 MKII offers a stereo output and a headphone connection for a compact listening setup.

  • Audient specifies two analogue output channels.
  • Audient specifies a minimum USB power supply of 0,9 A at 5 V via a USB 3.0 port; check that your computer meets this requirement. The specifications don't list an additional independent stereo pair.

Related products

Related products coming soon.

Frequently asked questions

Do I need lots of inputs for a dance track created entirely on my computer?

Not just to mix the track. Start with the outputs for your listening setup; inputs become relevant if, for example, you want to record an analogue synthesiser or microphone.

How do I connect monitors and headphones?

Connect compatible active monitors to the stereo pair of line outputs and wired headphones to the headphone output on your interface. Check the connector type and which cables you need. Focusrite recommends connecting your headphones or monitors directly to the interface for monitoring, rather than using your computer's built-in output.

Should I always set the buffer as low as possible?

No. A smaller buffer can reduce latency when monitoring live, but according to Ableton it increases CPU load and may cause audio glitches in a demanding session. Test the setting with your own DAW and computer setup.

What can I do if my interface develops a fault after I buy it in the Netherlands?

If the product has been used normally and doesn't provide what you were reasonably entitled to expect, the seller must offer an appropriate free solution, such as a repair, replacement or refund, according to ACM ConsuWijzer. A manufacturer's warranty doesn't replace this legal right. Online purchases generally also come with a cooling-off period; according to ACM ConsuWijzer, it ends 14 days after delivery, with some exceptions.

Which product markings are relevant when buying in the Netherlands?

CE marking is required for products covered by specific harmonised EU rules that prescribe it. For electrical and electronic equipment on the EU market, the European Commission also describes the crossed-out wheeled bin symbol for separate collection, subject to exceptions. Check the markings on the item being offered.