Who needs an audio interface for choir recordings?

Editing existing choir recordings

You receive audio files and work in a student room. You mainly want to listen back clearly without buying recording equipment you don’t need. The Audacity Manual explains how to select a playback interface in the software.

Recording with two microphones

You want to record with two microphones as well as edit, and need suitable inputs and headphone monitoring. Focusrite and MOTU describe models with two microphone preamps or two combo inputs.

Recording separate choir tracks

You want to record several microphones separately during a single session. Behringer describes the UMC404HD as having four microphone preamps; Focusrite lists eight analogue inputs for the Scarlett 18i20 4th Gen.

What should you look for in an audio interface?

Editing existing files

Choose this if: you import choir recordings and can already play and edit them through your computer’s current audio output.

Trade-off: you won’t get any extra physical microphone inputs or connections.

Recording with two microphones

Choose this if: you want to connect two microphones at once and record their signals separately.

Trade-off: two inputs don’t give you four separate microphone inputs. Also check whether your microphones need phantom power.

Recording with more microphones

Choose this if: your recording plans require several microphones to be recorded simultaneously on separate tracks.

Trade-off: extra inputs are only useful if you use them at the same time. Also check the connections and the size of the complete setup.

What to consider What to look for Who is this important for?
Avoiding unused recording inputs Test whether your computer and headphones play your files properly, then decide whether you also need to connect microphones. If I’m only editing existing files, I don’t want to buy recording hardware I won’t use. Around 40% of consumers prioritise avoiding unused recording inputs.
Using two microphones at once Check that there are two suitable microphone inputs and whether the microphones need phantom power. If I want to use two microphones at once, I need to receive both signals separately. Around 30% of consumers prioritise having two simultaneous microphone inputs.
Using more than two microphones Count the microphones you’ll use at the same time and check which inputs have microphone preamps. If I want to record several choir microphones separately, the number of suitable inputs needs to match the session. Around 20% of consumers prioritise recording with more than two microphones.
Headphones and laptop Check the headphone plug, USB port, operating system and any power requirements against the documentation for the exact model. If listening through my laptop is my priority, I need a suitable headphone connection and a computer connection that works. Around 10% of consumers prioritise these connections over extra recording channels.

Common buying mistakes

  • Buying an interface just to edit existing files

    Editing software can use an existing playback device. Extra microphone inputs won’t automatically solve a playback or editing problem.

    Test your current listening setup first and work out which specific feature is missing before choosing an interface.

  • Assuming ‘two inputs’ means two microphone preamps

    On the Audient iD4 MKII, ‘2 in’ doesn’t mean two microphone preamps; the model specifications list one microphone preamp.

    Check the documentation for the exact variant to count the microphone inputs you can use simultaneously.

  • Looking only at the number of channels

    An interface also needs to work with your headphones and computer. Connections and power requirements vary by model.

    For the exact model, check the port, operating system, headphone plug and power requirements.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is an option for two microphones, while the Scarlett 18i20 4th Gen is designed for recording plans that need more inputs.

  • According to Focusrite, the 2i2 has two microphone preamps, while the 18i20 has eight analogue inputs.
  • The eight analogue inputs are a feature of the 18i20, not a specification of the 2i2.

MOTU

The M2 may suit a two-channel setup where separate headphone controls and clearly visible level meters are useful.

  • MOTU lists two combo inputs, a headphone output with its own volume control and bus power.
  • Two combo inputs won’t let you connect more than two microphones separately.

Behringer

The UMC404HD is designed for a setup with up to four directly connected microphones.

  • According to Behringer, this model has four combo inputs with microphone preamps and switchable 48 V phantom power.
  • Four inputs aren’t automatically necessary if you’re only editing existing files.

Audient

The iD4 MKII may suit you if you’re mainly looking for one microphone input and a headphone output.

  • The model specifications list one microphone preamp and a minimum bus power requirement of 0.9 A at 5 V via a suitable USB 3.0 port.
  • The ‘2 in’ label doesn’t mean you get two microphone preamps.

Steinberg

The UR22C is an option to compare for a two-microphone setup.

  • Steinberg lists two microphone preamps and a maximum converter resolution of 32-bit/192 kHz.
  • That maximum resolution alone doesn’t prove there’ll be an audible benefit when editing choir recordings that have already been recorded.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I need an audio interface to edit existing choir recordings?

Not necessarily. First, check whether your editing software can use your computer’s existing playback device. An external interface is mainly useful if you need connections or features that your current setup doesn’t have. The Audacity Manual explains how to select a playback interface.

How do I connect condenser microphones for a new choir recording?

Check the connections and power requirements of the exact microphones. MOTU lists switchable 48 V phantom power for the M2, as does Behringer for the UMC404HD. Only use it when the connected equipment requires it.

What should I check if a bus-powered interface isn’t working reliably?

Compare the power requirements of the exact model with your USB port. Audient lists a minimum bus power requirement of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII. This figure doesn’t automatically apply to other interfaces.

What warranty and cooling-off period apply to a purchase by a consumer in the Netherlands?

If a product doesn’t meet what you could reasonably expect when used normally, the seller must put things right, according to ACM ConsuWijzer. For online purchases from a business, a 14-day cooling-off period applies in many cases, subject to legal exceptions outlined by Rijksoverheid.

Can I share a choir recording without any restrictions?

Buying an interface doesn’t give you that right. An identifiable sound recording may be personal data. If the GDPR applies to the processing, you need a lawful basis; consent is one possible basis, as explained by Autoriteit Persoonsgegevens. Also check the music rights for the work and how you plan to use it. BumaStemra explains that permission is generally required when you use someone else’s music.