Editor of existing choir recordings
You want to listen back to and edit files without paying for recording inputs you won’t use. Bax Music notes that a computer’s built-in audio is often sufficient for everyday use.
If you’re editing existing choir recordings, you don’t automatically need an external audio interface: Bax Music notes that a computer’s built-in audio is often sufficient for everyday use. If you also want to record, two microphone inputs are suitable for a stereo pair, while recording separate tracks from more microphones requires more simultaneous inputs. Also check that the connections, volume controls and button positions work with your headphones, speakers and both desk heights.
You want to listen back to and edit files without paying for recording inputs you won’t use. Bax Music notes that a computer’s built-in audio is often sufficient for everyday use.
You want to connect two microphones at once and use the same desk for recording and listening back. Manufacturers such as Focusrite, MOTU and Audient offer models with two microphone inputs.
You want to record several microphones simultaneously onto separate tracks. Focusrite and Audient list eight built-in microphone preamps on specific models; check that this capacity suits your recording plans.
Choose this if: you only edit existing recordings and your computer’s connections and controls meet your needs.
Trade-off: you won’t add another device or cables, but you also won’t get extra microphone or monitor outputs.
Choose this if: as well as listening, you occasionally want to record a stereo pair.
Trade-off: two inputs won’t directly accommodate more than two microphones connected at the same time.
Choose this if: you want to record several microphones simultaneously onto separate tracks; Focusrite and Audient list eight preamps on specific models.
Trade-off: this recording capacity may not be necessary if you only edit existing files; also consider where you’ll put the device and how the cables will run.
Choose this if: you only need a few analogue inputs now but want the option to connect compatible external equipment later.
Trade-off: extra microphone inputs aren’t built in; expanding via ADAT requires additional compatible equipment.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Listening back to existing recordings | Check that your computer’s output works with your headphones or speakers and whether you need separate volume controls. | When editing existing choir files, I want to be able to listen back properly without paying for connections I won’t use. Around 33% of consumers prioritise listening back. |
| Recording two microphones simultaneously | Compare the number of suitable microphone inputs, the phantom power your microphones need and compatibility with your computer. | If I want to record a stereo pair, I need to be able to connect both microphones at the same time. Around 27% of consumers mainly want to use two microphones simultaneously. |
| Recording multiple separate tracks | Count the microphones you’ll use at the same time, and distinguish between built-in microphone inputs and digital channels that require extra equipment. Focusrite notes that the number of channels per ADAT connection decreases when the sample rate doubles. | When recording with several microphones, I want each one captured on its own track. Around 20% of consumers prioritise separate tracks. |
| Controls at a sit-stand desk | Check where the connections and buttons are, measure the space available and make sure the cables won’t snag when you adjust the desktop. | When I adjust my desktop, I want to be able to reach the controls and avoid putting strain on the cables. Around 20% of consumers prioritise positioning and ease of access. |
Digital expansion channels aren’t the same as microphone inputs on the device. Expansion via ADAT also requires compatible external equipment.
Count the built-in microphone preamps separately and check which connections are only available with extra equipment.
The extra recording capacity is intended for a different recording setup, not just playing back and editing files. Bax Music notes that a computer’s built-in audio is often sufficient for everyday use.
First, make a note of which devices you actually want to connect to your desk at the same time.
The position of the buttons and connections, as well as the cable routing, can affect how practical your setup is when you adjust the desktop.
Check that the controls are easy to reach and there’s enough room for the cables at both the lowest and highest desk settings. Arboportaal recommends changing your posture during screen-based work.
The fourth-generation Scarlett 2i2 is a compact option for a listening setup, with the option of connecting two microphones; the fourth-generation Scarlett 18i20 is designed for more simultaneous inputs.
The M2 is a two-channel option for anyone who values front-panel controls and easy-to-read levels.
The EVO 4 is a compact option for two microphones; the EVO 16 is a separate model for recording more microphones simultaneously.
The Babyface Pro FS is a compact option for anyone who wants to use separate routing and may want to expand digitally later.
The UR22C is a compact two-channel option for anyone who also wants to use MIDI in and out.
Not necessarily. If your computer’s output works with your headphones or speakers and you don’t need to connect microphones, your existing listening setup may be sufficient. An interface is useful if you need different audio connections or physical controls.
You need two simultaneous microphone inputs for a stereo pair. If you want to record more microphones at the same time onto separate tracks, count the inputs you need and check whether they’re built in or require extra equipment.
Position the interface so you can reach the buttons at both desk heights and the cables aren’t pulled taut. Arboportaal recommends a properly adjusted workstation and changing your posture when working at a screen.
Pay attention to the volume, how long you listen for and how often. According to the WHO, sound level, listening duration and frequency of exposure affect the risk of hearing damage. A volume control on the interface doesn’t, by itself, measure your actual sound exposure.
For distance purchases from a business, a 14-day cooling-off period applies in many cases. Rijksoverheid notes that exceptions may apply and distinguishes between buying from a business and buying from a private individual; check the terms and conditions for your purchase.