For a stereo cassette, you need two suitable line-level inputs: one for the left channel and one for the right. At a shared desk, a headphone output and direct monitoring are useful, but also check that you can hear the stereo image properly and keep an eye on recording levels. If your computer already has a suitable stereo line input, you may not need a separate interface.
Who is this for?
Transferring stereo cassettes
You want to record the left and right channels from your cassette deck separately and be able to distinguish between them while listening. Audacity recommends a line-level connection when using a suitable stereo output; Focusrite describes the Scarlett 2i2 4th Gen as having two mono line inputs and stereo monitoring.
Working quietly at a shared desk
You want to monitor the transfer through headphones rather than play audio through speakers. Audient says the EVO 4’s monitor outputs are muted as soon as you connect headphones.
Keeping an eye on recording levels
You want to check before and during the transfer that the signal isn’t clipping. MOTU specifies input and output meters on the M2; Audacity explains that clipping occurs when the incoming volume is higher than the software can record.
What should you look for when buying?
Start with the outputs on your cassette deck: for stereo recording, the left and right channels need to go to separate line-level inputs. Then check that the interface suits the way you want to monitor the audio and keep an eye on levels.
| What to consider |
What should you check? |
Who should prioritise this? |
| Stereo channels |
Check whether the deck has two outputs and whether the interface offers two suitable line-level inputs. Also check that direct monitoring plays the left and right channels separately. |
If I want to preserve and listen to both cassette channels separately, I check the inputs and the monitoring mode. Around 36% of consumers say accurate stereo transfer is their main consideration. |
| Headphone monitoring |
Check the headphone output, volume control, direct monitoring and any automatic muting of speakers. |
If I work at a shared desk, I want to listen without disturbing others through speakers. Quiet monitoring is the top priority for around 29% of consumers. |
| Recording levels |
Check whether the interface displays input levels, then make a test recording and check it in your recording software. |
For a long transfer, I want to spot peaks in time so I don’t discover a problem only after it’s finished. Level monitoring is the main priority for around 21% of consumers. |
| Connecting to your computer |
Check whether your computer has a suitable stereo line input and which cables will fit the deck’s outputs. |
If I want to find out whether my existing equipment will do the job, I check the port and make a test recording before buying anything new. Easy connection is the main consideration for around 14% of consumers. |
Common pitfalls
-
Assuming two inputs guarantee stereo sound
Recording channels and the direct monitoring mix aren’t the same thing. Focusrite also says that direct monitoring on the 1st and 2nd generation Scarlett 2i2 is mono.
Check the full model name and generation, and find out whether direct monitoring has a stereo mode.
If the monitoring mode doesn’t suit your setup, you may need another way to listen.
-
Connecting a cassette deck to any old microphone input
A microphone input isn’t automatically the right input for a line-level signal. Audacity recommends using a line-level input first when connecting a line-level source.
Compare your deck’s output with the specifications for your computer port or interface, and check which cables you’ll need.
You may need a suitable cable or an external USB interface if your existing connection isn’t suitable.
-
Recording a whole tape without making a test recording
When clipping occurs, peaks are cut off in the recording, so those parts aren’t captured accurately.
First, record a short section with some loud passages, check both channels and look at the levels in your recording software.
If you only discover clipping afterwards, you may need to repeat the transfer.
Brands to compare
Focusrite
The Scarlett 2i2 4th Gen is worth considering if you’re looking for two line channels and explicit stereo monitoring.
- According to the manual, you can use two mono line inputs for a stereo source and monitor directly in stereo.
- This doesn’t automatically apply to older generations: Focusrite says direct monitoring on the 1st and 2nd generation 2i2 is mono only.
Audient
The EVO 4 is an option if you often switch between headphones and speakers at a shared desk.
- Audient says the two inputs can be linked for stereo, and the monitor outputs are muted as soon as you connect headphones.
- Because of this automatic muting, you can’t use speakers and headphones at the same time through the monitor outputs.
MOTU
The M2 is worth considering if you want to read the levels on the interface itself.
- MOTU specifies two microphone/line inputs, a stereo headphone output and input and output meters.
- Meters are no substitute for a test recording or checking for clipping in your recording software.
Arturia
The MiniFuse 2 has two combo inputs and a separate volume control for the headphones.
- Arturia specifies microphone, instrument and line inputs, a headphone output and direct monitoring.
- When using a stereo cassette, check the monitoring mix. Direct monitoring alone doesn’t confirm that the left and right channels are being played correctly.
Behringer
The UMC202HD is a two-channel option for a line-level source.
- Behringer specifies two combo XLR/TRS inputs for line sources and more, plus a headphone output and direct monitoring.
- Before buying, check how direct monitoring routes the left and right channels if stereo playback matters to you.
Joybuy products
Related products will be available soon.
Frequently asked questions
Do I need two inputs for a stereo cassette?
If your deck has separate left and right outputs and you want to preserve both channels, connect them to two suitable line-level inputs. Set the recording to two channels as well, and check separately that direct monitoring plays in stereo.
How can I listen without disturbing colleagues through speakers?
Connect headphones, set the listening volume and check how the interface handles direct monitoring and any speaker muting. Audient specifically describes automatic muting for the EVO 4; don’t assume that other models work the same way.
What should I check before recording a whole tape?
Make a test recording, check both channels and look in your recording software to see whether any peaks are being clipped. Audacity recommends exporting a recording as WAV or AIFF before editing it.
Who is responsible if my audio interface develops a fault?
According to ACM ConsuWijzer, the seller is responsible under the statutory guarantee if a product doesn’t perform as you could reasonably expect under normal use. A manufacturer’s guarantee doesn’t replace that right.
Can I copy and share music from a cassette?
The Dutch Government permits a private copy for your own use, but not distributing or making it available to the public. So don’t assume that sharing it with colleagues counts as personal use.