For transferring a stereo cassette, choose an interface with two line inputs you can use at the same time, plus a headphone output. That lets you record both channels and monitor the incoming signal. Direct monitoring lets you hear the input, while you’ll need to play the recording back through your computer to hear the edited result. Don’t choose a built-in meter display on specifications alone: set up your workspace so reflections from the window don’t interfere with checking levels.
Who is this set-up for?
Transferring stereo cassettes
You want to record both channels at once and check the levels before transferring a whole cassette. That means you’ll need two suitable mono line inputs and the right connection for your cassette deck. The Audacity Manual and Focusrite User Guides explain the recording and connection checks for this task.
Working beside a bright window
You want to check recording peaks, even when daylight falls on your workspace. So, consider where the meters are positioned and reduce reflections. A display on the interface alone won’t guarantee that it’s easy to read in daylight. Arboportaal offers advice on setting up screen-based workstations.
Listening during the transfer
You want to hear the incoming cassette signal through headphones, then check the saved file afterwards. Check how the interface controls direct monitoring and playback through your computer. Focusrite, Behringer and Arturia describe direct monitoring as listening to the input.
What should you look for in an audio interface for cassette transfer?
First check that your deck can use two suitable line inputs at the same time. Then consider level monitoring, headphone monitoring and how you’ll position the interface in relation to the window.
| What to consider |
What should you check? |
Who is this important for? |
| Stereo channels and recording levels |
Check that the left and right channels can connect simultaneously to separate line inputs, and that your software is set to stereo. Make a test recording of a loud section. The Audacity Manual gives peaks around −6 dB on the recording meter as a practical guide, not a universal hardware specification. |
When I transfer a stereo cassette, I want to record both channels at once and check the peaks before transferring the whole tape. Around 36% of consumers give stereo recording and level control their highest priority. |
| Readability in daylight |
Check where the meters are positioned and whether you can also use the recording meter on your computer. For screen-based work, Arboportaal recommends positioning your line of sight parallel to the window. Reduce distracting reflections and check readability in your own set-up. |
When I record beside a bright window, I want to see the peaks without reflections making the display hard to read. Around 29% of consumers prioritise readability in daylight. |
| Headphone monitoring |
Check the headphone socket, volume control and direct monitoring controls. Direct monitoring sends the input straight to the headphone output; Arturia warns that monitoring directly and through software at the same time can cause an echo. |
When I want to listen through headphones during the transfer, I want to hear the incoming signal and be able to check the edited file separately afterwards. Around 21% of consumers give direct headphone monitoring their highest priority. |
| Connecting to your existing equipment |
Make a note of your deck’s outputs, your computer’s connection and your headphone plug. Then check which cables, any adapters and system requirements are compatible with the model you’ve chosen. |
When I want to use my existing deck and computer, I want to know in advance whether the connections and cables I need will work together. Around 14% of consumers prioritise compatibility. |
Common mistakes when transferring cassettes
-
Mistaking two inputs for one stereo input
On the Focusrite Scarlett 2i2 4th Gen, each jack input is mono. For a stereo source, use both input 1 and input 2.
Check that both inputs can be used as line inputs at the same time, which outputs your deck has and that your software is set to record in stereo.
If the connections aren’t compatible, you may need a different interface or an extra cable.
-
Assuming a built-in display will be easy to read in daylight
A meter display can show level information, but your workspace set-up still affects distracting reflections.
Check the display in the position you plan to use it, and consider using your computer’s recording meter as a second way to check levels.
-
Confusing direct monitoring with the saved recording
Direct monitoring lets you hear the incoming signal; it won’t automatically play back the result of any later editing in your software.
Listen to the input while recording, then play back the recorded file to check it.
If you only spot a problem after the transfer, you may have to record it again.
-
Overlooking the condition of your cassette deck
According to the Audacity Manual, deposits on the playback head can affect playback quality.
Check your deck and make a short test recording first, especially if the cassette is important.
Checking, maintenance or transferring the cassette again may take extra time.
Brands to compare
MOTU
The M2 is worth considering if you want to monitor levels on the interface itself during a stereo transfer.
- According to MOTU, the M2 has two combination microphone/line inputs, direct monitoring, a headphone output and an LCD with input and output meters.
- Check how easy the display is to read in your set-up. An LCD alone doesn’t tell you how clearly it will show up beside a bright window. Also check your computer’s system requirements.
Focusrite
The Scarlett 2i2 4th Gen is an option if you need two separate line channels and direct monitoring.
- The Focusrite User Guides describe two mono jack inputs. For a stereo source, use inputs 1 and 2. Turn off instrument mode when using a line-level source.
- Focusrite describes direct monitoring as listening to the input, not checking a file that has been edited afterwards.
Arturia
The MiniFuse 2 could suit you if you’re looking for two inputs and a control to balance the input against computer playback.
- Arturia lists two inputs, illuminated gain knobs that turn red when the signal is too high, and a monitor mix control.
- According to Arturia Support, monitoring directly and through software at the same time can cause an echo. Check the controls and indicators in the lighting conditions of your workspace, too.
Behringer
The U-PHORIA UMC202HD is a two-channel option for a line-level source, with direct headphone monitoring.
- Behringer specifies two combination XLR/TRS inputs for sources including line-level devices, plus a Direct Monitor switch and headphone control.
- Make sure the connections match your cassette deck’s outputs and check the levels with a test recording.
Audient
The EVO 4 is worth considering if you want to control the settings for both channels together when recording in stereo.
- Audient describes a stereo link for both inputs, including for a stereo line-level signal.
- The automatic level setting mentioned by Audient doesn’t guarantee that every cassette will record without peaks. Be sure to check a test recording.
Related products
Related products coming soon.
Frequently asked questions
How do I connect a stereo cassette deck?
Use the suitable audio outputs on your deck and connect the left and right channels to separate line inputs. Set your software to record on two channels. The cable you need depends on the connections on your deck and interface.
Will direct monitoring let me hear the result of noise reduction applied later?
No. Direct monitoring sends the incoming signal straight to the headphone output. To check the result, play the saved or edited file through your software.
What can I do if the recording meter reflects light from the window?
First, adjust your set-up. For screen-based work, Arboportaal recommends positioning your line of sight parallel to the window and using suitable blinds or curtains to reduce distracting reflections. Then check that the meter is easy to read in your workspace.
What should I check before a long or important transfer?
Make a test recording and check both channels and the peaks. The Audacity Manual also recommends checking the condition of the playback head and cleaning it. Keep an unedited recording for an important transfer.