Stereo cassette transfer user
You want to record the left and right channels from a cassette deck at the same time and check the levels during a test recording. The Audacity Manual explains how to digitise tapes using Audacity.
For a stereo transfer, choose an interface that lets you use two suitable line inputs at the same time and has a separate headphone volume control. Direct monitoring lets you hear the input signal, but also make a test recording and play it back to check what the computer has captured. The right connection depends on the outputs on your cassette deck, your cables and the recording features you need.
You want to record the left and right channels from a cassette deck at the same time and check the levels during a test recording. The Audacity Manual explains how to digitise tapes using Audacity.
You want to monitor the transfer through headphones and control the listening volume yourself, without using speakers. Behringer describes the UCA202 as having a headphone output with level control.
You want to distinguish the source signal you hear directly from what the computer has recorded. The Audacity Manual explains how to check recording levels and play back a recording.
Start by checking the stereo connection on your cassette deck. Then consider how you’ll listen while recording and how you’ll check the saved result.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Recording stereo channels | Check whether you can use two line inputs at the same time and whether your cables fit the outputs on your deck. | If I want to capture both cassette channels at once, I’ll look for a suitable stereo line connection. Around 36% of consumers prioritise stereo recording. |
| Listening quietly | Check the type of headphone connection and whether you can adjust the listening volume separately. | If I want to listen in a quiet study without speakers, a headphone output with easy-to-use volume control is important. Around 29% of consumers prioritise uninterrupted headphone listening. |
| Checking the recording | Look for direct monitoring, and also check whether you can play back a test recording. | If I want to hear what’s coming in and check what the computer has saved, I’ll want to do both. Around 21% of consumers prioritise checking the recording. |
| Matching the connections | Note the connectors on your deck and headphones. For jack inputs, also check the line or instrument setting. | If I want to connect my existing deck and computer, I’ll want to know in advance which cables I need. Around 14% of consumers prioritise compatibility with their existing equipment. |
On the Focusrite Scarlett 2i2 4th Gen, each jack input is mono. For a stereo source, you’ll need to use both inputs, and the connections on your cassette deck must be compatible.
Check whether two line inputs can be used at the same time on each model, and work out which channel will go into which input before you buy.
If the connectors don’t fit, you may need different cables or another interface.
Direct monitoring lets you hear the input signal, but it doesn’t confirm that the computer has captured both channels at the right level. Software monitoring can also introduce a delay, as the Audacity Manual explains.
Make a short test recording, check both channels and play back the saved file.
If you only spot a problem afterwards, you may have to play and record the cassette again.
The Behringer UFO202 has a switchable line/phono input. Behringer lists cassette decks as a source for its RCA connections.
If your cassette deck has a line output, use the line setting and check the level with a test recording.
Behringer says the UFO202 has stereo RCA inputs for sources including cassette decks. The UCA202 also has two analogue channels and a headphone output.
The Scarlett 2i2 4th Gen has two jack line inputs and stereo direct monitoring, with separate controls for the headphones and main outputs. These features are described in the Focusrite User Guides.
The MiniFuse 2 has two inputs, a headphone output and a control for mixing direct input audio with computer audio.
According to Audient, the EVO 4 has two analogue inputs that can be linked for stereo recording.
No, not if you’re only playing an existing file. If you want to record the left and right outputs from a stereo deck at the same time, check that the interface has two suitable line inputs.
You may be hearing both the direct input signal and the same signal through the recording software. Arturia recommends switching off one of these monitoring routes if both are active. The Audacity Manual notes that software monitoring can introduce a delay.
Play a loud section of the cassette and watch the recording meter. The Audacity Manual advises keeping the meter away from the far right and gives a peak of around −6 dB as a practical guide. Then make a short test recording and play it back. This is software advice, not a legal standard.
For a standard online consumer purchase, you generally have a 14-day cooling-off period from delivery, with some exceptions, according to ACM ConsuWijzer. This is separate from your statutory guarantee: the seller is responsible if a product doesn’t meet what you could reasonably expect with normal use. According to ACM ConsuWijzer, this guarantee isn’t always limited to two years.