Who is this choice relevant to?

Transferring stereo tapes

You want to record both channels of a stereo cassette and monitor them separately while transferring it. The Audacity Manual explains how to set up two stereo recording channels; also check whether the direct monitoring on your chosen model plays the left and right channels separately.

Checking the recording as you transfer it

You want to spot a missing channel or an excessively high level in good time. Check the level meters and how the input signal is routed to the headphones.

Digitising a cassette at home

First, check whether your computer’s line input is suitable. An additional interface is worth considering mainly if the available connection or monitoring isn’t up to the job.

What should you look for when buying?

For transferring cassettes, the connections, number of recording channels and monitoring options all affect your choice. The Audacity Manual explains how to use a suitable line input and two stereo recording channels.

What to consider What to look for Who will find this important?
Connection and stereo Check whether your deck has two outputs and whether the interface offers two line inputs that can be used simultaneously. I want to preserve and record the left and right channels of my stereo cassette separately. Around 36% of consumers therefore prioritise the right stereo connection.
Monitoring Look in the manual for a headphone output and, if you want to listen directly, an explicitly labelled stereo direct-monitoring mode. If I want to hear whether both channels are coming through while transferring, I check the monitoring route and channel playback. Around 29% of consumers make monitoring their top priority.
Recording level Check whether you can adjust the input level and see the levels on meters; test the level using a loud passage. I want to avoid distortion caused by an excessively high recording level and check the level in advance. Around 21% of consumers make level control their main consideration.
Existing equipment First check whether your computer has a suitable line input; if you’re considering an interface, also check which cables and computer connection you’ll need. If my current computer can already record the cassette properly, I don’t want to connect an extra device. Around 14% of consumers prioritise avoiding extra purchases.

Common buying mistakes

  • Assuming two inputs mean stereo monitoring

    Two recording channels and the way direct monitoring plays them back are separate features. So check whether you can hear the left and right channels separately when monitoring directly.

    Check the manual for the exact model. For example, the Focusrite Scarlett 2i2 4th Gen specifies a separate stereo direct-monitoring mode.

    If the direct-monitoring route doesn’t suit the way you work, monitoring through the recording software may be an alternative; check how the signal is played back.

  • Connecting a cassette deck to a microphone input

    A cassette deck outputs a line-level signal. A microphone input isn’t automatically suitable for this stronger signal and may also be mono.

    Check which outputs your deck has and use a suitable line input and cable.

  • Recording the whole cassette without checking the level

    An input level that’s too high can cause distortion. A test recording helps you avoid discovering the level is wrong only after a long recording.

    First, test a loud passage, check the meters and adjust the input level before recording the whole cassette.

Brands to consider for this setup

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you’re looking for two line inputs and explicit stereo direct monitoring.

  • The Focusrite User Guides describe two jack inputs for line-level signals, as well as separate mono and stereo direct-monitoring modes.
  • Check which generation you’re buying and which cables will fit your cassette deck’s outputs.

MOTU

The M2 has two combination microphone/line inputs, a headphone output and clear level meters.

  • MOTU describes its level meters and a monitor button for each input.
  • Sound On Sound notes that the M2 doesn’t have a control for mixing the direct input with the software output, as the M4 does. Also check how direct monitoring plays back the two channels.

Behringer

The U-PHORIA UMC202HD has two combination inputs for line-level sources and a Direct Monitor switch.

  • Behringer specifies two combination XLR/TRS inputs for sources including line-level signals.
  • Check the manual to see how the two inputs are played back as left and right channels during direct monitoring.

PreSonus

The Studio 24c is worth considering if you’re looking for two inputs and a control for mixing the input signal with computer playback.

  • PreSonus specifies two microphone, instrument or line inputs, a headphone output and level meters.
  • Check the manual to see how a stereo cassette is played back through the headphones when monitoring.

Arturia

The MiniFuse 2 is worth considering if you want to compare direct monitoring and adjustable recording levels.

  • Arturia describes direct monitoring for the MiniFuse 2.
  • According to Arturia, monitoring through the software at the same time can cause an echo. Check separately how direct monitoring plays back the stereo channels.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I connect my cassette deck to my computer’s microphone input?

You’ll generally need a suitable line input, not the microphone input. A cassette deck outputs a line-level signal, and a microphone input may be mono; check which connections your deck and computer actually have.

How do I record a cassette in stereo?

Connect the left and right outputs to two suitable input channels, then select two stereo recording channels in your recording software. Make a short test recording first and check both channels.

Why can I hear an echo while monitoring?

You may hear the same signal twice if direct monitoring and monitoring through your recording software are both switched on. Turn off one of these routes, then check that you can still hear the signal you want.

What’s the best thing to do after a successful recording?

The Audacity Manual recommends exporting a backup copy as a WAV or AIFF file, preferably to an external drive as well, before editing the recording. This is software advice, not a legal requirement.

Can I digitise music from my cassette and share the files?

According to the Dutch Government, you may make a private copy of a copyrighted work for your own use, but you must not distribute it or make it available to the public. This applies to private copying and does not give you permission to publish the work.