Who is this for?

Transferring stereo cassettes

You want to record both channels from an existing deck at the same time and listen along during the transfer. The Audacity guide explains how to record in stereo from a cassette deck.

Working quietly alongside colleagues

You want to listen to the cassette or recording through headphones, with an easy-to-reach volume control instead of speakers. Focusrite explains how to monitor directly through headphones and line outputs on the Scarlett 2i2 4th Gen.

Checking recordings carefully

You want to test the levels before a long transfer, then check the recorded file. The Audacity guide explains how to digitise cassettes.

What should you look for?

First, decide whether you want to make a new recording from a cassette or simply play existing files. For a new transfer, the key things to consider are the channel connections, headphone monitoring and level control.

What to consider What should you check? Who is this important for?
Recording stereo channels Check that there are two line inputs that can be used simultaneously, which outputs your deck has and whether the software can record in stereo. I want to capture the left and right channels from my stereo deck at the same time, without combining them. Around 36% of consumers say stereo recording is their top buying priority.
Listening along quietly Check the headphone connection, where the volume control is and whether direct monitoring plays the channels in stereo. In a shared office, I want to listen through headphones without disturbing colleagues with speakers. Around 29% of consumers prioritise private listening.
Checking levels and recordings Check the input level control and any meters. Make a test recording of a loud section, then play the file back. I want to check that loud passages don’t distort before making a long transfer, and listen back to the saved file. Around 21% of consumers give error checking top priority.
Connecting to existing equipment Note the exact connections on your deck, computer and headphones, and check the system requirements for the model you choose. I want the interface to work with the connections and computer at my workstation. Around 14% of consumers prioritise compatibility with their existing equipment.

Common buying mistakes

  • Counting only the number of inputs

    A stereo transfer needs two suitable signal paths. The number of inputs alone doesn’t tell you whether they’re compatible with your deck’s outputs.

    Check your deck’s connections and the line settings on the exact interface model before choosing.

  • Confusing direct monitoring with the recorded file

    Direct monitoring lets you hear the incoming signal, but not necessarily the recording saved by your computer.

    Make a test recording and play the file back to check what was actually captured.

  • Recording a whole cassette without checking the levels

    An input level that’s too high can cause clipping. Arturia says that distortion caused by clipping can’t be removed completely; the Audacity guide recommends monitoring the levels while recording.

    Test a loud section of the tape and, if needed, lower the input level before recording the whole cassette.

  • Looking only at the interface connections

    Your deck’s outputs, the interface’s inputs and your headphones’ plug all need to be compatible.

    Check the connections on your deck, interface, computer and headphones side by side before placing your order.

    If the plugs don’t match, you may need a suitable cable or headphone adaptor.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen is an option with two line channels, a headphone output and switchable mono or stereo direct monitoring.

  • Focusrite’s guide specifies a line setting for both front inputs and separate level controls.
  • Check which cables will fit your cassette deck’s outputs; these features don’t necessarily apply to other Scarlett models.

Arturia

The MiniFuse 2 combines two inputs with a headphone output and an adjustable mix of the input signal and computer playback.

  • Arturia describes direct monitoring and a separate volume control for the headphones.
  • Check your deck’s connection and the position of the direct mono switch if you want to assess channel separation while listening.

Steinberg

The IXO22 is worth considering if you want to choose between mono and stereo direct monitoring while recording.

  • Steinberg specifies stereo direct monitoring and a headphone output with its own volume control.
  • The manufacturer’s claims about sound quality aren’t an independent comparison for cassette transfer.

Behringer

According to Behringer, the U-PHORIA UMC202HD has two combination inputs for sources including line-level equipment, as well as direct monitoring.

  • The manufacturer describes the two combination inputs as suitable for line-level sources.
  • Check how you’ll hear both cassette channels through direct monitoring in your setup. Behringer’s claims about preamps and sound quality don’t prove that it will deliver better results for cassette transfer.

MOTU

The M2 has two mic/line inputs, a headphone output and, according to MOTU, a display with input and output meters.

  • Separate monitor and headphone controls can be useful when making test recordings.
  • Check the current computer requirements and which direct monitoring setting to use for stereo; the input type alone doesn’t determine this.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I get started with a stereo cassette transfer?

Connect the deck’s left and right outputs to suitable inputs, then set your recording software to stereo. Make a test recording and check the levels before recording the whole cassette.

Can I use direct monitoring to check the final recording?

No. Direct monitoring lets you hear the incoming signal. After making a test recording, play back the saved file to check the recording.

How can I stop a recording from sounding distorted?

Test a loud section and check the level meter before transferring the whole cassette. Lower the input level if the signal is coming in too high, and listen back to the test recording too.

Should I edit a cassette recording straight away?

First, keep an unedited recording as a backup. The Audacity guide recommends making a raw master copy before editing.

Can I digitise a cassette and share the recording with colleagues?

Don’t assume that a copy for personal use can also be shared. The Dutch Government states that a private copy for personal use must not be distributed or made public. Get permission if you want to share the recording with colleagues.