Who is this choice for?

Preserving stereo recordings

You want to record the left and right channels of a music cassette separately and check the transfer as you go. The Audacity Development Manual explains how to connect a stereo source, while Focusrite and Arturia describe stereo monitoring on specific models.

Listening at a small desk

You want to use your cassette deck and computer in a compact setup, with headphone and monitor controls close to hand. Dimensions and controls vary by model; MOTU, for example, lists the M2’s dimensions.

Occasional digitising

You want to transfer a few tapes without paying for features you don’t need, while still checking your deck’s output and the recording level. The Audacity Development Manual recommends using a suitable connection and warns against clipping.

What should you look for?

What to consider What should you check? Who is this important for?
Stereo channels and connections Check your deck’s outputs, the two suitable line inputs and which cables you’ll need. Test both channels with a short recording. If I want to preserve stereo, the left and right channels need to be recorded and checked separately. Around 36% of consumers say preserving both stereo channels is their top priority.
Monitoring and recording level Check the headphone output, the mono or stereo setting, and how you can assess the input level during a test recording. If I want to listen while recording and spot levels that are too high, the monitoring setting and level controls are essential. Around 29% of consumers prioritise monitoring and level control.
Space and controls Check the dimensions and the position of the connections, and make sure there’s room for plugs and cables. Also consider how easy it is to reach the headphone and monitoring controls. At a small desk, I want to position and use the interface without cables or controls getting in the way. Around 21% of consumers say desk space and accessible controls are their main concerns.
Simple connections First check whether your computer has a suitable stereo line-in. If not, compare only interfaces with the inputs and monitoring features you need for your transfer. If I only transfer a cassette now and then, I don’t want to pay for features I won’t use, but I still need the right connections and controls. Around 14% of consumers prioritise a straightforward transfer without unnecessary features.

Common buying mistakes

  • Mistaking a microphone input for a line-in

    A cassette deck’s line-out produces a stronger signal than a microphone input is designed to handle. This can amplify the signal too much.

    Check the connections on both devices and use a suitable line connection.

  • Using direct monitoring without checking the stereo setting

    When monitoring a stereo cassette in mono, the separate left and right channels may not be obvious.

    Choose stereo for stereo material and check the left and right channels with a short test recording. According to the Focusrite manual, the Focusrite Scarlett 2i2 4th Gen has separate off, mono and stereo settings.

    If you only notice a channel issue after the transfer, you may have to record it again.

  • Looking only at the number of inputs

    A deck’s RCA outputs won’t necessarily connect directly to the 6.35mm jack inputs on some interfaces.

    Before you buy, map out the connection from the deck’s output to both interface inputs and check which plugs you’ll need.

    Depending on the connections, you may need suitable cables or plug adaptors.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is a two-channel option if you need separate line inputs and an adjustable stereo monitoring setting.

  • Focusrite lists two 6.35mm line inputs, a headphone output and separate headphone control. The manual describes direct monitoring in off, mono and stereo modes.
  • If your cassette deck has RCA outputs, you’ll need suitable cables to connect them to the line inputs. This applies to the Scarlett 2i2 4th Gen, not every Focusrite model.

Arturia

The MiniFuse 2 suits a compact setup where you want two inputs and a control for balancing the direct signal with computer playback.

  • Arturia lists a monitoring mix knob and a switch that lets you listen to the inputs as a single mono signal if you prefer.
  • Check which cables you’ll need for your deck. When checking stereo cassettes, listen to each channel separately.

MOTU

The M2 is worth considering if you want visible input level meters and separate headphone control.

  • MOTU lists two mic/line inputs, a headphone output, level meters and hardware monitoring in mono or stereo. The unit measures 19,05 × 10,8 × 4,5 cm.
  • Leave room for cables and plugs as well as the unit itself. These specifications apply to the M2, not the whole M series.

Behringer

The UCA202 is a straightforward option if your cassette deck has compatible RCA outputs; the UMC202HD has a different input connection and mix control.

  • For the UCA202, Behringer lists two analogue inputs and a stereo headphone output with volume control. For the UMC202HD, it lists two combination inputs and direct monitoring with mix control.
  • Check whether the connections on each model suit your deck; these specifications don’t apply to every Behringer model.

PreSonus

The Studio 24c is an option if you’re looking for two line inputs, meters and a physical mix control.

  • PreSonus lists two mic/instrument/line inputs, a headphone output, meters and a control for mixing analogue input with computer playback.
  • Check how monitoring is set up for your stereo configuration; these features don’t represent a comparative performance test.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I connect my cassette deck’s output straight to my computer’s microphone input?

Use a suitable line-in for a line-out, not the microphone input. The Audacity Development Manual warns that a microphone input can amplify the stronger line signal too much. First check whether your computer has a separate line-in.

How can I check a long transfer before recording the whole cassette?

Make a test recording, listen to both channels when recording in stereo, and check the level for clipping. The Audacity Development Manual recommends avoiding clipping while recording; the right monitoring setting depends on your interface.

Should I buy an extended manufacturer’s warranty?

Not automatically. In the Netherlands, purchases are covered by statutory consumer guarantees; if a product is faulty, the seller must provide a remedy. Consider what additional rights a paid extended warranty offers, as advised by the Government of the Netherlands.

Can I digitise a music cassette and share the file?

The Government of the Netherlands says you may make a private copy of copyrighted music for your own use, but you must not distribute it or make it available to the public. Consider any other use separately.

Do online purchases always come with a 14-day cooling-off period?

No, not always. The Government of the Netherlands says that a 14-day cooling-off period applies to many distance purchases. Check the seller, the type of purchase and any applicable exceptions.