Who is this choice relevant to?

Stereo recording checker

You want to capture the left and right channels of a cassette separately and check for clipping with a test recording. The Audacity Manual explains stereo recording and recommends avoiding distortion caused by clipping.

Recording with two monitors

For example, you use one monitor for the recording and the other for additional information, and want to choose the right audio device for playback. Microsoft Support explains that when you have multiple audio outputs, you should select the device you want to use.

RCA cassette deck user

You want to connect your existing deck’s line outputs to your computer and are looking for a suitable left-and-right connection. The Audacity Manual lists the source’s line output as a connection option; Behringer describes the UCA202 as a way to connect RCA audio equipment.

What should you look for when buying?

Having two computer monitors isn’t, in itself, a reason to choose extra audio outputs. Microsoft Support recommends selecting the right playback device when several audio outputs are available. Choose extra connections only if you need them for your audio setup.

Simple RCA connection

Choose this if: your cassette deck has RCA line outputs and you want a straightforward stereo connection; the Behringer UCA202 is an example of this option.

Keep in mind: check the connections and monitoring options on the exact model.

Two-channel interface with direct monitoring

Choose this if: you want two separate line inputs and a headphone connection for listening to the recording; the Focusrite Scarlett 2i2 4th Gen has a stereo mode for direct monitoring.

Keep in mind: an RCA deck needs two suitable cable connections to the mono inputs; switch off instrument mode for a line-level signal.

Interface with extra audio outputs

Choose this if: you genuinely need additional audio routes alongside cassette recording, for example to drive different pairs of speakers.

Keep in mind: extra audio outputs don’t control an additional monitor; check how your software routes audio to the outputs you want.

Priority What to check before buying Who it’s for
Connecting a stereo signal Check the deck’s line outputs, two separate input channels and the stereo setting in your recording software. I want to capture the left and right channels separately and check both in a test recording. Around 31% of consumers prioritise preserving stereo.
Listening and checking levels Check for a headphone output and a suitable monitoring mode; make a test recording too, then listen back to the saved file. If I want to listen during the transfer and make sure the recording isn’t clipping, I need both monitoring and a way to check the recorded file. Around 31% of consumers prioritise listening and checking levels.
Choosing an audio device Check the selected playback device in your operating system and the recording and playback devices in your audio software. With two monitors, I want to know which device the sound is coming through, without buying extra outputs I don’t need. Around 23% of consumers prioritise choosing the right audio device when using two monitors.
Simple cabling Check whether your deck has RCA line outputs and which cable ends fit the interface inputs. If I want to connect my existing deck with as few unnecessary connections as possible, I focus on finding suitable cables. Around 15% of consumers prioritise a simple connection.

Common buying mistakes

  • Assuming two monitors mean you need two audio routes

    A monitor may appear as an audio output, but extra audio outputs on an interface don’t control an additional screen.

    First decide where you want to listen, then check which playback device is selected.

  • Assuming one stereo plug will fit into a single interface input

    The jack inputs on the Focusrite Scarlett 2i2 4th Gen are mono. A stereo deck therefore needs two separate input channels.

    Check the deck’s outputs against the inputs on the exact interface model before choosing cables.

  • Checking only the live monitor signal

    Listening to the input signal alone doesn’t confirm that the saved file has been recorded correctly or that it isn’t clipping.

    Make a test recording, check the peaks and listen back to the saved file before transferring the whole cassette.

    If you only check after recording a whole side, you may need to record that side again.

Brands to consider

Behringer

The UCA202 offers a simple way to connect RCA audio equipment; the UMC202HD has two combination mic/line inputs.

  • According to Behringer, the UCA202 has a stereo headphone output with its own volume control. Behringer says the UMC202HD has a direct monitoring control.
  • Check the inputs on the exact model; these two models don’t offer the same connection options.

Focusrite

The Scarlett 2i2 4th Gen is a two-channel option for a stereo deck, with the two line signals connected separately.

  • The Focusrite manual describes two mono jack inputs and a separate stereo mode for direct monitoring.
  • An RCA deck needs two suitable cable connections. Switch off instrument mode for a line-level signal; don’t assume these monitoring features are available on older generations without checking.

MOTU

The M4 is worth considering if you’ll use extra line inputs or audio outputs alongside recording.

  • According to MOTU’s specifications, the M4 has two additional line inputs, four jack line outputs and four RCA outputs.
  • The RCA outputs mirror the jack outputs. You don’t need this connection flexibility simply because you use two computer monitors.

PreSonus

The Studio 24c offers a two-channel option with line inputs, a headphone output and a mix control for listening to the input signal.

  • According to PreSonus, the Studio 24c has two combination mic, instrument and line inputs, and two main outputs.
  • For a stereo transfer, check how the monitor mix and recording software handle the two channels; these specifications don’t prove that it digitises cassette tapes better.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to buy four audio outputs because I have two computer monitors?

No, not just because of the monitors. Monitors and audio outputs have different functions. If you’re using Windows and sound is coming through the wrong monitor or device, check which playback device is selected. Extra interface outputs are only relevant if you need additional audio routes.

How do I connect a stereo cassette deck?

Where possible, use the deck’s line outputs and connect the left and right channels to two separate, suitable inputs. Select stereo in your recording software and make a test recording first. The cable ends you need depend on the connections on both the deck and the interface.

What should I check when transferring a cassette?

Make a test recording of a loud section and check that the signal isn’t clipping. The Audacity Manual suggests aiming for a peak around −6 dB. Listen back to the saved file; the manual also recommends exporting a recording as WAV or AIFF if you wish.

Can I digitise and share copyright-protected music from my cassette in the Netherlands?

The Government of the Netherlands says you can make a private copy for your own use, but you mustn’t distribute it or make it available to the public. Owning the cassette doesn’t mean that other uses are permitted.