If you’re only editing existing bass tracks and your computer’s headphone output works with your DAW, try that setup first. You don’t automatically need an audio interface for playback and editing, as Ableton explains. If you’re recording bass or want separate connections or monitor controls, choose an interface based on its instrument input, how many sources you want to connect at once and its USB power requirements. A USB-powered model only saves you a socket if the port you use can supply enough power.
Who might need an audio interface?
Editing existing bass tracks
You’re not recording anything new for now. Before using up a USB port and desk space on an interface, check whether your DAW and your computer’s current headphone output do the job. Ableton also explains how to use a computer’s built-in sound card.
Bassists who want to record
You want to plug your bass straight in and use a USB-powered setup. Look for an instrument input and check that your computer’s port can supply the power it needs. Focusrite, Audient and MOTU describe these connection options for specific models.
Creators with multiple recording sources
You may also want to connect a microphone, a second instrument or a MIDI device. Count the usable inputs and check which connections each model offers, as described by Focusrite, MOTU and Arturia.
What should you look for?
| What to consider |
What should you check? |
Who is this important for? |
| Power without an extra socket |
Compare the power requirements of the exact model with your computer port’s capacity. Also check whether any USB hub you use can supply enough power. |
If I don’t want to use an extra socket, I need to know that my computer port can power the interface. USB power is the top priority for around 29% of consumers. |
| Recording bass directly |
Check whether the input supports an instrument or Hi-Z signal, and how many sources you can use at once. |
If I’m recording a new bass part, I want to plug my bass straight into an input designed for it. Recording bass is the top priority for around 24% of consumers. |
| Monitoring while recording |
Check the headphone connection and monitor controls. If you want to hear your DAW effects, also look at software monitoring and any potential latency. |
While I’m playing, I want to hear myself through headphones and know whether I can hear the effects from my DAW. Monitoring is the top priority for around 18% of consumers. |
| Editing existing tracks |
First, test playback through your DAW and your current headphone output. Then work out which specific input, output or monitoring feature you’re missing. |
If I’m only editing existing tracks, I want to find out first whether my computer output and DAW already meet my needs. That’s the main buying consideration for around 18% of consumers. |
| Room for additional sources |
Count microphone preamps, instrument inputs and MIDI connections separately. Don’t assume the total number of inputs tells you how many microphone inputs there are. |
I may also want to connect a microphone, a second instrument or MIDI, so I’ll count the connections for each source type. Expandability is the top priority for around 12% of consumers. |
Pitfalls to avoid when buying
-
Buying an interface when you’re only editing existing files
Your computer’s current output may be all you need for existing audio, as long as your DAW and headphones work well with it. An interface only adds value if you need a specific connection or monitoring feature.
Test your current listening setup first and make a note of any features you’re missing before choosing a device.
-
Assuming USB power will work through any unpowered hub
Arturia warns that some unpowered hubs don’t supply enough power for the MiniFuse 2. Using a different power solution may mean you need another socket after all.
Compare the power requirements of the exact model with your computer port, and test the hub setup you plan to use.
-
Confusing direct monitoring with hearing DAW effects
Direct monitoring sends the input signal straight to the output. That means you won’t automatically hear amp simulation or other effects from your DAW. Software monitoring can introduce latency.
Choose the monitoring route that lets you hear what you want while playing. Avoid listening to the same signal directly and through your DAW at the same time. If you use software monitoring, set the buffer accordingly.
-
Assuming the total number of inputs means the same number of microphone inputs
Inputs can support different signal types. According to Focusrite, the Scarlett Solo 4th Gen has one microphone preamp as well as an instrument input. MOTU specifies two mic/line/Hi-Z combo inputs for the M2.
Count the connections for each source type if you want to record several sources at once, especially if you need two microphones.
Brands to compare
Focusrite
The Scarlett Solo 4th Gen is a compact option to compare if you want to connect one instrument and one microphone.
- Focusrite specifies an instrument input, a headphone output and USB-C for power and data.
- The Solo has one microphone preamp. Its specifications state USB 900 mA, so check that your computer port is suitable for your setup.
Audient
The iD4 MKII is a USB-powered option with a JFET instrument input and two headphone connections.
- Audient specifies one microphone preamp, a separate instrument input and monitor controls.
- Audient says many iPhones need an active USB hub to use the iD4 MKII. So USB power alone doesn’t guarantee that it will work with every host without an additional power source.
MOTU
The M2 is worth comparing if you need two flexible inputs, clear level meters or MIDI.
- MOTU specifies two mic/line/Hi-Z combo inputs and USB power.
- Check the M2’s system requirements for your computer. Extra inputs won’t add anything if you’re only editing existing tracks.
Arturia
The MiniFuse 2 combines two inputs with MIDI and a USB hub connection in a compact setup.
- Arturia lists power via the computer connection and direct monitoring.
- According to Arturia, some unpowered hubs don’t supply enough power. The built-in hub has a limit of 250 mA per connected device.
Joybuy products to consider
Related products will be available soon.
Frequently asked questions
Can you edit existing bass tracks without an audio interface?
Yes, if your DAW works as you’d like with your computer’s built-in audio and your current listening connection. An interface is most useful when you want to connect an instrument or need different inputs, outputs or monitoring options. Ableton explains how to use a built-in sound card.
How can you avoid an echo when monitoring your bass directly?
Don’t listen to the direct input signal and the same signal through your DAW at the same time. Choose the monitoring route that lets you hear the effects you want while playing. If you use software monitoring, be aware of potential latency.
What should you check if your laptop has few spare ports?
Check the USB connection, the power capacity of your laptop port and the cable supplied. Arturia warns that some unpowered hubs don’t provide enough power for the MiniFuse 2. Audient says many iPhones need an active hub to use the iD4 MKII.
What about warranties and returns when buying online in the Netherlands?
According to the Dutch government, you have 14 days to change your mind when buying at a distance; check whether any exceptions apply. In the Netherlands, there’s no fixed statutory warranty period. If a product isn’t as it should be, contact the seller.