Who is this choice relevant to?

Solo bassist recording at home

If you record bass directly, you’ll want to check the input level and monitor your playing while recording another take. Focusrite User Guides explain the instrument settings and monitoring options for Scarlett models.

Producer at an adjustable desk

If you switch between playing and listening back, accessible controls and a cable route that moves with the desk can make a difference. Check your setup at the desk heights you use.

Bassist using a second source

If you want to connect another audio source or MIDI equipment as well as your bass, check which inputs can be used at the same time. Focusrite, MOTU and Arturia manuals and product specifications list the connections available on each model.

What should you look for when choosing?

Start by counting the sources you want to record at the same time. Then decide what you need to hear while recording, and check that the controls and cables suit your adjustable desk setup.

What to consider What should you check? Who is this important for?
Recording bass directly Check for an instrument or Hi-Z mode, the number of inputs you can use at the same time, and level metering. If I mainly record bass directly, I want to choose the right input mode and check the level while recording. Around 36% of consumers prioritise recording bass directly.
Monitoring and playback Check the direct monitoring controls, headphone socket and monitoring settings in your recording software. When listening back, I want to know whether I’m hearing the incoming signal or the sound with a software effect applied. Listening and monitoring are priorities for around 29% of consumers.
Controls and cable routing Check where the connections are, and make sure cables don’t get pulled tight or trapped when you adjust the desk. When I adjust the desk, I want the controls to be within reach and the cables to move freely with it. For around 21% of consumers, their desk setup is their main purchase concern.
Second source or MIDI Count the audio sources you want to record at the same time, and check separately whether you need a five-pin MIDI connection. If I want to record a second source at the same time or connect existing MIDI hardware, I check which inputs really can be used simultaneously. Around 14% of consumers prioritise expandability.

Common buying mistakes

  • Counting every jack and XLR connection as a separate channel

    On the Focusrite Scarlett 2i2 4th Gen, connecting a jack disables the XLR input on the same channel. So the number of connectors doesn’t automatically tell you how many recording channels you can use at the same time.

    Count the sources you want to record simultaneously and check the channel assignments in the manual for the exact model.

  • Confusing direct monitoring with the sound of a software effect

    Hardware monitoring lets you hear the incoming signal, but it won’t automatically let you hear the version processed by a live plug-in.

    Choose your monitoring route based on what you want to hear while playing, and check the settings in your recording software.

  • Not checking cable routing at an adjustable desk

    Connections and controls aren’t in the same place on every model. With a moving desktop, your cable routing needs to work across the full height range.

    Check the connector positions and test your setup at the different desk heights you use. Make sure cables don’t get pulled tight or trapped.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen is designed for a single bass source, while the Scarlett 2i2 4th Gen has two instrument-ready inputs if you need a second channel.

  • Focusrite says both models offer direct monitoring. The 2i2 also features Auto Gain and Clip Safe.
  • On the 2i2, the jack and XLR connections on the same channel can’t be used at the same time. Check how many sources you need to connect simultaneously.

Audient

The EVO 4 is worth considering if you’re looking for a compact interface with an instrument input and a monitor mix.

  • Audient lists a JFET instrument input, monitor mix and Smartgain for the EVO 4. According to Audient, you can also adjust the gain manually afterwards.

MOTU

The M2 has connections and controls for a setup with more than one potential source.

  • MOTU specifies two mic/line/Hi-Z inputs, separate monitor switches for each input, physical level meters and MIDI.
  • According to the M Series manual, direct monitoring is the way to go if you don’t need to hear live plug-in processing. Sound quality hasn’t been compared between models here.

Arturia

The MiniFuse 2 is worth considering if you’re recording bass alongside a five-pin MIDI device.

  • Arturia documents a Guitar switch by the inputs, MIDI in and out, and a dedicated headphone volume control.
  • Arturia warns that some unpowered USB hubs may not provide enough power. Check your computer connection and follow the model’s power instructions.

Solid State Logic

The SSL 2+ MKII has connections for anyone who wants to use two headphones with separate level controls or additional outputs.

  • Solid State Logic lists Hi-Z instrument inputs, two independent headphone outputs and four balanced outputs for this model.
  • These extra outputs and headphone controls may not be necessary if you’re recording a bass track with just one pair of headphones.

Joybuy products

Related products coming soon.

Frequently asked questions

Should you enable direct monitoring if you want to hear an amp simulator while playing?

Not necessarily: direct monitoring lets you hear the incoming signal, while a live plug-in requires the software monitoring route. MOTU recommends hardware monitoring when you don’t need to process the live signal with plug-ins. Check your DAW settings so you know which route you’re hearing.

How do you connect a bass to the Arturia MiniFuse 2?

Arturia describes a 6.35 mm TS cable as the usual way to connect a bass, and includes a Guitar switch for the input mode. Once connected, check the recording level by playing as you normally would.

Can you connect a bus-powered interface through your existing USB hub?

It depends on the hub and the interface. Arturia warns that some unpowered hubs may not provide enough power for the MiniFuse 2. For other models, follow their own power specifications.

How can you stop cables getting trapped at a sit-stand desk?

Check the cable route at the different heights you use your desk. See where the connections are on your chosen interface, and make sure cables don’t get pulled tight or trapped.

What consumer rights apply to online purchases in the Netherlands?

According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after the product has been delivered, subject to legal exceptions. You’re also entitled to a legal guarantee if a product used normally doesn’t meet the standards you could reasonably expect. The retailer is your point of contact.

Is a CE mark a quality mark for an audio interface?

No. According to Business.gov.nl, the CE mark isn’t a quality mark: it indicates that the manufacturer declares the product meets the relevant EU product rules. So don’t judge suitability or sound quality on the mark alone.