Who might need an interface?

Editing bass tracks with headphones

You mainly work with existing recordings and want to control your listening volume at a shared desk without using speakers. Focusrite User Guides describes the Scarlett Solo 4th Gen as having a headphone output with its own volume control.

Recording bass and adding parts

You want to plug in your bass, check recordings and perhaps record new parts. Focusrite User Guides describes instrument inputs on the Scarlett Solo 4th Gen and Scarlett 2i2 4th Gen.

Listening together at one desk

You want to listen to the session at the same time as someone else. The number of headphone sockets and how they are controlled may affect your choice; Solid State Logic specifies two headphone outputs on the SSL 2+ MKII.

What should you look for?

First decide whether you only want to listen to existing tracks or record bass as well. Then compare the monitoring, headphone controls and connections with your workspace and computer.

Editing existing tracks only

Choose this if: you don't need to record an instrument and your current listening setup meets your needs.

Bear in mind: an interface takes up space and needs an extra connection; an instrument input adds no essential editing function if you only need to listen back.

Recording one bass and listening yourself

Choose this if: you want to plug in a bass directly and listen through headphones while recording.

Bear in mind: the number and type of inputs vary by model; check whether you also want to connect other instruments at the same time.

Adding bass alongside existing tracks

Choose this if: while overdubbing, you want to hear and control both the direct input signal and the computer playback.

Bear in mind: direct monitoring doesn't automatically let you hear software effects. According to Arturia, a smaller software buffer reduces latency but puts more strain on the processor.

Listening with two people

Choose this if: two people each need their own headphone connection at the same time; according to Solid State Logic, the SSL 2+ MKII has two headphone outputs.

Bear in mind: two outputs don't prove that each listener gets a separate mix; check the signal routing you need.

What to consider What should you check? Who should prioritise this?
Quiet, easy-to-control listening Check the headphone connection and volume control. If you listen together, consider whether you need two sockets and separate listening mixes. If I work without speakers, I want to adjust my headphone volume easily and, if needed, listen with someone else. Around 33% of consumers in this situation prioritise quiet, easy-to-control listening.
Recording bass directly Check how many instrument inputs you need at once, whether they have an instrument or Hi-Z setting, and which cable will fit. If I want to record new bass parts, I need to be able to connect my bass to a suitable input. Around 27% of consumers in this situation prioritise this recording capability.
Adding parts alongside existing tracks Look for direct monitoring or a monitor mix control. Check how your software handles the return of the same signal. When overdubbing, I want to hear my bass and the existing session without hearing the same signal twice. Around 20% of consumers in this situation prioritise monitoring while recording.
Workspace and computer Compare the exact model's system requirements with your computer and check where the instrument, headphone and USB connections are located. If the interface is going on a shared desk, I want the connections to be easy to reach and the model to work with my computer. Around 20% of consumers in this situation prioritise this practical fit.

Common pitfalls

  • Buying an instrument input when you only edit existing recordings

    An instrument input is designed for connecting an instrument. If you only edit existing tracks, the first question is whether your current listening setup falls short.

    Before comparing models, decide whether you really want to record new bass parts.

  • Confusing direct monitoring with listening to software effects

    The direct signal may sound different from the bass played back through effects in your recording software. If both listening routes are active at the same time, you may hear an echo.

    Choose between the direct and software listening routes, and test the setting before your overdub.

  • Assuming two headphone outputs mean two independent mixes

    The number of physical outputs doesn't, by itself, tell you how the signal is routed to each listener.

    If you're editing together, check the routing on the exact model rather than just counting the connections.

Brands to compare

These models from different brands give you a starting point for comparing connections and controls with the way you work; the features listed apply to the specific models.

Focusrite

The Scarlett Solo 4th Gen is designed for one instrument, while the Scarlett 2i2 4th Gen offers two instrument inputs if you need them.

  • According to Focusrite User Guides, the Solo 4th Gen has one switchable line/instrument input and a dedicated headphone volume control.
  • The 2i2 4th Gen manual describes two inputs for instruments such as a bass.

MOTU

The M2 is an option if you want two Hi-Z combo inputs and separate controls for headphones and monitors.

  • MOTU's M2 specifications list two mic/line/Hi-Z inputs and a headphone output.
  • Check the listed system requirements for your computer; one headphone output isn't a connection for two headphones plugged in directly.

Solid State Logic

The SSL 2+ MKII may be worth considering if two headphone connections and additional outputs matter to you.

  • Solid State Logic specifies two headphone outputs and four balanced outputs for this model.
  • Check the signal routing you need: two outputs don't automatically mean each listener gets their own mix.

Steinberg

The UR22C is worth a look if you want to use a Hi-Z input and a Monitor Mix control while recording.

  • Steinberg lists one Hi-Z input and Monitor Mix for the UR22C.
  • Check whether one instrument input is enough; the specifications mentioned match the listed colour versions, but don't automatically apply to other UR models.

Arturia

The MiniFuse 2 is an option if you want to control the balance between the direct input signal and computer playback.

  • Arturia describes the MiniFuse 2's Monitor Mix control as letting you hear the input signal directly through the outputs.
  • According to Arturia, a smaller software buffer reduces latency but increases processor load.

Joybuy products

Related products coming soon.

Frequently asked questions

How do I connect a bass to a Scarlett 2i2 4th Gen?

For this model, Focusrite recommends a 6.35mm-to-6.35mm TS mono cable and instrument mode. Set the input gain so the signal doesn't clip; for another model, check its own manual.

Why can I hear my bass twice while recording?

According to Arturia, this can happen if you hear the direct input signal and the software return at the same time. Check which listening route is active; when recording with software effects, set up the software monitoring you want.

Do I need a special headphone plug for the Scarlett 2i2 4th Gen?

Focusrite lists a 6.35mm TRS headphone socket for the Scarlett 2i2 4th Gen. If your headphones have a smaller plug, you'll need a suitable adaptor for this model; check the connection on any other model separately.

What are my rights if an interface I bought online isn't suitable or breaks too soon?

For an online consumer purchase in the Netherlands, ACM ConsuWijzer says you generally have a statutory 14-day cooling-off period from delivery, subject to legal exceptions. The legal guarantee is separate from any manufacturer's warranty: if a product breaks too soon during normal use, the seller must resolve the issue in line with the applicable rules.

How can I listen safely during long editing sessions?

Thuisarts advises keeping headphone music at a sensible volume and using a volume limiter if one is available. A powerful headphone output is no reason to listen at a higher volume.