When editing existing bass tracks, a suitable headphone or monitor output is important. If you also record new bass parts, choose an interface with an instrument input. One instrument input may be enough if you record one bass at a time, while extra inputs or physical meters are only useful if you’ll actually use them. For a small desk, allow room for cables too, and check each model’s USB requirements.
Who is this for?
Bass player recording new parts too
You want to connect your bass directly and monitor your playing without distracting, audible latency. Think about whether you want to hear the dry input signal or software effects. Focusrite describes direct monitoring as a direct listening path from the input.
Editor with limited desk space
You mainly work on existing tracks and need to consider where your headphone, monitor and USB cables will go, not just the size of the interface. Focusrite lists the Scarlett Solo 4th Gen as measuring 143 × 96 × 46,5 mm; remember to allow extra room for connected plugs.
Musician using several sources
You want to connect a microphone, line-level source or second instrument as well as your bass. PreSonus distinguishes between an instrument input and a mic/line combo input on the AudioBox GO, so check the input type for each connection.
What should you look for?
First decide whether you’ll only edit existing recordings or record new bass parts too. Then consider how many sources you’ll connect at once and how much room the cables will take up.
| What to consider |
What to look for when buying |
Who should prioritise this |
| Recording bass directly |
Check how many instrument or Hi-Z inputs the model has. The total number of inputs doesn’t tell you how many bass sources you can connect. |
If I want to record new bass parts, I need an input that’s suitable for the job. Around 33% of consumers make recording bass directly their top priority. |
| Monitoring while playing |
Check how direct monitoring works and whether you need to set up the software monitoring path separately. |
When recording a new take, I want to hear the bass alongside the existing track in the right balance. Around 27% of consumers prioritise monitoring while playing. |
| Space and cables |
Measure the space available and allow room for instrument, headphone, USB and monitor cables. |
On a small desk, I want room for the interface and its connected cables without them getting in the way of my workspace. Around 20% of consumers prioritise desk space and cable management. |
| Extra sources and your computer |
Compare the input types for the sources you’ll use at the same time, and check the model’s USB and power requirements. |
If I connect another source as well as my bass, it needs to work with a suitable input, and the interface must be compatible with my computer setup. Around 20% of consumers prioritise extra connections or computer compatibility. |
Common buying mistakes
-
Assuming the total number of inputs equals the number of bass inputs
A mic/line input isn’t automatically a second instrument input. PreSonus lists the AudioBox GO as having one instrument input alongside a mic/line combo input; MOTU specifies two mic/line/Hi-Z combo inputs for the M2.
Compare the input type for each channel, rather than relying on a label such as ‘2-in’.
-
Confusing direct monitoring with hearing software effects
Direct monitoring sends the input signal straight to the outputs. That doesn’t automatically mean you’ll hear a software effect while you play.
Before buying, decide whether you mainly want to monitor the direct signal or need to hear an effect from your software while recording.
-
Measuring only the body of the interface
The stated dimensions of the Scarlett Solo 4th Gen describe the unit itself, not the extra space its connected cables need. Focusrite lists connections on both the front and back.
Measure the available space and mark out where you plan to run the cables across your desk.
Relevant brands to consider
The features mentioned apply to the specific models below and aren’t a general assessment of every product from each brand.
Focusrite
The Scarlett Solo 4th Gen is an option if you want to connect one instrument directly and have a small workspace.
- Focusrite lists a front-mounted instrument input, direct monitoring and dimensions of 143 × 96 × 46,5 mm for this model.
- The model has one instrument input; the body dimensions don’t include space for connected cables.
PreSonus
The AudioBox GO is an option if you want to connect a bass and a separate microphone or line-level source.
- PreSonus lists one instrument input and one mic/line combo input, as well as a Mix control for monitoring.
- The mic/line combo input isn’t automatically a second input for a bass instrument.
Audient
The iD4 MKII is worth considering if you need a bass input, a microphone preamp and Monitor Mix.
- Audient specifies a JFET instrument input and two headphone outputs for the iD4 MKII.
- Audient states that this model requires at least 0,9 A at 5 V through a USB 3.0 port; check that your connection meets this requirement.
MOTU
The M2 is worth a look if two instrument-compatible inputs or physical level meters matter to you.
- MOTU specifies two mic/line/Hi-Z combo inputs and a screen with level meters.
- The stated dimensions of the unit are 19,05 × 10,8 × 4,5 cm; check whether you’ll still have enough room for cables.
Steinberg
The UR22C may suit a workflow where MIDI and the monitoring options in the UR-C range are useful too.
- Steinberg lists MIDI, Monitor Mix, and two inputs and outputs for the UR22C.
- According to Steinberg, this model has one Hi-Z input, not two.
Joybuy products
Related products coming soon.
Frequently asked questions
Do I need an instrument input if I’m only editing recorded bass tracks?
No, not for editing or listening to existing audio files. If you also want to record bass directly to your computer, check that the model you choose has a connection labelled as an instrument or Hi-Z input.
Why can I hear my bass twice when recording a new take?
This can happen when direct monitoring and software monitoring are both active. In this situation, Focusrite recommends muting the recording track’s software monitoring while keeping the backing track playing.
What should I check before connecting an interface to a USB hub?
Check the specifications for the exact model and the connection you’re using, including its power requirements. Audient states that the iD4 MKII requires at least 0,9 A at 5 V through USB 3.0; that doesn’t mean every hub will meet this requirement.
How should I look after an audio interface on a small desk?
Don’t pull on the cables to make room. MOTU’s manual says to disconnect the device from the computer before cleaning it and to use a dry cloth only. Follow the relevant manual for other models.
What are my rights when buying online in the Netherlands?
According to the Dutch government, many online distance purchases from a business come with a 14-day cooling-off period. If a product is faulty, you may have statutory consumer rights against the seller. Check who the seller is and which terms apply to your purchase.