If you mainly mix pre-recorded backing vocals, start by checking the headphone and monitor outputs, the volume controls and how much space the interface takes up once the cables are connected. If you also record new vocals, choose an interface based on how many microphones you want to use at the same time. Also check the monitoring options, computer compatibility and power requirements.
Who is this for?
Vocal mixer with limited desk space
If you mainly mix existing backing vocals and want to connect headphones or monitors without paying for recording features you don’t need, check where the cables and controls will sit, too. Focusrite and MOTU’s model information can help you compare connections and dimensions.
Creator recording new vocals
If you record new vocal parts as well as mixing, you’ll need to decide how many microphones you want to use at the same time, whether you need phantom power and how monitoring works. Focusrite, MOTU, Arturia and Focusrite describe relevant connections and monitoring features for their models.
Mixer who listens with someone else
If you want to check a mix with someone else using headphones, make sure the connections and volume controls suit the way you work. Audient lists two headphone sockets on the iD4 MKII.
What should you look for when choosing?
Start by thinking about how you listen to your existing vocal mix. Only factor in recording inputs or extra features if you actually need them.
| What to consider |
What to check before buying |
Who should consider this? |
| Listening connections and controls |
Check for a headphone socket and left and right monitor outputs, and make sure the controls are easy to reach on your desk. |
If I’m mixing existing vocals, I want to listen to my computer’s audio comfortably through headphones or monitors and adjust the volume easily. Around 30% of consumers prioritise listening connections and controls. |
| Space for the interface and cables |
Measure the space available and allow for cables at the front and back, not just the dimensions of the unit. |
On a small desk, I want to be able to reach the connections without cables getting in the way of my workspace. Around 30% of consumers focus first on the space needed and cable placement. |
| Recording vocals and monitoring at the same time |
Count how many microphones you want to connect at once; check the input type, phantom power and whether you want to monitor directly or through your DAW. |
If I’m recording new vocal parts, I want enough suitable microphone inputs and to know what I’ll hear while performing. Around 20% of consumers prioritise recording new vocals over other buying considerations. |
| Listening together on headphones |
Check how many physical headphone outputs there are and whether each listener can adjust their own volume and mix. |
If I want to review the vocal mix with someone else, I need to know whether we can both connect and how the controls work. Around 10% of consumers prioritise having a second listening position. |
| Computer, port and driver |
Check the system requirements and driver information for your computer; for the iD4 MKII, also check the power requirement specified by Audient. |
Before choosing an interface, I want to check that it will work with my computer, available USB port and recording software. Around 10% of consumers prioritise computer compatibility. |
Common buying mistakes
-
Confusing direct monitoring with the finished vocal mix
With direct monitoring, the input signal goes straight to the listening output. This means you won’t hear your DAW’s processing as part of that direct signal.
Use DAW playback to assess EQ, effects and balance. Use direct monitoring when recording a new part and you want to hear the live input signal.
-
Assuming two inputs means two microphone inputs
According to Focusrite, the Focusrite Scarlett Solo 4th Gen has one XLR microphone input and a separate instrument input. So the total number of inputs doesn’t tell you how many microphones you can connect at once.
Check the type of each input. If you might want to record with two microphones at once later, you may need an interface with two microphone inputs.
-
Measuring only the unit
The stated dimensions describe the unit itself, but connected headphone, monitor and USB cables take up space, too.
Map out your planned connections on your desk to scale before choosing based on the unit’s dimensions.
Relevant brands to consider
Focusrite
The Scarlett Solo 4th Gen is worth considering if you have limited space and connect no more than one microphone at a time.
- Focusrite lists one XLR microphone input, separate headphone and monitor volume controls, and a unit measuring 143 × 96 × 46,5 mm.
- The instrument input isn’t a second microphone input. Make sure you also leave room for connected cables.
MOTU
The M2 is worth considering if you want to connect two microphones at once and need clear, visible level meters.
- According to MOTU, the M2 has two combination inputs, separate 48 V switches, level meters and independent headphone volume control.
- Check the current system requirements for your computer before choosing a model.
Arturia
The MiniFuse 2 is a compact two-channel option to consider if you need MIDI or a USB hub as well as recording vocals.
- Arturia lists two inputs, two outputs, one headphone output, MIDI, a USB hub and a monitoring mix control.
- MIDI, the USB hub and the monitoring mix control aren’t essential extras if you’re only mixing pre-recorded vocals.
Audient
The iD4 MKII could suit a setup with two headphone connections and one microphone preamp.
- Audient lists two headphone outputs and one microphone preamp for the iD4 MKII.
- Audient specifies a minimum power requirement of 0,9 A at 5 V via USB 3.0. Also check whether both listeners need independent volume control.
Steinberg
The UR22C is worth looking into if you need MIDI, monitor mix or loopback as well as recording and mixing.
- Steinberg lists two inputs and outputs, MIDI, monitor mix and loopback.
- Steinberg describes loopback as a feature for streaming, among other uses; it isn’t essential for a standard vocal mix.
Joybuy products
Related products will be available soon.
Frequently asked questions
Do I need microphone inputs if I’m only mixing existing backing vocals?
Not to play back vocals already recorded on your computer. First decide how you want to listen to that audio through headphones or monitors. Microphone inputs are useful if you also record new vocals; if so, count how many microphones you want to use at once.
How do I set up an interface without latency or drop-outs?
Select the interface as the audio device in your DAW and use the appropriate manufacturer’s driver if your system requires it. Steinberg recommends a smaller buffer when recording to reduce latency, and a larger buffer when mixing to reduce the chance of drop-outs. Direct monitoring lets you hear a live input, but it isn’t the same as processed DAW playback.
Who should I contact if there’s a fault, and is the legal guarantee exactly two years by default?
For a consumer purchase, you should contact the seller to resolve the issue. According to the Dutch government, there is no fixed legal guarantee period in the Netherlands; what you can expect in terms of a product’s lifespan depends, among other things, on the product and the information provided at the time of purchase. A manufacturer’s guarantee is in addition to this.
Can I return an interface bought online if the controls don’t suit me?
When you buy online from a business, ACM ConsuWijzer says you generally have a statutory 14-day cooling-off period from delivery, subject to legal exceptions. Check the seller’s returns information before buying; don’t assume the same rules apply when buying from a private individual.
What conformity checks are relevant when buying in the Netherlands?
An electrical or electronic product covered by applicable EU rules must comply with those rules and carry a CE marking where required. The European Commission explains that CE marking is only mandatory for products covered by harmonised EU rules that require it; Directive 2014/30/EU concerns electromagnetic compatibility. Check the identity and documentation of the specific model on offer: CE marking is not a separate EU quality mark for sound.