Mixing existing vocal tracks
You’re not recording again and mainly want to listen through headphones or studio monitors. The number of microphone inputs is less important to you.
If you’re only mixing existing vocal tracks, focus on the headphone and monitor outputs and how well the interface works with your computer; you may not need extra microphone preamps. If you’re also recording new vocals, choose the number of simultaneous microphone inputs and the direct monitoring function to suit your workflow. Direct monitoring routes the input signal straight to the monitoring output, but won’t automatically let you hear DAW effects.
You’re not recording again and mainly want to listen through headphones or studio monitors. The number of microphone inputs is less important to you.
You mix and record new harmonies. Think about how many microphone inputs you need and how you want to hear the backing tracks and your own voice while recording. According to Focusrite Support, direct monitoring sends the input signal straight to the headphone or line outputs, as well as to the DAW.
You both want to be able to listen at the same time. Check whether the headphone outputs have separate volume controls and offer the mixes you need.
A good fit if: you’re not recording new vocals and mainly use headphones or monitors.
Bear in mind: extra microphone inputs aren’t automatically necessary for this workflow; focus on the monitoring outputs available.
A good fit if: you want to record new harmonies while mixing; count how many microphones you’ll use at the same time.
Bear in mind: direct monitoring lets you hear the input signal directly, but it’s not the same as listening to DAW effects.
A good fit if: the singer and mixer both want to use headphones at the same time.
Bear in mind: two connections don’t automatically mean two independent mixes. Solid State Logic specifies separately adjustable headphone outputs for the SSL 2+ MKII; also check that the signal routing meets your needs.
| What to consider | What to look for | Who is it important for? |
|---|---|---|
| Monitoring while mixing | Check the exact model’s headphone socket, monitor outputs and volume controls. | If you mainly balance existing vocal layers, you’ll want to listen through headphones or monitors that suit your setup; around 36% of consumers say monitoring is their top buying priority. |
| Recording new vocals | Count the microphones you’ll use at the same time and check the inputs, any 48 V phantom power and direct monitoring. | If you want to record new harmonies and hear yourself while recording, the number of inputs and the monitoring route are key; around 29% of consumers prioritise recording new vocals. |
| Listening together | Check the number of headphone outputs, separate volume controls and available routing. | If the singer and mixer are listening at the same time, you’ll want to check that each person gets the level and signal they need; around 21% of consumers make this their top priority. |
| Computer compatibility | Compare the exact model’s system requirements and any driver requirements with your computer and software. | If you want to use the interface with your existing computer and software, check compatibility first; around 14% of consumers put this at the top of their list. |
If you’re not recording again, the monitoring outputs and how well the interface works with your computer are more likely to determine whether it suits your setup.
First, make a note of whether you want to record new vocals and how many microphones you’ll need to use at once.
The number of sockets and separate volume controls doesn’t necessarily tell you which signals you can send to each pair of headphones.
Check the manual for the exact version to confirm both the volume controls and signal routing.
Direct monitoring doesn’t send the input signal through the software first. If direct monitoring and software monitoring are both active, you may also hear a delayed double.
Choose which monitoring route you want to use while recording, and turn off the other if necessary.
The Scarlett 2i2 4th Generation is worth considering if you want to record up to two microphones at once, as well as mixing.
The SSL 2+ MKII is worth considering if both the singer and mixer use headphones.
The iD4 MKII is an option if one microphone preamp is enough and you want two headphone sockets.
The M2 is worth considering if you’re looking for two microphone inputs and clearly specified monitor and headphone controls.
The UR22C is an option if you want two inputs and are also interested in the listed DSP mixing features when recording.
No, not if you’re only playing back and mixing existing tracks. Focus first on the outputs for your headphones and monitors; decide how many inputs you need only if you also want to record.
This can happen if direct monitoring and software monitoring are both switched on: you hear both the direct signal and the delayed DAW signal. Choose whether you want to hear the direct signal or DAW effects, and turn off the other monitoring route if necessary.
No, it depends on the model and operating system. According to the manual, the SSL 2+ MKII is class-compliant on Mac, while Windows requires the SSL USB Audio ASIO/WDM driver. Check the requirements for your model, computer and software.
Many online consumer purchases come with a statutory 14-day cooling-off period after delivery, although there are exceptions. ACM ConsuWijzer explains how this cooling-off period works. The seller is also responsible for the statutory guarantee if the product doesn’t meet what you can reasonably expect from it; the Netherlands Authority for Consumers and Markets says there is no fixed general guarantee period in the Netherlands.