Who is this for?

Listening to restored recordings

You compare original and edited files through headphones, so colleagues don’t have to listen in. To assess the audio that has been removed, it can also be useful to listen to the residual signal in Audacity, as described in the Audacity Manual.

Digitising a stereo archive

You assess the restoration and transfer analogue left and right channels. Check that the interface has two suitable line inputs and that you can monitor the recording levels; IASA provides recommendations for digitising analogue originals.

Managing multiple listening routes

You switch between headphones and other outputs, or need different mixes. Check whether the outputs on the specific model can genuinely be routed independently; a separate volume control doesn’t prove that they can.

What should you look for when buying?

Listening to existing files

Choose this when: you only play and compare restorations; prioritise the headphone output, its own level control and compatibility with your computer.

Trade-off: recording inputs aren’t a necessary reason to buy an interface for this playback task.

Digitising analogue stereo

Choose this when: you want to record two analogue channels at the same time; check the source outputs, line inputs and recording levels.

Trade-off: you’ll also need suitable connections and cables. IASA’s digitisation guidance applies to analogue originals, not to listening back to existing files.

Separate monitor mixes

Choose this when: headphones and other outputs need to receive different signals; check the routing options on the exact model.

Trade-off: extra outputs may require more configuration and add little if you use just one pair of headphones.

Consideration What to look for Who is this important for?
Comparing discreetly Check the headphone output, its separate level control and your software’s playback options. Compare the original and edited versions using the same listening route. If I want to assess restorations through headphones in the office without disturbing colleagues, I’m mainly looking for a listening route that’s easy to control; around 36% of consumers make discreet comparison their top purchasing priority.
Recording stereo Check for two line inputs that can be used simultaneously, the source connectors, suitable cables and the ability to monitor both recording levels. If I also want to transfer an analogue stereo source, I need two suitable channels and want to be able to check the levels; around 29% of consumers prioritise stereo digitisation.
Routing different signals Check the manual to see whether the headphones and line outputs can receive different mixes, and what software is needed. If I want to send different signals to my headphones and other outputs in the office, independent routing matters more than simply having a separate volume control; around 21% of consumers prioritise extra listening routes.
Connecting to your computer Compare your computer’s ports and operating system with the requirements of the exact model; also check any driver and power requirements. Anyone planning to use the interface with an existing office computer should first check that the connection and support are compatible; around 14% of consumers name compatibility with their computer as their top purchasing priority.

Common pitfalls

  • Assuming more recording inputs are better for existing restorations

    Extra inputs don’t carry out the software processing and won’t automatically help you assess files that have already been recorded.

    Start with the headphone output, level control and computer compatibility. Add recording inputs only if you also want to digitise sources.

    A more extensive range of connections can add controls you won’t use in a playback workflow.

  • Confusing a separate headphone volume control with a separate mix

    Level control and signal routing are different functions. A separate volume control doesn’t prove that the headphones can receive a different signal.

    Check the manual for the exact model to see whether it offers separate, routable mixes. Focusrite describes this feature for the Scarlett 4i4 4th Gen.

    If you need different signals, you may need another model or an additional routing solution.

  • Leaving source connections and recording levels until after purchase

    For a stereo transfer, the archive player’s outputs must connect to two suitable line inputs, and the levels must be usable.

    Compare the connectors on both source outputs with those on the interface, and make a test recording before transferring the full archive.

    Depending on the source, you may need suitable cables or a different connection solution.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for listening and recording with two line inputs, while the Scarlett 4i4 4th Gen offers more outputs and separate mixes.

  • According to Focusrite’s specifications, the 2i2 4th Gen has separate level controls for the headphones and main output.
  • Focusrite describes the 4i4 4th Gen as offering separate mixes for headphones and line outputs.
  • For the 4i4, Focusrite mentions an optional USB-C power supply if your computer doesn’t provide the required 1,5 A via USB-C; check that it suits your setup.

MOTU

According to MOTU, the M2 combines two inputs that support line-level signals with a headphone output and meters.

  • MOTU specifies separate level controls for headphones and monitors, along with meters for monitoring signals.
  • Check the published system requirements for the computer you want to use with the interface.

Audient

The EVO 4 is a compact 2-in/2-out option for a setup where two analogue inputs and two outputs are enough.

  • Audient specifies two analogue inputs, two analogue outputs and a headphone output.
  • Don’t assume it offers separate software mixes for headphones and speakers without checking the intended configuration.

Arturia

According to Arturia, the MiniFuse 2 has two inputs, two outputs and a headphone output.

  • Arturia describes a mix control that lets you blend the input signal with computer audio.
  • That mix control alone doesn’t prove that direct monitoring will let you hear the result of software-based restoration.

RME

The Babyface Pro FS is a more advanced option if its specific headphone connections and routing suit your work setup.

  • RME describes two parallel headphone outputs with separate amplifier stages.
  • Two connections don’t automatically mean you can play two independently selected programmes. Manufacturer claims of superior sound aren’t an independent comparison.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need two recording inputs to assess existing restorations?

No, not for playing and comparing files that have already been recorded. Two suitable line inputs are relevant if you also want to digitise an analogue stereo source at the same time.

Can direct monitoring let me hear what the restoration software has changed?

Not automatically: assess a software edit by playing the original and edited files in your audio software. Direct monitoring lets you hear the incoming signal or mix it with computer audio; the Audacity Manual also mentions listening to the residual signal as a way to check what has been filtered out.

What should I consider when connecting the interface and listening for long periods in the office?

Check the computer port, operating system and any driver or power requirements for the exact model. Keep the headphone volume at a sensible level. The Dutch Arboportaal describes measures for harmful noise in relation to daily exposure; employers must assess relevant noise risks.

What returns period or warranty applies when buying in the Netherlands?

For a consumer purchase, the seller is your point of contact if a product is faulty, as explained by the Rijksoverheid. Many online consumer purchases also come with a 14-day cooling-off period, according to the Rijksoverheid. If the office is making a business purchase, don’t automatically assume consumer rules apply; Business.gov.nl states that the statutory consumer guarantee does not apply to business-to-business sales.