Who is this guide for?

Archive listener

You check existing restoration files using headphones and want the volume control within easy reach on a small desk. Recording inputs aren’t your main reason for buying an interface.

Stereo transfer user

You listen to results and record material from an analogue stereo source. Two usable line inputs and careful recording-level adjustment are important factors when choosing an interface.

Flexible listening setup

You use both headphones and active speakers, and want to adjust the volume of each easily on a limited desk space.

What should you look for?

First decide whether you’ll only be playing back existing digital files or also recording analogue stereo material. The latter requires two line inputs that can be used simultaneously. You can then choose the outputs and controls, and work out how much desk space you need for your listening setup.

What to consider What should you check? Who is this important for?
Headphones and listening Check the connector size, volume control and specifications against your headphones’ requirements. Start at a low volume. When checking existing files for long periods, I want to be able to adjust the headphone volume directly and start at a comfortable level. Around 36% of consumers say controlled headphone listening is their top priority.
Analogue stereo transfer Check that there are two line inputs you can use simultaneously, that they connect to your playback device and that you can set the recording level. For digital copies of analogue material, IASA recommends at least 48 kHz and 24 bit. If you want to record both the left and right channels of an analogue source, you need two suitable inputs. Around 29% of consumers say analogue stereo transfer is their top priority.
Headphones and speakers Check which outputs have their own volume control and whether the headphone signal mirrors the monitor output. Arturia describes this mirroring on the MiniFuse 2. When switching between headphones and active speakers, I want to be able to control the volume for each output. Around 21% of consumers say switching between two listening setups is their top priority.
Space and connection Measure the space taken up by the device and its connected plugs. Also check that the exact model’s connection and power requirements are compatible with your computer. On a small desk, I don’t want to give up space for features I won’t use, but I still need stereo recording to be possible if I need it. Around 14% of consumers say a simple, space-conscious purchase is their top priority.

Common selection mistakes

  • Mistaking two outputs for two line inputs

    An interface can have two analogue outputs but only one analogue line input. According to Focusrite, the Focusrite Scarlett Solo 4th Gen has one analogue line input.

    Count inputs and outputs separately. Only insist on two line inputs you can use simultaneously if you also want to record an analogue stereo source.

  • Mistaking a separate headphone volume control for an independent listening mix

    According to Arturia, the MiniFuse 2’s headphone output mirrors the monitor signal, even though it has its own volume control.

    If you need different listening mixes, check the signal routing separately from the volume controls.

  • Comparing headphone power without considering the load

    Audient lists different output figures for the iD4 MKII at different headphone loads. A single figure therefore won’t describe every combination.

    Compare specifications on the same measurement basis and check that the output is suitable for your headphones.

  • Choosing extra routing without a specific use case

    RME’s independent routing via TotalMix FX is designed for those who genuinely need these extra options. It isn’t a demonstrated requirement for playing back a single stereo file.

    Decide in advance which physical outputs or separate mixes you need.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen is an option for playback if you don’t need a second analogue line input; the Scarlett 2i2 4th Gen is a good fit if you do.

  • Focusrite lists a headphone output and two balanced outputs for both models.
  • The Solo has one analogue line input. Check the model variant if you want to record an analogue stereo source.

MOTU

The M2 has two combo inputs and may be a good option if you also want to record analogue stereo. Consider the M4 only if you need the extra outputs.

  • MOTU lists separate monitor and headphone volume controls for the M2, as well as level indicators on the device.
  • According to MOTU, the M2’s RCA outputs are mirrored. This doesn’t mean they provide a second, independent stereo mix.

Arturia

The MiniFuse 2 is a compact option for connecting headphones and active speakers to one interface.

  • Arturia lists a dedicated volume control for the headphone output.
  • That output mirrors the monitor signal. Also check that the connections and software are compatible with your computer.

Audient

The iD4 MKII may suit a setup focused on playback, where you want to compare the headphone output with your own headphones.

  • Audient publishes output figures for different headphone loads. Only compare figures measured on a like-for-like basis.
  • The iD4 MKII doesn’t offer two analogue line inputs for standalone stereo transfer.

RME

The Babyface Pro FS is designed for a setup that needs more extensive routing to physical outputs.

  • RME describes independent routing via TotalMix FX.
  • If you’re only playing back a single stereo file, this extra routing isn’t a demonstrated necessity for the task.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need two inputs for existing digital archive files?

No, not for playback. Two line inputs you can use simultaneously are only relevant if you also want to record an analogue stereo source using the interface.

Which settings matter when transferring analogue archive material?

For digital copies of analogue material, the International Association of Sound and Audiovisual Archives recommends at least 48 kHz and 24 bit or higher. Also monitor the level while recording to avoid clipping. This transfer recommendation isn’t a setting requirement for playing back an existing file.

Can I connect headphones and active speakers at the same time?

That depends on the connections and signal routing of the model you choose. For the MiniFuse 2, Arturia describes a headphone output that mirrors the monitor signal and has its own volume control. So check both the physical connections and the routing.

How can I listen safely during long checking sessions?

Start at a low volume and consider both the sound level and how long you listen for. The World Health Organization gives 80 dB for up to 40 hours per week as an example. The position of an interface’s volume knob alone doesn’t indicate the sound level reaching your headphones.

What cooling-off period and warranty apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, online purchases of products generally come with a statutory cooling-off period of up to 14 days after delivery; check which exceptions apply. A product must also meet the standards you can reasonably expect when used normally. If it breaks down too soon, the seller must resolve the issue in line with the rules on statutory guarantees.