Who is this buying guide for?

Archive editor comparing versions

You listen to original and restored files and want to be able to adjust the volume accurately. The International Association of Sound and Audiovisual Archives advises applying processes such as noise reduction only to a copy of the unaltered archival transfer.

Archivist with limited power sockets

You work somewhere where an extra mains adapter would be inconvenient. So, check not only whether the interface is powered via USB, but also whether your computer port supplies enough power. Audient and Focusrite specify requirements that vary by model.

Stereo archive digitiser

As well as listening for quality checks, you want to connect an analogue stereo source. You’ll need two suitable line inputs that can be used at the same time, for example one for each channel.

What should you look for when choosing?

First decide whether you’ll only be listening to existing digital files, recording analogue stereo as well, or using several output routes. Also check that the available USB port can power the interface.

What to consider What to look for when buying Who is this important for?
Comparing files Check the headphone socket, volume control and compatibility with your computer and playback software. If I’m assessing original and restored files, I want to adjust the listening level straight away and keep the unedited transfer separate. Around 34% of consumers say comparative listening is their top priority.
USB power Compare the exact model’s power requirements with your computer port; also check whether a hub shares its power supply. In a workspace with limited power sockets, I want to know whether my computer can actually power the interface. Around 33% of consumers give top priority to avoiding the need for an extra power socket.
Recording analogue stereo Check for two line inputs that can be used at the same time, suitable cables and the correct line or instrument setting. If I’m digitising an analogue archival source, I want to connect the left and right channels at the same time. Around 20% of consumers put this capability first.
Multiple output routes Plan in advance which signals need to go to which outputs, and check that the routing you want is possible. If I want to connect other equipment as well as my headphones, I may need extra outputs. Around 13% of consumers give multiple output routes top priority.

Common buying mistakes

  • Assuming any USB port can power a USB-powered interface

    Power requirements vary by model. Audient specifies a minimum of 900 mA via USB 3.0 for the iD14 MKII. For the Scarlett 4i4 4th Gen, Focusrite describes an optional 5V power supply for cases where the computer does not provide 1.5 A via USB-C.

    Before relying on a setup without a mains adapter, check the exact model’s requirements and the power available from your computer or hub.

  • Assuming an interface with two inputs has two line inputs

    The Scarlett Solo 4th Gen has one jack input for a line or instrument signal and one XLR microphone input. These are not two equivalent line inputs for stereo recording.

    If you’re connecting an analogue stereo source, check specifically that two line inputs are available at the same time.

  • Assuming extra outputs or a USB hub offer unlimited expansion

    Arturia’s MiniFuse 2 hub supplies up to 250 mA at 5 V. MOTU describes the M2’s RCA outputs as mirrored, so they are not automatically independent extra mix outputs.

    Check the power consumption of connected devices and whether the outputs you want can be used independently.

Relevant brands to consider

Focusrite

The Scarlett Solo 4th Gen could suit you if you don’t need two analogue line inputs. The Scarlett 2i2 4th Gen has two line inputs, while the 4i4 4th Gen adds line outputs.

  • Focusrite explains how to connect a stereo source to two mono inputs on the 2i2 4th Gen.
  • According to Focusrite, the Solo has one jack input for a line or instrument signal, as well as an XLR microphone input. The 4i4 may need a separate 5V power supply if the computer does not provide 1.5 A via USB-C.

MOTU

According to MOTU, the M2 is USB-powered and has two microphone, line or instrument inputs, making it an option if you also want to connect an analogue stereo source.

  • MOTU specifies separate volume controls for the monitors and headphones, plus balanced TRS and RCA outputs.
  • According to MOTU, the RCA outputs are mirrored; they do not, by themselves, provide an independent second stereo mix.

Arturia

The MiniFuse 2 combines two inputs with a headphone output, MIDI and a USB hub, making it suitable for a workspace with several connection needs.

  • Arturia says it is powered through the USB connection to the computer and has a dedicated volume control for the headphone output.
  • The headphone output mirrors the monitor output. The built-in hub supplies up to 250 mA at 5 V and is not intended as a general power solution for devices with higher power requirements.

Audient

The iD14 MKII has two headphone outputs and additional connection options for those who genuinely need them.

  • Audient describes the iD14 MKII as fully USB bus-powered.
  • Audient specifies a USB 3.0 connection that supplies at least 900 mA. According to the manufacturer, a USB-C port supplying 1.5 A provides more headroom for the headphone output, so check which port is available.

Behringer

According to Behringer, the UMC202HD is a two-channel interface with two combination inputs that can also connect line sources.

  • Behringer describes direct input monitoring and a headphone output with its own level control.
  • This information about connections and controls is not an independent comparison of sound quality with other interfaces.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need two recording inputs to compare existing digital archive files?

No, not for that alone: start by choosing a suitable playback and headphone setup. Two suitable line inputs are relevant if you also want to digitise an analogue stereo source at the same time. When working with archival material, keep the unedited transfer and document any edits separately.

Will a USB-powered interface work without a mains adapter through any hub?

Not necessarily. Audient specifies a minimum of 900 mA via USB 3.0 for the iD14 MKII, while Arturia gives a maximum of 250 mA at 5 V for the MiniFuse hub. Compare the exact model’s power requirements with the power available from your computer port and hub.

What can I do if the interface doesn’t work properly after purchase?

For a consumer purchase in the Netherlands, a product must meet the standards you’re entitled to expect. The Dutch government identifies the seller as your point of contact if a product is faulty. For online purchases from a business, a 14-day cooling-off period also applies in many cases; conditions and exceptions may apply.

What should I look for in the CE marking on an audio interface?

CE marking is only required for products covered by harmonised EU rules that require it. The European Union’s Your Europe website describes CE marking as the manufacturer’s declaration that the applicable requirements have been met; it is not an independent listening test.

How can I listen for long periods safely?

Keep the volume down and take breaks. The World Health Organization stresses that both sound level and listening time affect the risk of hearing damage; a powerful headphone output is no reason to listen at a higher volume.