What should you look for?
First decide how you’ll listen to your files and what controls you need. Then consider recording inputs or extra listening options only if you have a specific use for them.
| What to consider |
What to look for when buying |
Who is this important for? |
| Playback and volume control |
Check the headphone and speaker connections, and whether you can control their volumes separately. Focusrite lists 32 mW at 33 Ω and 22 mW at 300 Ω for the Scarlett 2i2 4th Gen. These figures apply to the specified loads and don’t, on their own, determine how your headphones will perform. |
If I’m assessing existing files in a quiet room, I want to be able to connect my headphones or speakers appropriately and control the volume. Around 36% of consumers prioritise suitable playback. |
| Computer and software |
Check the system requirements and driver support for the exact model against your computer and playback software. For the M2, MOTU lists macOS 12 or later and Windows 11 23H2 or later, among other requirements. |
If I want to use the interface with my own computer, I want to know in advance whether its connections and software will work with my system. Around 29% of consumers prioritise computer compatibility. |
| Multiple listening options |
Work out how many independently controlled headphone and line outputs you need. Solid State Logic lists two independently controlled headphone outputs and four balanced outputs for the SSL 2+ MKII. RME describes TotalMix FX for the Babyface Pro FS. |
If I want to listen with someone else or use different outputs, separate controls and the right signal routing matter. Around 21% of consumers prioritise these listening options. |
| Analogue stereo transfer |
Check whether the model has two line inputs that can be used at the same time, and whether they’re suitable for the source signal. Focusrite and MOTU list two line inputs on the Scarlett 2i2 4th Gen and M2 respectively. For a turntable without a built-in phono preamp, Focusrite Support recommends connecting a suitable phono preamp before the line inputs. |
If I want to transfer an analogue stereo source as well as listen to digital audio, I need suitable inputs and may need a preamp designed for that source. Around 14% of consumers prioritise analogue stereo transfer. |
Audio interfaces at Joybuy
Related products coming soon.
Frequently asked questions
Do I need recording inputs for existing digital archive files?
No, not if you’re only playing the files from your computer. First choose the right playback outputs and an interface that works with your computer. Line inputs are relevant if you also want to record an analogue source.
Can I connect a turntable directly to two line inputs?
Only if the turntable already has a suitable phono preamp with a line output. Otherwise, Focusrite Support recommends using a phono preamp that’s suitable for the cartridge before the line inputs. Check which cables you’ll need too.
How do I connect the interface for the first time?
Follow the manual for the exact model, select the interface as the audio output on your computer or in your playback software, and start with the headphone volume turned down low. Check the model-specific requirements for drivers, USB and power beforehand.
What if the interface develops a fault too soon during normal use?
For a consumer purchase in the Netherlands, the retailer must supply a product that meets what you could reasonably expect. ACM ConsuWijzer explains that if a product is faulty despite being used normally, the retailer is responsible for providing a suitable solution at no cost. Your statutory rights aren’t simply limited to the length of the manufacturer’s warranty.
What product safety information should I check when buying in the Netherlands?
The relevant EU product rules apply to electrical and electronic equipment. Where those rules require CE marking, the product must carry it. Check the information for the specific item: a list of specifications doesn’t, on its own, confirm that the item complies with the rules.