Archival audio reviewers
You listen critically to restored files and want to connect headphones or speakers alongside a dual-monitor workstation.
Using two computer monitors doesn't determine how many audio outputs you need: choose based on your headphones, speakers and any separate listening routes. Extra outputs are useful if you want to listen to different audio mixes; suitable inputs matter if you also digitise analogue archive media. Check the routing, connections and software for your setup on each model.
You listen critically to restored files and want to connect headphones or speakers alongside a dual-monitor workstation.
You switch between speakers and headphones, or listen with someone else. In this case, how you want to control outputs and mixes will determine your choice.
You review restored audio and also connect an analogue source. Suitable line inputs and careful recording settings are important too.
Start with your listening setup and existing equipment. Then decide whether you need separate mixes or also want to record analogue sources.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Playback | Check that the headphone and speaker outputs work with your equipment, and see how you can adjust the level for each route. | If I mainly listen critically to restored files, I want a suitable, easy-to-follow listening route. Around 33% of consumers prioritise playback they can monitor. |
| Multiple listening routes | Count line outputs and headphone connections separately; also check whether the model offers independent mixes or volume controls. | If you switch between speakers and headphones, or work with a second listener, suitable separate routes can be useful. Around 25% of consumers give this their highest priority. |
| Computer and software | Check the operating system, required driver, USB connection and power supply, as well as the output selection in your playback software. | If I want to use the interface with my existing computer and software setup, it needs to be compatible. Around 25% of consumers prioritise this compatibility. |
| Digitising analogue sources | Check the line inputs and the output level of your source. For capturing analogue archival material, IASA recommends at least 24 bit and a minimum of 48 kHz; this is not a purchase requirement if you only want to listen to existing recordings. | If you want to transfer analogue media as well as review recordings, you need to consider the entire recording chain. Around 17% of consumers prioritise this task. |
The number of monitors you use doesn't tell you how many separate audio listening routes you need. A more advanced interface can add unnecessary settings and complexity if you only use one listening route.
Map out your audio chain first: computer, headphones, speakers and any second listener. Then choose the number of audio outputs you need.
Physical connections don't guarantee that you can control signals or volumes separately. On the MOTU M4, the RCA outputs are mirrored outputs; Audient lists two headphone connections, while SSL specifies two independent headphone outputs with separate volume controls for the SSL 2+ MKII.
For the exact model, check both the connections and the routing and separate volume controls. If it doesn't offer the routes you need, you may need additional equipment.
When digitising analogue media, the source, levels and recording settings also matter. The maximum sample rate alone doesn't tell you whether the entire transfer has been carried out carefully.
If you're digitising media, assess the whole recording chain. If you're only listening to existing files, don't let recording recommendations become a barrier to buying.
A Dutch product description of the Scarlett 4i4 lists two balanced line outputs in one place, while the Focusrite manual specifies outputs 1, 2, 3 and 4.
If the numbers don't match, check the full model name and the manufacturer's manual before deciding how to connect your equipment.
The Scarlett 4i4 4th Generation is worth considering if you want to set up separate mixes for headphones and line outputs.
The M4 is worth a look if you want four balanced line outputs and clearly visible level meters.
The iD14 MKII could suit you if you're looking for four line outputs, headphone connections and the option to expand digital inputs.
The SSL 2+ MKII is worth considering if two listeners each need their own headphone volume control.
The Babyface Pro FS is a more advanced alternative if you genuinely need flexible routing or digital connections.
No, not because of the monitors themselves. Choose the number of audio outputs based on the speakers, headphones and separate mixes you actually want to connect.
For the exact model, check the connection, power requirements and driver requirements for your operating system. For example, SSL requires a driver for the SSL 2+ MKII on Windows and describes the model as class-compliant on Mac.
No. IASA's recommendation of at least 24 bit and a minimum of 48 kHz applies to making digital copies of analogue archival material. It isn't a general legal or technical minimum requirement if you're only listening to existing files.
There is no fixed statutory warranty period in the Netherlands; you're entitled to a product that works properly, depending on what you can reasonably expect from it. For most distance purchases, you have a 14-day cancellation period. Check the terms and exceptions that apply to your specific purchase.
Not simply because you've restored a recording. According to the Dutch Government, you can't distribute or make copyright-protected music available to the public without permission; the stated exception for a private copy is for personal use.