Who is this buying guide for?

People assessing restored recordings

You mainly listen to files that have already been digitised and want to switch between headphones and monitor speakers, if available. The International Association of Sound and Audiovisual Archives describes monitoring as converting a digital signal back to analogue, so recording features don’t need to be your starting point.

Archive staff working in a bright space

You assess audio while daylight may make your screen or controls difficult to see. As well as the interface, the position of your screen and interface and your ability to block out sunlight all matter. Arboportaal recommends facing parallel to the window when working at a screen.

People who also digitise analogue media

You also want to record an analogue stereo source, so you need to assess not just the inputs but also the playback and preamp chain for the media in question. The International Association of Sound and Audiovisual Archives recommends a suitable preamp with playback equalisation for microgroove discs.

What should you look for?

First decide whether you’ll only be assessing existing files or also digitising analogue sources. Then choose the connections and controls that suit your listening setup and workspace.

What to consider What to look for when buying Who should prioritise this
Headphones and monitors Check that the headphone plug and connections for your active monitors are compatible. Also see whether the headphone and main outputs have separate volume controls; Focusrite lists this feature for the Scarlett 2i2 4th Gen. If I mainly assess existing files, I want to switch easily between headphones and speakers. Around 28% of consumers prioritise playback and suitable listening outputs.
Controls in bright daylight Consider the position and accessibility of the controls and display. Arboportaal recommends facing parallel to the window when working at a screen; check whether the display remains readable in your own setup. If daylight makes it harder to assess recordings, I want to see my screen and controls clearly without having to rely on a display. Around 22% of consumers give top priority to controls that are easy to use in daylight.
Recording analogue sources Check how many line inputs can be used at the same time and the permitted input level. For microgroove discs, the International Association of Sound and Audiovisual Archives also recommends a suitable low-noise preamp with playback equalisation. If I also digitise analogue media, I want to know whether both the inputs and the playback chain suit my source. Around 22% of consumers prioritise analogue digitisation.
Routing and levels Work out how many separate listening routes you need, and distinguish between level meters and independent signal routing. MOTU describes level meters on the M2; RME describes separate routing to physical outputs on the Babyface Pro FS. If I need several listening routes, I want to be able to send signals to the right outputs, not just read their levels. Around 17% of consumers prioritise routing.
Computer and equipment requirements Check the system requirements for the exact model, your computer and the USB port available. Audient specifies a minimum power supply of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII; also check your cables and any extra equipment required for your source. I want to know in advance whether the interface will work with my computer and existing connections, so I can complete my listening setup. Around 11% of consumers give top priority to compatibility and any additional equipment required.

Common pitfalls

  • Assuming an LCD solves the problem of sunlight

    A built-in meter and a workspace free from distracting reflections are two different things. The presence of an LCD doesn’t prove that its readout will remain easy to see in direct sunlight.

    First set up your workspace in a practical way, then decide whether a meter on the device would help your workflow.

  • Assuming a line input is all you need to connect a turntable

    A line input doesn’t guarantee that you can connect a turntable directly. For microgroove discs, the International Association of Sound and Audiovisual Archives recommends a suitable preamp with playback equalisation.

    First identify the media and playback equipment you have, then check which components you need for the full chain.

  • Confusing two headphone sockets with two independent mixes

    The number of sockets alone doesn’t tell you whether each output has its own mix or volume control.

    Check the manual for the exact model to confirm it offers the routing and independent controls you need.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen may suit listening through one pair of headphones and a stereo pair of monitors, with the option to use two recording channels.

  • Focusrite lists separate controls for the headphones and main output.
  • Separate controls don’t mean you get an independent listening mix for each output; also consider whether you need the recording inputs.

MOTU

The M2 is worth considering if you want to view input and output levels on the device.

  • MOTU specifies an LCD with level meters and separate monitor and headphone controls.
  • The specifications don’t guarantee that the display will be readable in direct sunlight. Consider where you’ll position the interface and screen.

Audient

The iD4 MKII is a compact option for playback and limited recording, with two physical headphone sockets.

  • Audient lists Monitor Mix, loopback and recording up to 24-bit/96 kHz.
  • Two sockets don’t prove that you can set up independent mixes. Audient also specifies a minimum USB power supply of 0.9 A at 5 V via a suitable USB 3.0 port.

Solid State Logic

The SSL 2 MKII is worth a look if two front-mounted headphone sockets would be useful.

  • Solid State Logic lists two headphone outputs on the front panel.
  • A manufacturer’s claim about driving headphones isn’t an independent test with your particular headphones.

RME

The Babyface Pro FS is worth considering if you need more extensive, individually configurable routing.

  • RME describes how TotalMix FX routes input and playback channels separately to physical outputs.
  • These features won’t necessarily be useful for playing a single stereo file; check whether your workflow calls for the extra routing options.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need recording inputs if the restored files are already on my computer?

Not if you’re only playing and assessing the files. In that case, start with suitable outputs and computer compatibility; recording inputs matter if you also want to transfer an analogue source. The International Association of Sound and Audiovisual Archives describes digital transfer and converting the signal back to analogue for monitoring.

Can I connect a turntable directly to a standard line input to transfer archive recordings?

Don’t assume you can. For microgroove discs, the International Association of Sound and Audiovisual Archives recommends a suitable low-noise preamp with playback equalisation; check the full chain for the media in question.

What can I do if daylight makes my screen or level meter difficult to read?

When working at a screen, position yourself so that you’re facing parallel to the window where possible, and use blinds if needed. This follows Arboportaal’s advice. An LCD on an audio interface doesn’t prove that its display will be easy to read in direct sunlight.

How can I reduce the risks of long headphone listening sessions?

Start at a low volume and don’t turn the sound up unnecessarily. Thuisarts also recommends using a volume limiter when listening through headphones or earbuds; check whether your playback setup has one.

What rights do you have when buying online in the Netherlands?

For eligible distance sales to consumers, you generally have a 14-day cooling-off period, according to the Dutch government. There are exceptions, and these rules don’t apply to online purchases from private sellers. If a product doesn’t comply with the agreement, the seller must provide a solution; check which terms apply to your purchase.