Who is this choice relevant to?

Guitarists who want to mic up their acoustic sound

If you want to tailor the sound by adjusting the microphone position, you’ll also need to consider background noise and when you record. Shure explains how microphone placement affects a recording.

Guitarists who want to record without a desk microphone

This option suits an acoustic guitar with a usable output for a built-in pickup. Focusrite and MOTU describe interfaces with instrument inputs for this type of direct connection.

Guitarists who want to capture two signals at once

If you want to record both a microphone and a suitable guitar pickup, check that both connections can be used at the same time on separate channels. Focusrite explains the channel routing on the Scarlett 2i2 4th Gen.

What should you look for?

Recording with a microphone

When: you want to shape the acoustic sound by adjusting the microphone position and can choose a suitable time to record.

Trade-off: the microphone can also pick up background noise. If unwanted noise is an issue, Shure recommends moving the microphone closer to the instrument or isolating the instrument.

Direct connection via a guitar pickup

When: your guitar has a suitable output and you want to record without an external microphone.

Trade-off: you’ll record the pickup signal, not a microphone recording of the acoustic sound.

Microphone and pickup at the same time

When: you want to capture both signals on separate channels during the same performance.

Trade-off: you’ll need two inputs that can be used simultaneously. The number of physical connectors doesn’t automatically tell you how many signals can be recorded at once.

The percentages show consumers’ main purchasing priorities when looking for an audio interface for acoustic guitar at a shared desk. Your recording method determines which connections you need; Shure explains how microphone placement and background noise can also come into play.

What to consider What should you check? Who should pay particular attention?
Microphone and background noise Check for a microphone input, whether your microphone needs 48 V, and whether you can position it effectively. If I want to shape the acoustic sound with a microphone, I also need to consider noise around the shared desk; around 40% of consumers prioritise microphone sound and placement.
Recording directly without a desk microphone Check whether your guitar has a suitable output and whether the interface has an instrument or Hi-Z input. If I have a guitar with a suitable output and don’t want to set up a microphone, a direct connection better suits how I work; around 30% of consumers prioritise this recording method.
Two signals at once Check whether the microphone and instrument can be used simultaneously on two separate recording channels on the exact model. If I want to capture both the microphone signal and the guitar pickup signal in one performance, I’ll check the channel routing; around 20% of consumers prioritise recording two signals at once.
Private monitoring Check for a headphone output and how direct monitoring combines the input signal with playback from your computer. If I’d rather listen through headphones at a shared desk, I’ll look at the monitoring options and controls; around 10% of consumers make private monitoring their top priority.

Common pitfalls

  • Counting physical connectors as simultaneous channels

    On the Focusrite Scarlett 2i2 4th Gen, using a jack input disables the corresponding XLR microphone input. So the four physical connectors aren’t four simultaneous analogue inputs.

    Plan in advance which microphone and guitar pickup you’ll connect to the two recording channels.

  • Assuming a higher sample rate will solve desk noise

    Microphone placement and unwanted background noise remain separate considerations, even with interfaces that advertise high digital resolution. Steinberg’s stated 32-bit/192 kHz specification doesn’t make background noise disappear.

    First decide whether you’ll record with a microphone, a pickup or both. Then consider which specifications matter to you.

  • Assuming the interface replaces all your other equipment

    You’ll need a microphone to record with one; for direct recording, your guitar must have a suitable output.

    Check the connections on your guitar, microphone and headphones, and see what’s included with the exact model.

    Depending on how you choose to record, you may also need a suitable microphone, cable or headphones.

Brands to compare

Focusrite

The Scarlett Solo 4th Gen is designed with separate instrument and microphone inputs; the Scarlett 2i2 4th Gen offers two analogue recording channels with a different input layout.

  • Focusrite says the Scarlett Solo 4th Gen has a direct monitoring switch, a headphone output and 48 V on the microphone input.
  • On the Scarlett 2i2 4th Gen, using a jack input occupies the corresponding XLR input. Check the channel routing if you want to record two signals at once.

Audient

The iD4 MKII has separate microphone and instrument inputs; according to Audient, the iD14 MKII has two microphone preamps.

  • Audient lists a JFET instrument input, 48 V phantom power, a monitor mix and two headphone connections for the iD4 MKII.
  • The iD4 MKII has one microphone preamp, so don’t assume this model can handle two microphones simultaneously.

MOTU

The M2 is worth comparing if you’re looking for two combo inputs and clearly visible level meters.

  • MOTU specifies two combo inputs for microphone, line or Hi-Z, each with separate gain control, phantom power and a monitor switch.
  • According to the manufacturer, the M2 has one stereo headphone output. These features alone don’t prove that its recording quality is better than other brands’.

Steinberg

The UR22C is designed for a setup with two microphone preamps, a Hi-Z input and MIDI connections.

  • Steinberg lists a monitor mix and DSP monitoring for the UR22C.
  • According to the product information, this model has one Hi-Z input. Its stated support for 32-bit/192 kHz won’t solve noise in the room.

PreSonus

The Studio 24c has two combination inputs for microphone, instrument or line, and a Mixer button to balance the direct input signal with computer playback.

  • According to PreSonus, the Studio 24c has a headphone output, level meters and a Mixer button for direct monitoring.
  • The listed features don’t show how the model will perform in your room or with your microphone.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need 48 V to record acoustic guitar?

Not for the guitar itself. Check whether your microphone needs phantom power; Focusrite lists 48 V on the XLR microphone input of the Scarlett Solo 4th Gen. For a guitar with a suitable output, use the instrument input designed for it.

How can I stop noise from the shared desk overwhelming my microphone recording?

Try different microphone positions and listen back to your recording. If unwanted noise is an issue, Shure recommends moving the microphone closer to the instrument or isolating the instrument. The most effective position will depend on your guitar and room.

Can I connect a microphone and guitar pickup to a Scarlett 2i2 4th Gen at the same time?

Yes, if you connect the microphone and the suitable guitar output to different analogue channels. Focusrite says that using a jack input disables the XLR input on the corresponding channel, so the four physical connectors don’t provide four simultaneous inputs.

What are my rights to a cooling-off period and a guarantee when buying online in the Netherlands?

According to ACM ConsuWijzer, when you buy online you generally have up to 14 days after delivery to change your mind; check whether a legal exception applies to your purchase. Statutory guarantee rights also apply: if a product doesn’t do what you could reasonably expect under normal use, the seller is responsible for offering an appropriate solution.

Should I check for a CE marking when buying an audio interface for the Dutch market?

Check the applicable EU product information and marking for the exact device, especially if you’re buying from a seller outside the EU. The Dutch government says electronic devices placed on the EU market must have a CE marking; this marking isn’t a performance test of the interface.