Who is this buying guide for?

Solo demo recorder in a reverberant room

You’re recording an acoustic demo and want to find out how much room sound a microphone picks up, and whether an instrument input would be useful. Shure describes placing a microphone close to the sound source as one possible approach when room acoustics are poor.

Recording vocals and an instrument at the same time

You want to connect two microphones at once and record their signals separately. Also consider microphone bleed and how the inputs work; Focusrite, Audient, MOTU and Steinberg all describe models with two microphone preamps.

Musician who needs monitoring

You want to hear yourself while performing and compare direct monitoring, level control and how the interface connects to your computer. Manufacturers describe different monitoring and level-assistance features for each model.

What should you look for?

Start by making a short test recording, then decide how many microphones you want to use at once. For challenging room acoustics, Shure recommends, among other things, placing the microphone closer to the sound source. The right position depends on your instrument and the sound you want.

What to consider What should you check? Who is this important for?
Room sound and microphone position Make test recordings from different positions, then decide how many microphone inputs you need. If the room is reverberant, I want to find out first whether a suitable microphone position will be enough before choosing extra inputs. This is the top priority for around 33% of consumers in this recording scenario.
Using two microphones at once Check the number of microphone preamps and whether a jack connection disables an XLR input. If I want to record vocals and an instrument at the same time, I need two separate microphone signals, and I’ll consider microphone bleed and phase. Around 25% of consumers prioritise simultaneous microphone inputs.
Monitoring and level control Compare direct monitoring, headphone sockets, level meters and how any gain or DSP features work. When I’m operating the recording myself while playing, I want to monitor my input signal and keep an eye on the level. Monitoring and level control are top priorities for around 25% of consumers.
Computer and setup Compare the USB and operating system requirements with your computer, and check which microphone, cable, headphones and software you already have. I want to know in advance whether the interface will work with my computer and existing recording setup. For around 17% of consumers, compatibility is their main concern when buying.

Common pitfalls

  • Expecting a more expensive interface to fix a reverberant room

    Microphone placement and room acoustics affect what the microphone records. A different interface won’t remove room reflections that have already been recorded.

    First, make short test recordings from different positions and listen to the results before choosing extra interface features.

  • Assuming two inputs mean two microphone inputs

    The total number of analogue inputs doesn’t automatically tell you how many microphones you can connect at once. For example, the Audient iD4 MKII has one microphone preamp.

    For simultaneous microphone recordings, count the actual microphone preamps and check whether any connections share an input.

    If you later decide you want to record with two microphones at once, an interface with just one microphone preamp may mean you have to replace your equipment.

  • Setting up two microphones without listening to the combined recording

    Differences in the time it takes the same sound to reach two microphones can cause phase problems.

    Listen to the combined recording too, and adjust the microphone positions if necessary.

Brands and models to consider

Focusrite

The Scarlett 2i2 4th Gen is a technical example to consider if you’re comparing two-microphone recording with monitoring and level-control features.

  • Focusrite says the Scarlett 2i2 4th Gen has two microphone preamps and mono and stereo direct monitoring.
  • Connecting a jack disables the corresponding XLR microphone input. 48V phantom power is applied to both XLR inputs.

Audient

The iD4 MKII is an example to consider for one microphone with a possible instrument connection; the EVO 4 has two microphone preamps.

  • Audient specifies that the iD4 MKII has one microphone preamp and an instrument input. According to Audient, the EVO 4 has two microphone preamps and Smartgain.
  • The iD4 MKII is therefore not designed for using two microphones at once. Smartgain on the EVO 4 doesn’t guarantee that every peak or unwanted room sound will be prevented.

MOTU

The M2 is a technical example to consider if you’re comparing two microphones, separate phantom power and clearly visible level meters.

  • MOTU specifies two combo microphone inputs, separate 48V switches and a display with meters.
  • Check that the documented computer and driver requirements are compatible with your system; these features don’t tell you whether your room acoustics are suitable.

Steinberg

The UR22C is an example to consider if you’re comparing two microphone preamps and monitoring with built-in effects.

  • Steinberg’s manual describes two microphone inputs and DSP monitoring with effects.
  • Effects can change the sound you hear while monitoring, but they won’t stop the microphone recording room reflections.

Solid State Logic

The SSL 2+ MKII is a technical alternative if, alongside two microphones, you’re looking for separate headphone or additional line outputs.

  • According to Solid State Logic, this model has two microphone preamps, two headphone outputs and four balanced outputs.
  • Those extra outputs aren’t necessarily needed for a simple acoustic demo. These specifications don’t provide a basis for making a general claim about the brand’s sound.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I always need two microphone inputs for an acoustic demo?

No. One microphone preamp is enough for a recording with one microphone. If you want to use two microphones at once, for example to record separate vocal and instrument tracks or a stereo pair, check that the interface has two microphone preamps. Having two analogue inputs alone doesn’t prove that it does.

How do I make a first test recording in an untreated room?

Record from different microphone distances and positions, then listen to the balance between the direct sound and the room reverberation. For poor room acoustics, Shure recommends, among other things, placing the microphone close to the sound source. The best position depends on your instrument and the sound you want.

What should I check before connecting a condenser microphone?

Check that the XLR microphone input you’re using provides the phantom power your microphone needs. On the Scarlett 2i2 4th Gen, Focusrite says the 48V button switches phantom power on for both XLR inputs at once, so also check what’s connected to the other input.

What are my rights when I buy an interface online?

For a qualifying online consumer purchase made at a distance in the Netherlands, you generally have a 14-day cooling-off period. There are exceptions, and a purchase from a private individual isn’t covered by the same definition. According to the Rijksoverheid, you’re also entitled to a product that meets acceptable standards; if there’s a fault, contact the seller. The Rijksoverheid states that the Netherlands has no fixed statutory guarantee period.

Is CE marking relevant for an audio interface sold in the Dutch market?

Yes. According to the Rijksoverheid, electronic devices placed on the EU market must carry a CE mark. Check the marking on the specific product you’re considering before you buy.