Who is this for?

Ensemble with simultaneous dialogue

If you’re recording three or four actors at once and want to edit their voices separately, count the actual microphone preamps, not just the total number of inputs. Audient, Focusrite and Zoom describe models with different numbers of direct microphone connections.

Small cast sharing headphone monitoring

If you’re recording one or two voices at a time, but the actors and director also need to listen in, count the headphone outputs separately from the microphone inputs. Audient, Zoom and MOTU specify different numbers of outputs.

Creator combining recording and editing

If you want to edit scenes and individual voice tracks clearly, decide whether you’ll record straight to a computer or also want the option to record standalone. Zoom and RØDE describe options for recording to a memory card and using the device as a computer interface.

What should you look for when buying?

Start by counting how many actors speak at once. Then consider monitoring and how you want to record and edit your audio.

What to consider What should you look for? Who is this important for?
Simultaneous voices on separate tracks Count the microphone preamps needed for your largest scene and check whether your microphones require phantom power. If three or four actors speak at once, you’ll want to be able to edit their voices separately; around 33% of consumers prioritise recording multiple voices simultaneously.
Monitoring in the booth Count the headphone outputs and decide whether each listener needs their own volume control. If actors and the director need to listen in at the same time, you’ll want to know whether everyone can connect directly; around 27% of consumers prioritise shared monitoring.
Recording and editing workflow Check which separate tracks are recorded, what they’re recorded to and how you can edit the files afterwards. If you want to record without a computer or edit voices as separate files, your workflow will determine which connections and storage options are useful to you; around 20% of consumers prioritise the recording workflow.
Sound in a small booth Test the setup with the microphones you plan to use, and listen for mic placement, sound bleed and headphone audio. If the booth sounds hollow or the microphones pick up each other’s voices, assess the microphone setup first; around 20% of consumers prioritise room acoustics.

Common pitfalls

  • Confusing the total number of inputs with the number of microphone inputs

    Four analogue inputs don’t automatically mean four direct microphone connections. Focusrite states that inputs 3–4 on the Scarlett 4i4 4th Gen are line inputs; the MOTU M4 has two microphone inputs and two additional line inputs.

    Compare the number of microphone preamps with the number of actors speaking at once in your largest scene.

    You may need extra preamps or a different interface to connect additional microphones.

  • Forgetting to count the headphones

    The number of headphone outputs isn’t determined by the number of microphone inputs. Audient says the EVO 8 has two independent headphone outputs; Zoom describes the PodTrak P4next as having four outputs with individual volume control.

    Before you buy, count how many actors and directors need to monitor the recording through wired headphones.

    If you have more listeners than built-in outputs, you may need a headphone splitter, amplifier and extra cables.

  • Planning to use four phantom-powered microphones without checking USB power

    Audient says that when the EVO 8 is connected via USB-A, it can provide phantom power to a maximum of two channels at a time.

    Check whether each microphone needs 48 V and whether the power available from your chosen connection meets the requirements for the number of channels you need.

    To power four channels at once, you may need a suitable power connection or a different recording setup.

  • Expecting built-in processing to fix a poor booth setup

    Processing features won’t automatically remove reflections or sound bleed. Shure recommends trying different microphone positions and distances when the acoustics are less than ideal.

    Test your planned setup with spoken scenes before relying on post-production.

Brands to compare

Audient

The EVO 8 is a computer interface for recording scenes with up to four directly connected microphones and two pairs of headphones.

  • According to Audient’s product specifications, the EVO 8 has four microphone preamps and two independent headphone outputs.
  • Audient says that a maximum of two channels can receive phantom power at once via USB-A. Check the USB-C power requirements if all four microphones need 48 V.

Focusrite

The fourth-generation Scarlett 2i2 and 4i4 are designed for setups with up to two directly connected XLR microphones.

  • Focusrite specifies two microphone preamps for the Scarlett 2i2.
  • According to the Scarlett 4i4 manual, inputs 3–4 are line inputs, so you can’t connect microphones directly to them. The 4i4 model name therefore doesn’t mean it has four direct microphone inputs.

Zoom

According to Zoom, the PodTrak P4next combines four XLR inputs, four headphone outputs, USB interface functionality and standalone recording to microSD.

  • Zoom describes separate recorded channels and individual volume control for the headphones.
  • Check that the model on offer is the P4next; features of the older PodTrak P4 don’t automatically apply to this model.

RØDE

According to RØDE, the RØDECaster Pro II is an integrated recording and mixing solution for productions using four microphones and hands-on mixing controls.

  • RØDE specifies four combo microphone inputs, four headphone outputs and several multitrack recording options.
  • The extra mixing and recording features are most relevant if you’ll use them in your production; product specifications aren’t an independent comparison of sound quality.

MOTU

The M4 is suited to computer recording with up to two directly connected microphones and additional line inputs.

  • MOTU specifies two XLR/TRS microphone inputs, two additional line inputs, direct monitoring and one headphone output.
  • On the M4, four analogue inputs in total don’t mean four direct microphone connections.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect four actor microphones to an interface with four inputs?

Not necessarily: the number of inputs isn’t the same as the number of microphone preamps. According to Focusrite, only inputs 1–2 on the Scarlett 4i4 4th Gen are for directly connected microphones; according to Audient, the EVO 8 does have four microphone preamps.

What should I check before connecting condenser microphones?

Check whether each microphone needs 48 V phantom power and whether it’s available on all the channels you need at the same time. Audient sets requirements for the USB-C power supply if you want to power four EVO 8 channels simultaneously; according to Audient, via USB-A a maximum of two channels can receive phantom power at once.

How can I deal with a hollow-sounding voice recording in the booth?

First, try different microphone positions and distances, and listen to the balance between the voice and the room sound. Shure also recommends trying closer microphone placement or isolation when the acoustics are less than ideal; changing the interface alone won’t fix the room sound.

What are my rights if an interface I bought online is faulty?

When you buy as a consumer in the Netherlands, you’re entitled to a product that meets the required standards, and the retailer is your point of contact if there’s a fault. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands. In many cases, distance purchases also come with a 14-day cooling-off period; check the applicable terms and exceptions.

Can I record recognisable actors’ voices and publish the audio drama?

That depends on the rights involved and how the recordings are processed. The Dutch government describes performers’ related rights, so make sure you agree with the actors on recording and publication. If recognisable audio recordings are personal data that you process, the Dutch Data Protection Authority says you need a lawful basis under the GDPR. Consent is one possible basis, but it isn’t automatically the only one.