Who is this relevant to?

Working from home in the attic

You mainly need Wi-Fi where you work and make calls. Compare the wired connection at your router with the Wi-Fi in the attic. The Consumers’ Association recommends a wired speed test to assess your internet connection.

A household with busy evenings

When several devices are online at the same time, you’ll want to consider both coverage and capacity. The Consumers’ Association warns that the Wi-Fi version alone does not tell you how well a system will perform.

Living somewhere without a cable route

If you can’t run an Ethernet cable upstairs, check whether a wireless mesh node can still maintain a strong enough connection to the network from an intermediate location. The Consumers’ Association recommends placing Wi-Fi nodes where they can reach each other.

What should you look for when choosing?

First, test your existing connection, then decide whether you mainly need better coverage in the attic, a wired connection between nodes or wireless coverage extension.

What to consider What should you look for? Who is this important to?
Coverage in the attic Test the Wi-Fi at your workspace and at possible intermediate locations; check how many nodes the set includes. When I work in the attic, I want a reliable connection there, not just good Wi-Fi next to the router. Around 33% of consumers put coverage in that location first.
Using multiple devices at once Check the Wi-Fi versions supported by your main devices and compare independent coverage and speed tests. When several devices are online at home in the evening, I consider both capacity and coverage. Around 25% of consumers give simultaneous use the highest priority.
Connection between nodes Check whether you can run a cable, whether the model supports Ethernet backhaul and which ports are available. If I have a cable route to the attic, I want to know whether I can connect the nodes that way. Without a cable, I need to assess where to place them for a wireless connection. Around 25% of consumers start by choosing between a wired and wireless setup.
Buying and managing your system Work out how many nodes you need and check firmware support, security settings and energy use in tests. I don’t want to add more equipment before I know where the problem lies, and I want to be able to manage the network properly. Around 17% of consumers put buying and management first.

Common pitfalls

  • Upgrading to a faster internet package without testing the Wi-Fi in the attic

    Your internet connection and your home’s wireless connection are two different parts of the overall setup. A faster package won’t automatically fix a weak Wi-Fi signal upstairs.

    First test the connection with a cable at your router, then test the Wi-Fi at your attic workspace.

  • Putting a wireless node somewhere the signal is already weak

    A mesh node needs to maintain a strong enough connection to the network itself in order to extend the connection further.

    Try an intermediate location and check the connection indicator or setup app. If floors are significantly weakening the signal, look into running a cable.

  • Assuming Wi-Fi 7 or a claimed top speed guarantees good coverage

    The Wi-Fi version alone doesn’t determine performance. Placement, the specific model and the devices you use all matter too. Models with the same name can also differ in their specifications.

    Before choosing, compare the exact set and independent coverage tests with your home and devices.

Brands to compare

TP-Link

Deco mesh systems are an option if you’re considering several Wi-Fi nodes. The Deco X20 set described by the Consumers’ Association includes two nodes.

  • The Consumers’ Association lists Wi-Fi 6, a guest network and Ethernet ports for the Deco X20 discussed.
  • Models with the same name can differ in hardware and support. The visible test rating does not substantiate a performance advantage.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range for anyone considering a wired connection between nodes.

  • ASUS describes Ethernet backhaul and a setup app for the XD5.
  • Ethernet backhaul requires a suitable cable route and support from the model you choose. Check the number of nodes in the set too; speed and coverage claims apply under specific conditions.

AVM / FRITZ!

The FRITZ!Repeater 1200 AX is an option for extending an existing home network, particularly if you use a FRITZ!Box.

  • AVM describes a LAN bridge configuration and integration with its own mesh network.
  • The mesh setup steps described apply under the stated FRITZ!Box and firmware conditions. A repeater does not automatically replace a complete router.

NETGEAR

NETGEAR describes the Orbi RBK352 as a Wi-Fi 6 set with one router and one satellite.

  • NETGEAR’s support page provides model-specific manuals and firmware information.
  • This information is not an independent comparison of coverage in the attic.

Linksys

Velop Pro 7 is a Wi-Fi 7 mesh option for anyone with specific wireless network requirements.

  • The Consumers’ Association describes a version with two nodes.
  • The visible test result is based on the three-node version. Wi-Fi 7 alone does not prove that coverage in the attic will be better.

Joybuy products

These product picks are wireless mesh systems for anyone looking to extend Wi-Fi coverage to several areas of their home.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 (2-pack), tri-band Wi-Fi 7

A set of two mesh units for anyone looking to extend Wi-Fi to an attic workspace.

Tri-band Wi-Fi 7.

View at Joybuy
TP-Link Deco X50 3-pack dual-band mesh system

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

Three mesh units give you several options for placing Wi-Fi around your home.

Dual-band Wi-Fi 6; 2.4 GHz and 5 GHz.

View at Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh system

Linksys Velop Pro 7, tri-band Wi-Fi 7

A mesh system with two nodes for anyone looking to use Wi-Fi in several areas of their home.

Tri-band Wi-Fi 7.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A mesh set with three units for anyone looking to extend Wi-Fi to different areas of their home.

Tri-band Wi-Fi 6E; 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy
TP-Link Deco XE75 3-pack tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

A mesh set with three units for anyone looking to extend Wi-Fi to several areas and considering wired connections at a Wi-Fi node too.

Tri-band Wi-Fi 6E; 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy

Frequently asked questions

How can you tell whether a different router will solve the problem?

Compare a test using an Ethernet cable at your router with Wi-Fi tests in the attic. If the wired connection is consistently slower than expected, first look into your connection or contact your provider. If it’s mainly the Wi-Fi upstairs that’s weak, consider the placement or adding an access point. The Consumers’ Association recommends a wired speed test to assess your internet connection.

Where should you put a wireless mesh node?

Don’t automatically put it where the Wi-Fi signal is already almost gone. Instead, test an intermediate location with as few obstructions as possible. Check the connection indicator or setup app; according to the Consumers’ Association, Wi-Fi nodes work best when they can reach each other.

Can you use your own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the right to choose your own router. Equipment connected directly to your provider’s network must meet technical and safety requirements. If necessary, ask your provider for the connection settings and keep the device up to date.

Do you need a permit or registration to use standard home Wi-Fi?

No. In the Netherlands, Wi-Fi falls under the conditions for licence-exempt use of radio frequencies, according to the Dutch Authority for Digital Infrastructure, with no notification or registration required. Set your router to use in the Netherlands.

What should you check after buying, to use it safely?

Install firmware updates, use a strong password and check the security settings. If you use additional Wi-Fi nodes, you can also consider energy use in independent tests; the Consumers’ Association includes this in its tests.