Who is this choice relevant to?

Uploading photo albums from the attic

If you want to send lots of photos from a converted attic, it’s important to distinguish between your Wi-Fi coverage and the upload speed of your internet connection.

A single attic room with poor coverage

A wireless extender may suit a problem in one location, as long as it can still receive a usable signal from the router somewhere in between.

Several rooms or an existing mesh network

If you also want coverage in other rooms, or want to add a node to an existing mesh network, check that your equipment supports the mesh feature you need.

What should you consider when choosing?

First test your connection with a cable by the router, then test over Wi-Fi in the attic. Use the results to work out where the connection is struggling.

What to consider What should you check? Who is this most important for?
Coverage between the router and the attic Check whether there’s still usable Wi-Fi somewhere in between; use the signal indicator if needed. If I need coverage in the attic, I want to know whether the extender can still receive a usable signal along the way; around 36% of consumers give coverage between the router and the attic their top priority.
Upload speed versus Wi-Fi speed Compare a wired upload test by the router with a Wi-Fi test in the attic. If my photo album uploads slowly, I want to know whether the connection itself or just the Wi-Fi is the limiting factor; around 29% of consumers mainly want to tackle slow photo uploads.
Connecting without a usable midway point Check whether you can run a network cable to an access point. If not, test powerline in the sockets you plan to use. If a reliable connection to the attic matters more than a simple installation, I want to weigh up the cable or powerline option; around 21% of consumers put this connection first.
Compatibility with existing equipment Note your router model and check the specific mesh technology and operating mode supported by the extender. If I want to extend my existing mesh network, I want to be sure the feature I need works with my router; around 14% of consumers give compatibility their top priority.

Common mistakes when choosing

  • Assuming the Wi-Fi speed on the box is the upload speed

    The stated Wi-Fi speed isn’t the same as the upload speed of your internet connection or the speed you’ll get in the attic.

    First test your connection with a cable by the router, then compare the result with Wi-Fi in the attic.

  • Putting the extender where coverage is worst

    A wireless extender needs to receive a usable connection from the router itself.

    Find a spot in between where the signal is still usable, and check the placement using the signal indicator.

  • Assuming every mesh device works with your router

    OneMesh, FRITZ! Mesh and AiMesh each have specific requirements. Standard repeater mode doesn’t prove that mesh features will be available.

    Check your exact router model and the mesh feature you need before relying on it.

  • Assuming powerline delivers a fixed speed through every socket

    Actual throughput depends on factors such as your electrical wiring and interference. The devolo Magic range is also incompatible with dLAN adapters.

    Check which adapters you already have, then test the connection in the sockets you plan to use.

Brands to consider

TP-Link

The RE705X is an option for a single problem area, with wireless extension or access point mode via Ethernet.

  • TP-Link lists Wi-Fi 6, a Gigabit Ethernet port and access point mode for the RE705X.
  • OneMesh requires a compatible OneMesh router. The stated Wi-Fi speeds aren’t measured upload speeds in the attic.

FRITZ!

The FRITZ!Repeater 1200 AX is designed for anyone looking for a compact extender with a LAN connection, particularly when used with a FRITZ!Box.

  • FRITZ! lists Wi-Fi 6 and one Gigabit LAN connection. A LAN connection to a FRITZ!Box is possible.
  • This doesn’t confirm that FRITZ! Mesh features will work with a router from another brand.

devolo

The Magic 2 WiFi next Starter Kit is a powerline option when the Wi-Fi signal doesn’t reach through the floor and running a network cable isn’t practical.

  • According to devolo, the kit uses your electrical wiring, and the Wi-Fi adapter has two Gigabit LAN ports.
  • The manufacturer warns that actual throughput depends on factors including interference and the quality of your electrical wiring. dLAN adapters aren’t compatible with Magic.

ASUS

The RP-AX58 can be used as a standard extender or as an AiMesh node with compatible ASUS equipment.

  • ASUS describes AiMesh use with a compatible router, and extender mode with many other routers.
  • Using it as an extender with another router doesn’t mean AiMesh features will be available.

Joybuy product picks

This selection includes powerline adapters, mesh Wi-Fi, wireless extenders and access points, offering different ways to extend Wi-Fi to an attic or another room. The Dutch Authority for Digital Infrastructure states that equipment in Europe must carry a CE mark; check that the version actually being sold has the correct marking.

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter kit

This powerline starter kit is suited to a setup that uses your existing electrical wiring to provide network coverage.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band (2.4 GHz/5 GHz) Wi-Fi 6 (802.11ax)

This three-unit mesh system is an option if you want to extend coverage across several rooms.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

The description lists three Gigabit Ethernet ports.

View at Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

This wireless Wi-Fi extender is designed to extend coverage to areas with a weak signal.

The product description lists 2.4 GHz and a stated speed of up to 300 Mbps; this isn’t a measured upload speed.

View at Joybuy
TP-Link TL-WA801N Wireless Access Point and Wi-Fi Network Extender

TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender

The TL-WA801N has range extender mode and access point mode. The latter is suitable when you can run a network cable to the desired location.

The description lists 2.4 GHz, Ethernet LAN up to 10/100 Mbit/s and a stated wireless speed of up to 300 Mbit/s. It also mentions two antennas, WPS and Passive PoE.

View at Joybuy
TP-Link Omada EAP613 Wi-Fi 6 access point

TP-Link Omada EAP613 Wireless Access Point (WAP)

This Wi-Fi 6 access point is suited to a wired installation in a suitable location; the product description mentions ceiling or wall mounting.

The description lists PoE, Passive PoE and DC as power options, and mentions mesh and seamless roaming.

View at Joybuy

Frequently asked questions

Will a Wi-Fi extender always make my photo album upload faster?

No. An extender can improve wireless coverage, but it won’t increase the upload speed of your internet connection. First compare a wired test by the router with the Wi-Fi connection in the attic.

Where should you place a wireless extender for the attic?

Place it where the router’s signal is still usable, not right in the corner with the worst coverage. Choose a spot in between and check the placement using the signal indicator.

Will a mesh extender work with any router?

No. Mesh features depend on the equipment and technology involved. Check your router model and the feature you need; standard extender mode doesn’t automatically mean mesh is available.

Is powerline speed the same through every socket?

Not necessarily: actual throughput depends on factors including your electrical wiring and interference. Test the connection in the sockets you plan to use, and check whether your existing adapters are compatible.

What should you look for when buying a Wi-Fi extender in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, only products with a CE mark may be sold in Europe, and the marking must be on the equipment. Check this on the version actually being offered.