Watching in the attic
You want to watch a live concert on a TV, laptop or phone, but walls and floors can weaken the Wi-Fi signal. The Consumentenbond identifies these obstacles as factors that can affect your connection.
Don’t rush to buy a new router: first, test your internet connection over Ethernet and compare it with the Wi-Fi in your attic. As the Consumentenbond explains, walls and floors can weaken the signal. If you can run a cable upstairs, a wired access point or mesh node is a sensible option. Without a cable, mesh performance depends on the connection between the nodes. If you’re streaming the concert yourself, check your upload speed too and connect your streaming computer via Ethernet where possible; Twitch recommends a wired connection whenever you can use one.
You want to watch a live concert on a TV, laptop or phone, but walls and floors can weaken the Wi-Fi signal. The Consumentenbond identifies these obstacles as factors that can affect your connection.
You’re streaming live video yourself, so you’ll need to check your upload connection and streaming settings as well as your Wi-Fi. Twitch describes bitrate as the amount of data you send during a stream.
You want better Wi-Fi upstairs without unnecessarily replacing your existing internet equipment or router features. TP-Link describes access point mode as a way to use Deco alongside an existing router.
First, check that your internet connection itself is working well. Then choose between running a cable, adding a wireless node or moving your router to a better position.
Choose this if: your wired connection works well and moving the router higher up or to a more central position noticeably improves Wi-Fi in the attic. The Consumentenbond points out that walls and ceilings can interfere with the signal.
Bear in mind: moving a modem or extending cables isn’t practical in every home. Check with your provider to find out what’s possible with your equipment.
Choose this if: you can run a network cable upstairs and want Wi-Fi there, or want to connect your streaming computer by cable.
Bear in mind: you’ll need to run a cable and may need extra equipment. TP-Link describes Ethernet backhaul as a way to connect Deco units by cable.
Choose this if: running a cable to the attic isn’t feasible, but an intermediate node can still connect to the main network.
Bear in mind: positioning and building materials affect the connection. Claimed speeds or coverage don’t guarantee a signal in your attic.
Choose this if: you also want to replace your router’s features, and tests suggest that one well-positioned router should reach the attic.
Bear in mind: a higher Wi-Fi specification alone won’t solve problems with your internet connection or poor router positioning.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Coverage in the attic | Compare a wired test by the router with Wi-Fi where you plan to watch. Check whether it’s possible to run a cable and add a Wi-Fi access point. | If I’m watching a concert upstairs, I want to know whether the connection will still work through the floors and walls; around 36% of consumers prioritise attic coverage. |
| Reliable streaming | Test your upload connection, try streaming in advance and check whether you can connect your computer via Ethernet. | If I’m streaming from the attic, I want to make sure my upload connection and computer setup are up to the task; around 29% of consumers give streaming reliability top priority. |
| Connecting to your provider’s router | Check whether the system has an access point mode, how to connect the main unit and which router features remain available in that mode. | I want better Wi-Fi upstairs without unnecessarily replacing my existing provider router; around 21% of consumers prioritise compatibility with their existing equipment. |
| Equipment and management | Find out how many units and cables the setup requires, and check the terms for additional features and firmware updates. | I want to know in advance what equipment and ongoing management my setup will require; around 14% of consumers give this consideration top priority. |
Your actual connection depends on factors including walls, floors, obstacles and where your Wi-Fi points are positioned. The speed quoted on the box doesn’t, on its own, tell you whether the connection will be good enough in your attic.
Test the connection where you’ll be watching or streaming, then decide what kind of setup you need.
TP-Link describes router and access point modes for Deco, but not a repeater mode that lets a main unit connect wirelessly to any existing router.
Check the connection diagram and decide whether router mode or access point mode is right for you.
A stated manufacturer’s warranty doesn’t necessarily tell you everything about your statutory rights. ACM ConsuWijzer distinguishes between statutory guarantees and warranties from the retailer or manufacturer.
Keep your proof of purchase and contact the retailer if there’s a fault. Consult ACM ConsuWijzer for information about the rights that apply to your product and situation.
The Deco X50 range is a Wi-Fi 6 mesh option with optional Ethernet backhaul. The X50-PoE is a separate model with PoE and flexible mounting, according to TP-Link.
The RT-AX58U is a standalone Wi-Fi 6 router that can also be used as an access point or AiMesh node, according to ASUS.
The Orbi RBK763S is a Wi-Fi 6 mesh kit with a router and two satellites, for anyone considering multiple Wi-Fi points and a dedicated connection between the router and satellites.
The FRITZ!Repeater 3000 AX is an additional Wi-Fi point, particularly worth considering if you already use a FRITZ!Box.
This selection includes mesh kits, a wired access point and a standalone router for Wi-Fi in multiple areas or connectivity in the attic. Before buying, check that the connection mode works with your existing router and that the exact model has the required CE marking.
No image available
A two-unit mesh kit for Wi-Fi in multiple areas, with wired or wireless backhaul, according to the product description.
The description lists Wi-Fi 7 and 10, 2.5 and 1 Gbps WAN/LAN ports per unit.
No image available
A three-unit mesh kit for Wi-Fi in multiple areas; the product description lists two Ethernet ports per unit.
The kit uses dual-band Wi-Fi 5. According to the product description, the Ethernet ports support speeds of up to 100 Mbps.
No image available
A wired access point for adding Wi-Fi in the attic; the description lists ceiling or wall mounting.
The product description lists Wi-Fi 7, a 2.5 GbE port and PoE+ (802.3at). You’ll need a compatible PoE+ power supply, and the description says it’s managed through UniFi Network.
No image available
A standalone router for anyone looking to replace their existing router; the product description also mentions extending coverage with compatible AiMesh routers.
The router uses dual-band Wi-Fi 6. The instructions explain how to connect it to a modem via Ethernet and recommend placing it centrally.
No image available
A three-unit mesh kit for Wi-Fi in multiple areas; TP-Link describes Ethernet backhaul for the Deco X50.
The product description lists three Gigabit Ethernet ports per unit. When used alongside an existing router, the main unit must be connected via Ethernet in access point mode; some gateway features won’t be available.
Not straight away. First, compare a wired speed test by the router with the Wi-Fi connection in the attic, and try moving the router to a better position. If the wired connection itself repeatedly underperforms, look into your internet service or contact your provider.
With a compatible Deco system, you can keep your existing router and use Deco in access point mode. TP-Link describes an Ethernet connection between the existing router and the main unit; some Deco router features won’t be available in this mode.
Check not only your Wi-Fi coverage, but also your upload connection and video bitrate settings. Twitch recommends connecting your streaming device by cable where possible if you’re having connection problems. Check the requirements of the concert service you’re using too.
Check the connection mode and setup diagram for the system you choose. For Deco, TP-Link describes access point mode with an Ethernet connection from the main unit to the existing router; some Deco router features won’t be available in this mode.
Check that the exact model has the required CE marking and keep your proof of purchase. ACM ConsuWijzer explains statutory guarantees and manufacturer’s warranties; consult its guidance to find out which rights apply to your product and situation.