Who is this choice relevant to?

Designers working in the attic

You’ll want to know whether there’s a usable connection at your upstairs workstation and whether it’s possible to run a network cable to that floor. The Dutch Authority for Digital Infrastructure points out that 5 GHz has a shorter range than 2.4 GHz.

Studios with lots of devices in use at once

You may need enough wired connections and a suitable link between Wi-Fi points. Advertised Wi-Fi speeds don’t guarantee the throughput available to every user.

Managers of a shared network

You’ll need to decide who will install updates and how visitors will get access. Also check which network and security features are available on the version you choose.

What should you consider when choosing?

Keep or replace a single router

Suitable if: the connection on both floors is already usable after repositioning the router.

Trade-off: you keep the setup simple, but a single access point won’t necessarily solve poor coverage through a floor.

Mesh with a wired connection

Suitable if: you need Wi-Fi in several places and can run a network cable between the nodes.

Trade-off: the nodes can be connected via Ethernet, but this requires extra equipment and may involve running cables. Follow the connection instructions for the mode you choose; TP-Link describes different wiring for router and access point modes.

Wireless mesh

Suitable if: running a cable isn’t practical and you can position a node somewhere with a good enough connection to the other node.

Trade-off: you avoid running cables, but the connection between nodes still depends on their position and any obstacles.

Add a wired access point

Suitable if: your current router meets your needs and you can run a network cable to the attic.

Trade-off: you add Wi-Fi on that floor, but you’ll need to arrange the cabling, power and management. An access point such as the Ubiquiti UniFi U7 Pro does not replace the router.

Test the connection at the intended workstation, then decide whether you need to run cables, add Wi-Fi points or simply move the router. The Dutch Authority for Digital Infrastructure highlights range as something to consider; actual coverage also depends on your surroundings.

What to consider What to look for Who is this most important to?
Coverage in the attic Test the connection at your workstation and see whether you can run an Ethernet cable upstairs. If I do design work upstairs, I want to know whether the connection is usable right there. Around 36% of consumers put attic coverage first.
Simultaneous network use Count the wired connections you need and check the port speeds on the exact version. When several studio devices are online at once, I look at the connections my equipment can actually use. Around 29% of consumers prioritise studio traffic with multiple devices online.
Management and access Check for updates, guest access and the terms of any paid features. If visitors and studio devices share the same network, I want to know who manages it and what access is available. Network management comes first for around 21% of consumers.
Installation and components Check the cable route, what’s included in the box and whether a PoE power supply is needed. If I want to keep installation work to a minimum, I factor in cables and extra power equipment before choosing a solution. Around 14% of consumers start by considering ease of installation and the components required.

What to watch out for when buying

  • Assuming the advertised coverage guarantees a connection in the attic

    Actual coverage and throughput can vary depending on building materials, obstacles and connected devices.

    Check the connection at your workstation and see whether it’s practical to run a cable upstairs.

    You may still need to add a node or run a cable later.

  • Buying an access point as a complete replacement for your router

    The Ubiquiti UniFi U7 Pro is an access point with an Ethernet uplink and PoE power, not a standalone internet router.

    Check which router you’ll keep and whether you have the required cable and PoE power supply.

    The installation may also require a compatible PoE power supply, cabling and network management.

  • Assuming the Wi-Fi speed on the box is what every designer will get

    The advertised wireless speed doesn’t automatically reflect the throughput to a single device; your network and connected equipment also matter.

    Compare the ports and the connection between nodes, and check the connection at the actual workstations.

Brands to consider

TP-Link

The Deco X50 is a mesh system. TP-Link describes optional Ethernet backhaul and three gigabit ports per unit for the standard X50.

  • A wired connection between compatible Deco nodes could be an option if you have a cable route.
  • Don’t confuse the Deco X50 with the X50-PoE: their power and ports differ. TP-Link notes that coverage and throughput depend on your surroundings.

ASUS

According to ASUS, the ZenWiFi BT8 is a two-unit Wi-Fi 7 mesh system with tri-band and 2.5-gigabit ports.

  • The manufacturer lists two 2.5-gigabit ports.
  • The combined advertised speed isn’t a measured speed for a particular studio or attic.

Ubiquiti

The UniFi U7 Pro is a wired Wi-Fi 7 access point designed to work alongside an existing router and a suitable network connection.

  • Ubiquiti specifies a 2.5-gigabit network connection and PoE power.
  • You’ll need to account for the router, cable, power supply and network management when setting it up.

NETGEAR

Orbi offers mesh connectivity between a router and satellites. NETGEAR describes wireless and wired connections for supported systems.

  • An Ethernet connection between points could be an option with supported Orbi systems.
  • Compatibility and port speeds vary by model, so check the exact set.

Products at Joybuy

This selection includes mesh systems for Wi-Fi in several places and a wired access point to extend an existing router. Before buying, check that the exact version meets the applicable EU and UK requirements for radio equipment.

ASUS ZenWiFi BT8, two-unit tri-band Wi-Fi 7 mesh system

ASUS ZenWiFi BT8 (2-pack) Tri-band Wi-Fi 7

A mesh option for anyone who needs Wi-Fi in several places and wants to consider the bands and ports supported by their connected devices.

The product description lists 2.4, 5 and 6 GHz bands, as well as 1GbE and 2.5GbE ports.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4 Dual-band Wi-Fi 7

A mesh option to consider if you need several Wi-Fi points and want to explore a wired connection between units.

The product description lists Wi-Fi 7, wired backhaul, a guest network and two 2.5GbE ports per unit.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653 Wireless Access Point

An access point to consider if you’re keeping your existing router and want to explore extending Wi-Fi via a wired connection.

The product description lists Wi-Fi 6, PoE, one gigabit Ethernet port, WPA3 and VLAN mapping. Check whether a compatible PoE power supply is included in the installation.

View at Joybuy
TP-Link Deco X50-PoE mesh system with three units

TP-Link Deco X50-PoE (3-pack) Wi-Fi 6

A mesh system for Wi-Fi in several places, with PoE support for a setup that takes power and cabling into account.

The product description lists three units and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 two-unit dual-band Wi-Fi 6 mesh system

TP-Link Deco X50 (2-pack) Dual-band Wi-Fi 6

A mesh option for Wi-Fi in both the studio and the attic, with Ethernet backhaul if you can run a cable between the units.

The product description lists three gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy

Frequently asked questions

Do I need to replace my provider’s router to get Wi-Fi in the attic?

No, not necessarily. First check the router’s position and the signal range. If you can run a network cable to the attic, you could consider a compatible access point or a mesh node connected to your existing router. The Netherlands Authority for Consumers and Markets (ACM) explains that you can choose your own router in the Netherlands, subject to the applicable requirements.

How do I connect Deco nodes using Ethernet backhaul?

TP-Link recommends setting up the Deco units on the same network first, then connecting the Ethernet cables. The correct wiring differs between router mode and access point mode, so check the instructions for your chosen configuration before connecting a switch.

Who manages updates for a personal router in a shared studio?

Choose someone to keep track of updates. Stay Safe Online recommends enabling automatic updates where possible; otherwise, check regularly for available updates.

Does advertised Wi-Fi coverage guarantee a connection in the attic?

No, advertised coverage doesn’t guarantee a connection at a particular workstation. Actual coverage and throughput depend on factors such as distance, building materials, obstacles and connected devices, so check the connection in the attic itself.

What should I look for in the EU version of a router or access point?

Check that the exact version meets the applicable EU requirements for radio equipment. The European Commission sets out the regulatory framework for radio equipment; a product description alone doesn’t confirm that a specific item for sale meets those requirements.