Watching in the attic without a network cable
You want to watch a recording in the attic, but can't run an ethernet cable there. The position of an extra Wi-Fi node and the signal between floors will determine which solutions are worth considering.
You don't automatically need a new router: first test the connection in the attic using the device you watch on. If the main issue is poor coverage between floors, choose a wired access point or wired backhaul if an ethernet cable is available. Without a cable, mesh could be a good fit, provided the extra node is placed somewhere with a strong enough signal. The number of nodes you need and the available connections depend on your home and existing router, not just the advertised Wi-Fi speed.
You want to watch a recording in the attic, but can't run an ethernet cable there. The position of an extra Wi-Fi node and the signal between floors will determine which solutions are worth considering.
You can run a cable to the attic and want to keep your existing router, with Wi-Fi or a wired connection closer to the screen.
You haven't yet worked out what's causing the interruptions and want to check the connection and video quality you need before buying network equipment.
This is a good fit if: you're not yet sure whether the interruptions are caused by Wi-Fi, the viewing device or your internet connection.
The trade-off: you avoid an unnecessary purchase, but testing won't fix a confirmed coverage problem on its own.
This is a good fit if: an ethernet cable can reach the attic or a nearby spot, and you want to keep your existing router.
The trade-off: running a cable and checking available ports or power may mean extra work.
This is a good fit if: several areas need coverage, running cables isn't practical and you can place an extra node somewhere with a good signal.
The trade-off: the connection between nodes and where you place them still matter. A node in the spot with the weakest signal won't guarantee an improvement.
This is a good fit if: you've established that your existing router is the main problem and a single, well-positioned Wi-Fi point can reach the attic.
The trade-off: check your provider's connection and settings. A new router won't automatically solve a weak signal travelling through several floors.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Wireless coverage | Check how many nodes the set includes, where you can place them and whether you can check that the connection between nodes is good. | I want to place an extra node somewhere with a strong enough signal of its own, as I don't have a cable to the attic. Around 36% of consumers prioritise wireless coverage in the attic. |
| Wired connection | Check whether a cable can reach the attic, whether the device supports access point mode or ethernet backhaul, and how many ports will remain available. | If I can run a cable to the attic, I want to use it for the connection or for the viewing device. Around 29% of consumers prioritise a wired connection in the attic. |
| Cause of interruptions | Test the connection where you'll be watching and check the resolution and requirements of the service providing the recording. | I want to find out first whether the interruptions are caused by Wi-Fi, the internet connection or playback. Around 21% of consumers want to identify the cause before buying. |
| Purchase and ongoing management | Compare the power supplies and cables you'll need, and check how updates work for the exact model. | I don't want to buy features or pay for an installation I don't need just to watch one recording. Around 14% of consumers prioritise the purchase and ongoing management. |
TP-Link warns that stated radio speeds and coverage aren't guaranteed, and that the actual connection depends on factors including the environment and placement. The Consumentenbond generally considers Wi-Fi 6 a more suitable starting point than Wi-Fi 7 for most people, but that doesn't tell you which set will work in your home.
Test the connection where you'll be watching and consider where you can place the nodes. Don't choose Wi-Fi 7 solely because the number on the box is higher.
A repeater extends an existing network, while a complete mesh set and a standalone router have different functions. A repeater isn't automatically a replacement for a router-and-mesh setup.
First work out which device manages your internet connection and how many extra nodes you actually need. Also check whether you want to keep your existing router.
TP-Link says the Deco X50-PoE supports IEEE 802.3at and IEEE 802.3bt for PoE power, but not IEEE 802.3af.
Check the requirements for the exact model and compare them with your PoE source. Otherwise, use only a power supply that's suitable for that model.
The hardware, software and support for the Deco X50-PoE can vary by version. The Consumentenbond describes a test of EU Ver 1.0, while TP-Link lists V2 on a product page.
Before buying, compare the full model name, set size and hardware version. Don't assume test information for one version applies to another.
The product ranges mentioned here suit different setups. Check the model and connections: a brand name alone won't tell you whether a device is right for your attic.
The Deco X50 range includes mesh sets with optional ethernet backhaul. TP-Link describes the X50-PoE as a PoE model designed for wall or ceiling mounting.
The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh series. You can compare its router or access point modes and wired connections.
The FRITZ!Repeater 3000 AX is a Wi-Fi 6 extender to consider if you want to keep your existing network.
These product options include wireless mesh sets, a wired access point and a standalone router. The right setup depends on the connection in your attic and the equipment you want to keep. For the model you choose, also check that it has the correct CE marking; the Dutch Authority for Digital Infrastructure lists this as a product requirement.
No image available
This mesh set is worth considering if you want extra Wi-Fi nodes and can place them somewhere with a strong enough signal.
The product name specifies a 2-pack.
No image available
This mesh set suits a wireless extension if you can place the nodes somewhere with a strong enough signal.
The product name specifies Wi-Fi 6, AX1800 and a 2-pack.
No image available
Consider this standalone router if you've established that your existing router is the main problem. One router won't automatically solve a weak signal travelling between floors.
The product name specifies dual-band (2.4 GHz / 5 GHz) and Gigabit Ethernet. AiMesh expansion requires a compatible ASUS device.
No image available
This access point is an option if you want to keep your existing router and can run a network cable to the installation spot.
The product name specifies Power over Ethernet (PoE); check in advance which power supply and cables you'll need for your setup.
No image available
This mesh set is worth considering if you want to add Wi-Fi nodes and can use a wired connection at one of them.
The product name specifies dual-band (2.4 GHz / 5 GHz), Wi-Fi 6 (802.11ax) and PoE. Check the power requirements for the exact hardware version.
It depends on the provider, the recording's resolution and its playback settings. Netflix recommends at least 3 Mbps for 720p, 5 Mbps for 1080p and 15 Mbps for 4K for its own streams. Don't assume these figures apply to another theatre service.
Don't automatically put it where reception is worst. The Consumentenbond recommends keeping obstacles between Wi-Fi nodes to a minimum. Check whether the extra node has a good connection at a potential halfway point.
Yes. In the Netherlands, you're free to choose your router, but your provider may have requirements for security and connection settings. ACM ConsuWijzer recommends checking the settings you need. An access point connected to your existing provider's router is a different setup from replacing the modem.
According to TP-Link, the Deco X50-PoE can carry power and data over a single ethernet cable. For PoE power, this model supports IEEE 802.3at or IEEE 802.3bt, but not IEEE 802.3af. Check the requirements for the exact model and the power supply available before choosing a setup.
Home Wi-Fi is licence-free when you use the designated frequencies and comply with the conditions of use, according to the Dutch Authority for Digital Infrastructure. Wi-Fi equipment sold in the Netherlands must meet the applicable product requirements and carry the correct CE marking. Check this for the model you buy.