Concert viewer with a weak attic signal
You mainly want to improve coverage at your usual viewing spot in the converted attic. A wireless repeater needs to be placed somewhere that still has a usable connection to the router.
Choose a wired access point if there’s a network cable to the attic, or one can be installed. This means the connection up there won’t depend on a wireless signal travelling through the floor. If there’s no cable, a repeater may be an option, provided it can still get a good signal from the router in an intermediate location. For coverage in several rooms, consider mesh, while powerline performance depends on your home’s electrical wiring. A quoted Wi-Fi speed doesn’t guarantee an uninterrupted stream.
You mainly want to improve coverage at your usual viewing spot in the converted attic. A wireless repeater needs to be placed somewhere that still has a usable connection to the router.
You can use a network cable and want to avoid relying on a wireless connection between floors. An access point, or a device with access point mode, could be a suitable option.
You need coverage not just in the attic, but in other rooms too. Compare mesh setups and check how they work with your current router.
For one viewing spot, your choice mainly depends on whether you can run a cable or find a suitable place for a repeater. If several rooms need coverage, mesh may be a better fit; powerline requires you to check your home’s electrical wiring.
Suitable if: you want to improve coverage in one weak spot and can find a place between the router and attic with a usable signal.
Keep in mind: floors and other obstacles still affect the wireless connection, so don’t automatically place the repeater in the dead zone itself.
Suitable if: there’s a network cable to the attic, or one can be installed.
Keep in mind: you’ll need a cable to the access point’s location. Also check that the device supports access point mode and has the right Ethernet port.
Suitable if: several rooms need coverage, not just the attic.
Keep in mind: wireless mesh points need a suitable connection of their own. OneMesh and FRITZ! Mesh don’t automatically work with every router.
Suitable if: running a cable to the attic isn’t practical and the wireless route through floors is challenging.
Keep in mind: performance depends in part on your home’s electrical wiring. Check the requirements and compatibility of the kit you choose.
| Consideration | What to look for | Who should pay particular attention? |
|---|---|---|
| Reliable connection | Check the connection between the router, extender and screen at the actual viewing spot. With a repeater, reception where you place the repeater matters too. | If you want to avoid interruptions while watching a live concert in the attic, consider the entire connection, not just the signal at the screen. Around 36% of consumers put a reliable attic connection first. |
| Coverage without running a new cable | Find an intermediate location where the repeater can still get a good signal from the router. Assess powerline based on your home’s electrical wiring and the requirements of the kit you choose. | For consumers who want attic coverage without running a new network cable, the key is finding a solution that works in their home. An estimated 29% give top priority to coverage without a new cable. |
| Router compatibility | Check your router model, the mesh features it supports and the operating mode of the device you choose. TP-Link pairs OneMesh with a compatible OneMesh router; FRITZ! describes its Mesh features as part of a compatible FRITZ! network. | If you want to keep using your existing router, you’ll want to know in advance which features work with it. Around 21% of consumers give compatibility with their current router top priority. |
| Equipment and power consumption | Compare how many network points you’ll need for the coverage you want, and check the stated power consumption of the specific device. | For consumers who want to factor in the number of devices and power consumption, the setup and its energy use are important considerations. Around 14% put these practical aspects first. |
A repeater can only extend the router’s signal if it can receive that signal well enough itself.
First, find a suitable intermediate location and check the connection there. Then test it at the spot where you plan to watch the concert. If there’s no usable wireless route, look into a wired solution.
If there’s no suitable intermediate location, you may need a cable to the attic or another networking solution.
The Wi-Fi standard or advertised speed alone doesn’t tell you what connection you’ll get in the attic. Distance, floors and the connection between network points all play a part.
Assess the connection at your viewing spot and consider the whole route from the router to the extender and screen.
Proprietary mesh features may require a particular router and network. A device that works as a standard repeater won’t necessarily offer the same mesh features.
Check your exact router model, mesh support and firmware before choosing a model.
Powerline performance depends in part on your home’s electrical wiring. Product ranges may also have different compatibility requirements; for example, devolo states that Magic adapters don’t support dLAN adapters.
Check the requirements for the specific kit and make sure it’s suitable for your home’s electrical installation.
The RE305 and RE605X are repeater models designed to work with an existing router. Choose between them based on the connection and network features you need.
The FRITZ!Repeater 1200 AX is an option if you’re looking for Wi-Fi 6 and a gigabit LAN connection, particularly when used with a compatible FRITZ!Box.
According to devolo, Magic 2 WiFi next combines powerline with Wi-Fi for situations where there’s no cable to the attic and the wireless route is challenging.
The EAX15 range is positioned as a mesh extender for use with existing Wi-Fi.
These products suit the options described: powerline with Wi-Fi, mesh, wireless repeaters and a wired access point.
No image available
This powerline Wi-Fi kit is an option if running a new network cable to the attic isn’t practical and you want to extend your connection through your home’s electrical wiring.
Powerline performance depends on your home’s electrical wiring; check that the kit you choose is suitable for your situation.
No image available
The three Deco units are designed to create a mesh setup for coverage in several rooms.
The product description says the system can be managed through the Deco app. Check that the setup suits your existing network and the rooms that need coverage.
No image available
This wireless repeater is designed to extend an existing Wi-Fi connection. Choose a location where it can still get a good signal from the router.
The product description lists 2.4 GHz, two external aerials and a quoted speed of up to 300 Mbps.
No image available
If you want to extend an existing Wi-Fi connection, place the repeater somewhere it can still receive a signal from the router.
The product information lists dual-band Wi-Fi, one 10/100/1000 Mbit/s Ethernet port and web management.
No image available
Access point mode is suitable for a wired connection to the attic; the product information also lists a repeater mode.
The description lists 2.4 GHz up to 300 Mbps, 10/100 Mbit/s Ethernet, two aerials and Passive PoE.
Place the repeater between the router and attic, somewhere it can still get a good connection from the router. Check the signal there, then test it at your viewing spot. If obstacles prevent a usable wireless connection, consider a wired access point.
No. Check compatibility with your exact model and router. For the RE models mentioned, TP-Link requires a compatible OneMesh router; FRITZ! describes its Mesh features when used with a compatible FRITZ! network.
Test the connection where you’ll be watching and check both the connection between the screen and the Wi-Fi point, and the connection from that point to the router. Also test with the other devices you plan to use at the same time during the concert.
Consider how many network points you’ll need, whether a cable to the attic is available and the quoted power consumption of the device you choose. Powerline performance depends in part on your home’s electrical wiring.
According to the Dutch Digital Infrastructure Inspectorate, home use of Wi-Fi on the designated frequencies is licence-exempt if you meet the conditions of use; there’s no notification or registration requirement for this licence-exempt use. The equipment must carry the mandatory CE marking.