Who is this guide for?

Student with weak Wi-Fi in the attic

If your study portal works elsewhere in the house but the connection is weak in the attic, you’ll want to know whether a well-placed repeater could help. The Consumentenbond recommends placing a booster where you want to improve the signal.

Resident who needs to cover several floors

If floors make it harder for the signal to reach between levels, you can compare mesh with powerline Wi-Fi. The Consumentenbond recommends placing Wi-Fi points with as few obstacles between them as possible; powerline uses a different connection between the units.

Student who can run Ethernet to the attic

If you can run a network cable to your study, you can compare a wired access point with wireless repeating. TP-Link lists an access point mode for the RE605X; check whether this feature is available on any device you’re considering.

What should you consider when choosing?

Standalone repeater

Best for: when Wi-Fi is weak mainly in one room and there’s still a spot between the router and the attic with a usable signal.

Bear in mind: the repeater still relies on a wireless connection to the router.

Wired access point

Best for: when you can run Ethernet to the attic and want a wired connection to the Wi-Fi point.

Bear in mind: you’ll need to run a cable and check that your chosen device has an access point mode.

Mesh with multiple Wi-Fi points

Best for: when you need Wi-Fi in several rooms or on multiple floors, and the points can reach one another from suitable locations.

Bear in mind: you’ll need several points, and it’s still important to place them with as few obstacles between them as possible, according to the Consumentenbond.

Powerline Wi-Fi

Best for: when a wireless connection between floors isn’t good enough, you’d rather not run cables and your electrical wiring supports the connection.

Bear in mind: powerline works via compatible adapters or units; TP-Link recommends plugging Powerline Deco directly into a wall socket.

What to consider What to look for when buying Who is this most relevant to?
Coverage in one attic room Test the portal elsewhere in the house and check whether there’s still a signal at a possible intermediate location. If the portal works elsewhere but not in the attic, I want to know whether a repeater between the router and the room can still receive a signal. Around 40% of consumers prioritise coverage in that one room.
Stable portal session Compare the connection in the attic with the one near the router; check whether the problem occurs there too. When I need a stable session while studying, I first want to know whether the cause is the Wi-Fi in the attic. Around 30% of consumers prioritise staying connected while using the portal.
Connection between floors Check whether the Wi-Fi points can reach one another; if necessary, compare a cable with a suitable powerline kit. If floors interfere with the wireless connection between points, I’m looking for a route to the attic that works in my home. Around 20% of consumers prioritise a connection between floors.
Installation and number of units needed Check how many devices are included in the kit, which connections are needed and whether they’re compatible with your existing network. If you want to keep the number of devices and the installation work to a minimum, first check which solution suits your home. Around 10% of consumers consider this their main priority.

Common mistakes

  • Putting the repeater where the Wi-Fi already drops out

    The connection between the router and the repeater needs to be usable too. So a device in the attic won’t automatically help if it can barely receive a signal there itself.

    First find an intermediate spot with a signal, then test the connection in the attic.

  • Assuming all mesh and powerline products work together

    Compatibility can depend on the exact product range and connection method. For example, TP-Link states that the Deco PX50 doesn’t provide powerline backhaul with the Deco PX10, P7 or P9, or with standalone powerline adapters.

    Check the exact models and supported connection method before combining units.

  • Assuming the stated link speed is the speed you’ll get on your study portal

    A stated Wi-Fi or powerline link speed doesn’t, by itself, tell you what connection you’ll get in the attic room.

    Use the specifications to compare features, then test the connection where you study.

Brands to consider

TP-Link

The range includes standalone repeaters and mesh products with powerline backhaul. The features and conditions listed apply to the models mentioned, not automatically to every product from the brand.

  • TP-Link lists a signal indicator, gigabit port and access point mode for the RE605X.
  • OneMesh requires a compatible OneMesh router. The Deco PX50 uses G.hn powerline and doesn’t provide powerline backhaul with the Deco PX10, P7 or P9, or with standalone powerline adapters.

devolo

Magic powerline products offer a way to get Wi-Fi to another floor without running Ethernet upstairs.

  • According to devolo, the Magic 2 WiFi 6 next Starter Kit contains two adapters; the Wi-Fi adapter has two gigabit ports.
  • How well it works in a particular home depends on the electrical wiring, so you’ll need to assess it at the location where you want to use it.

KPN

SuperWifi points are a provider-specific option for people who use KPN home internet and the MijnKPN app.

  • KPN offers a Wi-Fi scan and help with positioning the points through MijnKPN.
  • Check compatibility if you use a router from another provider; support within KPN doesn’t prove it will work in the same way with another provider.

Joybuy products for Wi-Fi in the attic

This selection includes mesh kits, access points and powerline Wi-Fi for use in several rooms or an attic room. For radio equipment sold in the Netherlands, check the applicable requirements and documentation for the version on offer; the Dutch Authority for Digital Infrastructure states that CE marking is required.

TP-Link Deco E4 3-pack dual-band Wi-Fi 5 mesh kit

TP-Link Deco E4 (3-pack)

A mesh kit with three stations for spreading Wi-Fi across several rooms.

Dual-band Wi-Fi 5 (2,4 GHz/5 GHz); two Ethernet ports per station. The product description mentions setup support through the Deco app.

View at Joybuy
Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

An access point for a wired setup if you have Ethernet available in the attic.

The product description lists Wi-Fi 7, a 2,5-Gigabit Ethernet uplink and wall or ceiling mounting. Requires PoE+ (802.3at) and management through the UniFi Network platform.

View at Joybuy
TP-Link TL-WPA7517 KIT powerline Wi-Fi starter kit

TP-Link TL-WPA7517 KIT

A powerline Wi-Fi starter kit for getting Wi-Fi to another floor without running Ethernet there.

The product description lists IEEE 1901, a Type E plug and LED indicators for PLC, Wi-Fi, LAN and power. Performance depends on the electrical wiring.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6 mesh kit

TP-Link Deco X50 (3-pack)

A mesh kit with three stations for extending Wi-Fi to several areas of your home.

Dual-band Wi-Fi 6; three Gigabit Ethernet ports per station.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

An access point for a wired setup if you can run Ethernet to the attic; the product information also lists a range extender mode.

Operates on 2,4 GHz and lists up to 300 Mbit/s, a 10/100-Mbit/s Ethernet port and passive PoE. The stated maximum data rate isn’t a measure of your portal session speed.

View at Joybuy

Frequently asked questions

Where should I put a wireless booster for the attic?

Place it somewhere it can still receive a good signal from your existing network, with as few obstacles as possible between the Wi-Fi points. The Consumentenbond recommends placing the points no more than two rooms apart if possible; check the signal in your own home.

Does Deco PX50 work with my existing powerline adapters?

Not as part of a shared powerline backhaul with standalone TP-Link powerline adapters. TP-Link also says the PX50 doesn’t form a connection with the Deco PX10, P7 or P9 for this purpose, so check the exact models and connection method.

What if my new Wi-Fi setup doesn’t help with the study portal?

First check whether the problem also occurs close to the router. For an online purchase in the Netherlands, you’ll generally have a statutory cooling-off period of up to 14 days after delivery; check the terms and any exceptions with ACM ConsuWijzer. If a product is faulty under normal use, the seller must put it right, according to ACM ConsuWijzer.

What Dutch requirements apply to a Wi-Fi booster?

Radio equipment placed on the market in the Netherlands must meet the applicable requirements of the Radio Equipment Directive and carry a CE mark, according to the Dutch Authority for Digital Infrastructure. Since 1 August 2025, applicable RED 3.3 cybersecurity requirements have also applied to certain products, including internet-connected radio equipment; check the documentation for the version on offer.