Who is this buying guide for?

Working from home in an attic room

You want a usable connection at your desk for work and video calls. Test it there and check whether you can run a network cable upstairs. The Consumentenbond points out that walls and ceilings can interfere with the signal.

Living without a network cable upstairs

You want Wi-Fi across multiple floors without installing new Ethernet cabling. Wireless mesh is an option if you can position the points so they can still communicate with each other; the Consumentenbond stresses how important this connection between points is.

Struggling to get a signal through the floors

You’re looking into another way to connect mesh points because wireless signals are obstructed along the way. TP-Link lists powerline over your home’s electrical wiring as an option for compatible models. Whether it’s suitable depends on your electrical installation and model compatibility.

What should you look for when buying?

Walls and ceilings can weaken the Wi-Fi signal. The Consumentenbond recommends positioning mesh points so they can communicate well with each other, so test the connection at your attic desk.

What to consider What should you check? Who is this important for?
Coverage in the attic Test the signal where you work and find a spot for an intermediate point where it can still connect to the previous point. I want to be able to work in the attic even though the router is downstairs. Around 33% of consumers prioritise coverage in the attic.
Reliability while working Test the internet connection using a cable and check whether your chosen system offers Ethernet backhaul or an Ethernet connection at the attic point. If I make video calls or send files from the attic, I want a dependable connection. Around 27% of consumers prioritise reliability for work.
Installation without new cabling Check that wireless intermediate points can reach each other. For powerline, check your electrical installation and model compatibility. I don’t want to run a new network cable upstairs and need a solution that’s practical for my home. Around 20% of consumers prioritise installation without new cabling.
Overall setup Check how many points are included, which ports are available and whether the system works with your existing modem or router. I want to know how many devices I’ll need and whether they’ll connect to my existing network. Around 20% of consumers focus mainly on the overall setup and connections.

Common mistakes

  • Assuming the stated coverage area guarantees a signal in the attic

    Actual coverage depends on factors such as building materials, obstacles and where the devices are positioned.

    Test the connection where you work in the attic and check how well the points connect before deciding whether the set is right for you.

  • Assuming all Deco powerline points work together

    According to TP-Link, the Deco PX50 cannot provide powerline backhaul with the Deco PX10, P7 or P9.

    Check the full model names and electrical connection requirements before combining points.

  • Buying a new router before testing your existing connection

    A wired test can help you work out whether the problem is with your internet connection or the Wi-Fi route to the attic.

    First, connect a computer using a network cable and test the connection. If necessary, try placing your existing router somewhere else suitable.

Brands to consider

TP-Link

TP-Link offers expandable Deco mesh systems, among other products. According to TP-Link, the X50 can use optional Ethernet backhaul, while the PX50 uses G.hn powerline over your home’s electrical wiring.

  • The PX50 could be worth considering if a wireless connection between floors is difficult and your electrical installation and the points you use are compatible.
  • The X50 and PX50 are different models. A stated feature or Wi-Fi speed doesn’t in itself tell you how much coverage you’ll get through your floors.

FRITZ!

FRITZ! describes the Mesh Set 1700 as expandable and suitable for connecting to an existing router or modem.

  • According to FRITZ!, each repeater has a gigabit LAN port and supports automatic updates.
  • When considering a set, check how many points it includes and how they connect to your existing network. Product specifications aren’t an independent performance test.

ASUS

ASUS’s ZenWiFi BD4 is a Wi-Fi 7 mesh system with an access point mode. According to ASUS, wired backhaul is supported.

  • ASUS lists two 2.5Gbit/s ports for this model.
  • Wi-Fi 7 alone doesn’t guarantee better coverage through floors. Check the exact model and connection options.

KPN

KPN offers SuperWifi points to extend an existing KPN home network, with installation help available through MijnKPN.

  • According to KPN, points are available to buy or rent.
  • Options and terms depend on your provider’s setup. This isn’t a comparison of performance with independently purchased mesh sets.

Joybuy products for Wi-Fi in the attic

This selection features mesh sets for extending Wi-Fi across multiple floors, including wireless mesh options and models with Ethernet backhaul.

TP-Link Deco E4 mesh set with three units

TP-Link Deco E4 (3-pack), Wi-Fi 5

An option for extending your wireless mesh if you can place an intermediate point where it can still connect to the previous point.

The set includes three units and supports 2.4 and 5 GHz Wi-Fi. The product description lists two network ports per device.

View at Joybuy
ASUS ZenWiFi BD4 mesh Wi-Fi system

ASUS ZenWiFi BD4, Wi-Fi 7

An option to consider if you want to use a mesh setup with wired backhaul and can run the necessary cabling at home.

The product information lists Wi-Fi 7, dual-band Wi-Fi and support for wired backhaul.

View at Joybuy
TP-Link Deco X20 mesh set with two units

TP-Link Deco X20 AX1800 (2-pack)

An option if you want to extend your mesh and can use Ethernet backhaul where network cabling is available.

The set includes two Deco X20 units and supports Wi-Fi 6. The product description lists both wireless and wired connections between the units.

View at Joybuy
TP-Link Deco X50 mesh set with three units

TP-Link Deco X50 (3-pack), Wi-Fi 6

An option if you’re looking for a set with three mesh points and can make use of Ethernet backhaul where cabling is available.

The set includes three units. The product description lists Wi-Fi 6, gigabit ports and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro mesh set with three units

TP-Link Deco XE75 Pro (3-pack), Wi-Fi 6E

An option if you’re looking for a mesh set with three units to extend coverage across multiple floors. Check where the points can reach each other in your home.

The product information lists tri-band Wi-Fi on 2.4, 5 and 6 GHz.

View at Joybuy

Frequently asked questions

Should I upgrade to a faster internet connection first?

Not before testing your connection. Use a computer connected by network cable and compare the result with the speed promised by your provider. If the wired connection is good but the Wi-Fi in your attic is disappointing, look into the wireless route and where the points are positioned.

Where should I place a wireless mesh point?

Don’t place the point only where the signal is almost non-existent. Position the points with as few obstacles between them as possible, and use the placement guide or status indicator to check that they stay connected to each other.

Will a Deco PX50 work with other Deco powerline points?

Not with every model. According to TP-Link, the PX50 cannot provide powerline backhaul with the PX10, P7 or P9. Check model compatibility and electrical connection requirements. TP-Link recommends plugging powerline devices directly into a wall socket.

What should I look for in mesh points besides coverage?

Check how many points you need, which connections are available and whether the system works with your existing modem or router. Mesh points are usually switched on all the time, so include energy consumption in your comparison too.

Who should I contact about a fault, and how long does the statutory guarantee last?

Report a fault to the seller. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands. You can expect a product to meet what you could reasonably expect from it. Any manufacturer’s guarantee is separate from this.