Student with an attic study
You want to know whether your study will get a usable connection. Start by measuring, then assess the route to the attic, as recommended by the Consumers’ Association.
First, check whether the problem only affects the attic or also occurs near the router. An extra Wi-Fi point won’t fix a problem with your internet connection by itself. If you have an Ethernet cable, you can compare wired mesh with an access point. Without a cable, wireless mesh is an option if the points can maintain a reliable connection with each other. Decide how many points you need based on where they can be placed, and if your network gets busy in the evenings, check the connections, security settings and running costs too.
You want to know whether your study will get a usable connection. Start by measuring, then assess the route to the attic, as recommended by the Consumers’ Association.
You study while others are online at the same time. Assess the coverage and test the connection when the network is busiest. The Consumers’ Association includes speed and performance in different locations among its test criteria.
You can run a cable to the attic or an intermediate floor and want to weigh up whether an access point or wired mesh would provide the coverage you need.
Choose this if: you can’t run a cable between floors, but can place an intermediate point where it can maintain a reliable wireless connection.
Bear in mind: the connection between the points will still depend on their placement and wireless conditions.
Choose this if: you already have a suitable Ethernet cable and want to use several Wi-Fi points that work together.
Bear in mind: you’ll need a cable and suitable ports. Check that the exact kit supports Ethernet backhaul.
Choose this if: you mainly need better coverage in the attic and can connect an Ethernet cable there.
Bear in mind: you’ll need a cable. Centralised management and roaming depend on the equipment you choose.
Choose this if: your measurements point to a poor router location, a congested channel or a settings issue.
Bear in mind: an adjustment could save you from buying new equipment, but may not be enough if distance and floors are weakening the signal.
| Factor to consider | What should you check? | Who is this important to? |
|---|---|---|
| Coverage in the attic | Measure in the attic and at possible intermediate locations; check the number of points and the wireless connection between them. | I want to know whether I can get a connection in my study before choosing extra points; around 36% of consumers prioritise attic coverage. |
| Evening use | Test at the busiest time and compare the connection near the router with the one in the attic; check the Wi-Fi versions supported by your devices. | If others are online at the same time, I want to know how my connection performs; around 29% of consumers give evening use top priority. |
| Studying and video calls | Check that Ethernet backhaul works with the exact kit and see how many ports will be left free; compare this with a wired access point. | I want a reliable connection for study or work and need to see whether running a cable is possible; around 21% of consumers put this need first. |
| Installation and use | Check how many points you need, the available settings, security settings, updates and power consumption. | I want installation and ongoing use to be easy to manage; around 14% of consumers give this top priority. |
The extra point also needs a reliable connection to the network to relay wireless mesh.
Test a possible location on the intermediate floor. If there’s no reliable wireless connection there, see whether running a cable is an option.
A Wi-Fi version number or advertised speed doesn’t tell you on its own how the connection will perform in your home. The Consumers’ Association tests Wi-Fi boosters on factors including speed and performance in different locations.
Measure at the place and time you study, then compare the result with the connection near the router.
A mesh kit won’t necessarily help if the problem is mainly with your internet connection or a setting on your existing router. According to the Consumers’ Association, you don’t always need a new router or access point to improve Wi-Fi.
Compare the connection near the router with the one in the attic, and check the router’s position and channel congestion before choosing a solution.
You don’t automatically need more points for a single study. The connection route and the position of each point matter too.
First decide where the points can go and how they’ll connect to each other. Then check which connections that set-up requires.
The Deco range includes mesh kits with Wi-Fi 6 and Wi-Fi 7. For this situation, the number of points and the connection between floors are particularly relevant.
The Mesh Set 4200 is a Wi-Fi 6 kit with three points. FRITZ! says it works with a FRITZ!Box or directly with a fibre modem/ONT.
According to ASUS, the ZenWiFi BT10 is a tri-band Wi-Fi 7 system with access point mode and 10G ports.
The Orbi RBK853 is a Wi-Fi 6 mesh kit with three points, as described by the Consumers’ Association.
These mesh kits are designed for anyone looking to extend Wi-Fi across several rooms or floors. Check the layout and connections your home requires.
No image available
An option if you want to use mesh across several rooms and can run a wired connection between the units.
The product information lists tri-band Wi-Fi 7, MLO, mesh roaming, and wired or wireless backhaul. Ports are listed at 10, 2.5 and 1 Gbps.
Wired backhaul requires a usable Ethernet cable between the mesh points.
No image available
A mesh kit with two units for anyone looking to extend their network to several areas.
The product name and description list tri-band Wi-Fi 7 and AiMesh.
No image available
An option if you want to extend a mesh connection across several rooms and can use a cable between the units.
The product information lists Wi-Fi 6, two Deco units and Ethernet backhaul.
Ethernet backhaul requires a usable Ethernet cable between the units.
No image available
A kit with three mesh stations that work together, for anyone looking to use Wi-Fi in several areas of the home.
The product information lists dual-band Wi-Fi 5, Ethernet ports and roaming between the stations.
No image available
A kit with three mesh points for anyone looking to extend Wi-Fi across several floors.
The product information lists Wi-Fi 6 and three gigabit ports per unit.
First, measure the signal in the attic and where you might place an intermediate point. The Consumers’ Association suggests two points as a starting point for two floors and three for three floors. The best set-up for your home will depend on the actual layout and coverage.
In the Netherlands, you can generally choose your own equipment, but it must meet the same security and network requirements, according to ACM ConsuWijzer. Check the settings available on your provider’s router and on the mesh kit before choosing router or access point mode.
Test the connection again in the attic and during a busy evening. Set a strong Wi-Fi password, check the security settings and keep the equipment up to date. The settings available vary by model.
When choosing, consider the complete set-up, including any extra points, cable installation and power consumption. In addition to any manufacturer’s or seller’s warranty, statutory warranty rights apply in the Netherlands: with normal use, the product must meet what you could reasonably expect of it. According to ACM ConsuWijzer, not every product has a fixed statutory warranty period of two years.
According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi if you follow the rules for the designated frequencies and their use. Licence-exempt use of frequencies doesn’t require notification or registration; this doesn’t mean that every device or setting automatically meets those requirements.