Who is this advice for?

Viewer with weak Wi-Fi in the attic

If the theatre recording keeps buffering mainly in your converted attic, you’ll want to know where an extra Wi-Fi node can still get a usable connection to the rest of your network. The Consumentenbond points out that the positioning of Wi-Fi nodes matters.

Viewer with a cable to the attic

If you have an existing network cable running upstairs, or can install one, you can compare a direct connection, an access point or wired mesh to see what suits your viewing spot. TP-Link and ASUS describe ethernet backhaul for certain mesh models.

Household sharing a network

If other people use the network while you’re watching, the available connections and how the system works with your existing modem are important. The Consumentenbond and TP-Link describe points to consider around positioning, connections and mesh configuration.

What should you look for when buying?

Wireless mesh

Suitable when: the connection by the router is good, Wi-Fi is weak in the attic and you can place an extra node somewhere it still gets reception.

Bear in mind: positioning and the wireless connection between nodes remain key; mesh won’t fix a poor internet connection.

Mesh with ethernet backhaul

Suitable when: there’s a suitable cable route to the attic and you want to keep Wi-Fi available there for multiple devices.

Bear in mind: installing cables takes work and requires connections; check that the model you choose supports the wired setup you want.

Wired access point or direct cable

Suitable when: there’s already a cable to the attic and you mainly want to connect a single fixed viewing spot or add Wi-Fi there.

Bear in mind: an access point needs configuring and power; decide in advance whether your existing router will continue to manage the network.

Wi-Fi equipment sold in the Netherlands must meet the applicable European requirements and carry the correct CE marking. The Rijksinspectie Digitale Infrastructuur advises checking the marking on the specific model.

Concern What to look for when buying Who is this more important to?
Coverage where you watch Compare the connection by the player with the one by the router, and find a spot for the extra node before the signal becomes weak. If the recording mainly buffers in the attic, I want to know whether a node placed between the router and attic can extend the connection. Around 40% of consumers prioritise reliable coverage where they watch.
Connection between floors Check whether there’s a cable route and whether the exact model supports ethernet backhaul. If I have a cable route upstairs, I want to make use of it rather than rely solely on a wireless connection between floors. Around 30% of consumers give the connection between floors top priority.
Connections for shared use Count the free ethernet ports once you’ve connected the modem, player and any backhaul; also check the Wi-Fi standard supported by your devices. When other people use the network too, I want to know which connections will still be available for the player and other devices. Around 20% of consumers prioritise connections and use by multiple devices.
Settings and setup Check the features available in the selected operating mode, the cables you’ll need and the CE marking on the specific model. For one fixed viewing spot, I don’t want more equipment or management than necessary; I also want to know which router features will remain available. Around 10% of consumers give cost and ease of management top priority.

Common buying mistakes

  • Placing an extra node somewhere with no usable signal

    With wireless mesh, the extra node also needs to maintain a connection to the network.

    First, choose an intermediate spot with usable reception, then check the connection by the player.

  • Assuming the combined Wi-Fi speed is the speed you’ll get in the attic

    An advertised speed figure alone doesn’t tell you how reliably the recording will play where you watch. The connection between nodes and your internet connection also matter.

    Compare the positioning, backhaul and connections before choosing based on a speed figure.

  • Counting an ethernet port twice

    A port needed for the modem or a wired backhaul won’t also be free for the TV or media player.

    Map out the connections and count how many free ports each node will have after installation.

    If there aren’t enough connections, you may need an extra switch or a different setup.

  • Assuming all router features remain available in access point mode

    According to TP-Link, features including parental controls, port forwarding and address reservation aren’t available in the Deco app when using access point mode.

    Before buying, check which router will manage the network and which settings you need.

Brands to consider

Features vary by product range and model, so compare the exact version and how it connects to your existing router.

TP-Link

The Deco X50 is worth considering when comparing wireless placement with a setup using optional ethernet backhaul.

  • TP-Link lists three gigabit ports per Deco X50 node and optional ethernet backhaul.
  • The stated coverage is a manufacturer claim, not a guarantee for a converted attic. Some router features aren’t available in the Deco app when using access point mode.

ASUS

The ZenWiFi XD5 is an option to compare if there’s a cable route between nodes and network name settings matter to you.

  • ASUS describes ethernet backhaul and the option to set network names jointly or separately for each frequency band.
  • Check the exact model: the features described aren’t specifically linked to a version sold in the Netherlands.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend an existing FRITZ!Box network.

  • FRITZ! lists three radio bands and two gigabit LAN connections; it can also be connected via LAN.
  • The FRITZ! mesh functionality described works with a FRITZ!Box. Don’t assume it will work in the same way with a router from another brand without checking first.

NETGEAR

The Orbi RBK763S is a router-and-two-satellite set to compare if you’re looking for a dedicated connection between the router and satellites.

  • NETGEAR specifies tri-band Wi-Fi and a dedicated connection between the router and satellites.
  • Claims about range and uninterrupted streaming come from the manufacturer and aren’t a guarantee for a converted attic; check the regional version too.

Joybuy products

This selection includes mesh systems for Wi-Fi across multiple rooms, with models for wireless mesh and versions described as supporting ethernet backhaul.

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A mesh set with three nodes for use in multiple locations.

  • Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).
  • Three gigabit ports per node and optional ethernet backhaul are listed.
Joybuy
Linksys Velop Pro 7, tri-band mesh with two nodes

Linksys Velop Pro 7, tri-band mesh with two nodes

The product description lists two mesh nodes included for a setup with multiple Wi-Fi points.

  • Wi-Fi 7 (802.11be).
  • Frequency bands: 2.4 GHz, 5 GHz and 6 GHz.
Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A mesh pack with three nodes for use in multiple locations.

  • Tri-band Wi-Fi 6E (802.11ax); 2.4 GHz, 5 GHz and 6 GHz.
  • Three gigabit ports per node are listed.
Joybuy
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

The three mesh nodes offer multiple placement options; PoE support is listed for this version.

  • Dual-band Wi-Fi 6 (802.11ax); 2.4 GHz and 5 GHz.
  • Two ethernet ports per node are listed.
Joybuy
TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

A mesh pack with two nodes; optional ethernet backhaul is listed for this version.

  • Dual-band Wi-Fi 6 (802.11ax); 2.4 GHz and 5 GHz.
  • Three gigabit ports per node are listed.
Joybuy

Frequently asked questions

Should I test my internet connection or Wi-Fi first?

Test the connection by the playback device and compare it with the connection closer to the router. If it buffers there too, check your internet connection, streaming service or player first. For its own service, Netflix recommends a stable connection of 15 Mbps or more for 4K, for example; that isn’t automatically the required speed for your theatre recording.

Can I use mesh while keeping my provider’s router active?

You can with Deco using access point mode, where your existing router manages the network and ethernet backhaul remains possible. TP-Link states that features including parental controls, port forwarding and address reservation aren’t available in the Deco app in this mode. Check that it suits the set you’re considering and the settings you want.

Where should I put an extra Wi-Fi node?

Place the node somewhere it can still get a usable connection to the network, then check the reception where you watch. The Consumentenbond highlights how important positioning is; a manufacturer’s range claim won’t necessarily reflect coverage in a home with a converted attic.

What running costs and warranty rights should I consider?

Wi-Fi nodes use electricity while switched on, so the number of devices and the setup you want are relevant. In the Netherlands, your statutory guarantee depends on what you could reasonably expect from the product. If a product is faulty, the seller must offer a solution, according to ACM ConsuWijzer. A manufacturer’s warranty doesn’t replace those rights.

What should I check on the CE marking of a mesh Wi-Fi node?

Check that the specific model carries the correct CE marking. Wi-Fi equipment sold in the Netherlands must meet the applicable European requirements. The Rijksinspectie Digitale Infrastructuur advises you not to use the device if the marking is missing or incorrect, and to contact the seller.