Who is this choice relevant to?

Solo archival listener

Primarily assesses existing audio files and wants to switch easily between headphones and active monitors, without needing a second listening mix. Focusrite and MOTU specifications describe models with one headphone output.

Two people at the listening desk

Wants to listen alongside a colleague and needs to decide whether two individual volume levels are enough, or whether different signals are required. Solid State Logic and Audient describe models with two headphone sockets; check which signals each model can receive.

Restoration specialist with multiple signal paths

Compares versions through separate outputs or transfers analogue sources as well as assessing recordings. In that case, available routing and suitable line inputs matter; Audient describes the iD14 MKII as having four line outputs and a configurable headphone route.

What should you look for when choosing?

First decide whether one person or several people will be listening at the same time. Then check whether everyone needs the same signal and whether the workstation will also be used to transfer analogue media.

What to consider What to look for Who is it for?
Two listeners Check the number of headphone outputs and whether they can receive the same or separate signals. The Solid State Logic manual explains how DAW outputs 3–4 can be assigned to headphone B on the SSL 2+ MKII. If I’m listening alongside a colleague, I want to know whether we’ll hear the same material or whether each of us can have a separate signal. Around 33% of consumers say simultaneous listening is their main requirement.
Simple playback Check that there’s a headphone output and suitable connections for your monitors. Focusrite and MOTU specifications describe separate volume controls for headphones and monitors; on the Scarlett 2i2 4th Gen, those outputs share the same audio signal. If I’m mainly assessing existing files on my own, I want to adjust the listening volume easily without choosing features I don’t need. Around 25% of consumers prioritise simple solo monitoring.
Different listening routes Find out which physical outputs can be controlled independently and how your playback software assigns them. Audient describes a configurable cue route for the iD14 MKII; its manual warns that DAW Thru bypasses the volume control on that output. When comparing restored versions, I want to listen to signals through different routes and check the settings. Around 25% of consumers cite flexible listening routes as their main consideration.
Transferring analogue media Check that the interface has suitable stereo line inputs and that the source and levels are compatible with your chosen set-up. IASA recommends a minimum of 48 kHz and at least 24 bit for new digital copies of analogue material; this isn’t a requirement for playing back existing files. If I’m digitising analogue media as well as assessing recordings, I want to match the inputs and recording settings to the task. Around 17% of consumers say transfers are their main requirement.

Common buying pitfalls

  • Assuming two volume controls mean two independent mixes

    On the Focusrite Scarlett 2i2 4th Gen, the headphone and line outputs share the same signal, even though their levels can be adjusted separately. This means you can’t automatically create two different listening mixes.

    Check the manual for the exact model to see which signals can be sent to its headphone outputs.

    If you need separate mixes, you may need a different interface or additional signal routing.

  • Assuming two headphone sockets can receive separately controlled signals

    RME describes the Babyface Pro FS sockets as parallel, with separate amplifier stages. This alone doesn’t confirm that you can create two different mixes.

    Look for explicit model-specific information about independent routing, not just the number of sockets.

  • Using a DAW Thru route without checking the output level

    Audient warns that DAW Thru on the iD14 MKII bypasses the volume control on that output, which can make the signal very loud.

    If needed, use an adjustable cue mix and check the level before anyone puts on their headphones.

  • Treating recording specifications as playback requirements

    IASA’s advice on 24 bit and 48 kHz applies to new digital transfers from analogue sources, not simply to playing back existing restored files.

    First decide whether you’ll also be digitising analogue media. Assess recording settings and the inputs you need only for that additional task.

Relevant brands to consider

Focusrite

The Scarlett 2i2 4th Gen is a compact option for one headphone listener using active monitors, with the option of two analogue inputs.

  • Focusrite lists separate level controls for monitors and headphones.
  • According to Focusrite, the line and headphone outputs share the same audio signal, so they can’t provide separate comparison mixes.

MOTU

The M2 is designed for direct control by one listener, with visible level meters and analogue inputs and outputs.

  • MOTU’s technical specifications list separate volume controls for the monitors and headphones.
  • The M2 has one headphone output; its specifications don’t support a second, independent listening position.

Solid State Logic

The SSL 2+ MKII is worth considering when two people are listening at once or headphone B needs to receive a different playback signal.

  • The Solid State Logic manual describes two headphone outputs with separate level controls, and an option to route DAW outputs 3–4 to headphone B.
  • To use different signals, you’ll need to configure your playback software accordingly.

Audient

The iD14 MKII is worth considering if you’ll use its additional line outputs and configurable headphone route.

  • Audient lists four line outputs and two headphone sockets; you can set up the cue route in the iD mixer.
  • Audient warns that DAW Thru bypasses the volume control on that output.

RME

The Babyface Pro FS is an alternative for a workstation where a wide range of interface features is desirable.

  • RME describes two headphone sockets with separate amplifier stages.
  • This description doesn’t confirm that the sockets offer two independently routable headphone mixes.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need an interface with 24-bit recording to play back existing archival files?

No, not if you’re only listening to existing files. IASA’s recommendation of at least 24 bit and a minimum of 48 kHz is about making new digital copies of analogue material. For existing files, first choose suitable playback outputs and listening routes; consider recording requirements separately if you’ll also be transferring material.

How do you connect two people for a comparison?

Check whether the interface has two headphone outputs and whether both need to receive the same DAW signal or separate signals. According to the Solid State Logic manual, headphone B on the SSL 2+ MKII can receive DAW outputs 3–4; configure your playback software accordingly and start at a low level. For the iD14 MKII, use a configured cue route if you need volume control: Audient warns that DAW Thru bypasses it.

What should you consider when setting up and maintaining a shared workstation?

Before installation, check the latest driver and operating system support for the exact model. Solid State Logic lists a Windows driver and class-compliant operation on Mac for the SSL 2+ MKII. For shared use, also note which outputs and levels should be active when a different user takes over.

Is there a standard two-year legal guarantee in the Netherlands?

No. According to the Dutch government, consumer purchases are covered by a guarantee that the product will be fit for purpose, but the Netherlands has no fixed statutory guarantee period. If a product is faulty, the retailer is your point of contact. If you’re buying on behalf of an archive institution, check the applicable contractual terms separately; this explanation of consumer purchases doesn’t establish rights for business purchases.

Which product safety rules apply to an electrical audio interface in the Netherlands?

The Dutch Ondernemersplein states that businesses placing electrical or electronic equipment on the market, or trading in it, must comply with the relevant European rules. These include electrical safety, electromagnetic compatibility and the manufacturer’s responsibility for CE marking and an EU declaration of conformity. The rules that apply depend on the specific product; CE marking alone says nothing about audio quality.