First, decide how you’ll restore a usable version of a model, then work out how much space you’ll need for files, versions and expected growth. Two drive bays may be enough if the usable capacity meets your needs; four give you more room to plan your storage, but they don’t replace a separate backup. If you use Revit worksharing with an active central model, assess the NAS’s suitability for that workflow separately: Autodesk recommends a Windows file server for this use.
Who is this buying guide for?
Designer with a growing project archive
You store models and project versions that are increasing in size, and want to plan ahead for drive bays and usable capacity. Synology describes RAID configurations and the DS925+ as a solution for growing storage needs.
Designer who needs to recover previous versions
You want to be able to restore a usable earlier version of a project after a mistake or incident, even if the NAS itself fails. The Netherlands National Cyber Security Centre recommends testing backups.
Studio working on a shared model
You want to distinguish between backing up project files and using the file server on which colleagues actively work on a Revit central model. Autodesk outlines separate considerations for this.
What should you look for?
First decide what you need to be able to restore, then calculate the usable capacity you’ll need and assess any active collaboration workflow separately.
| What to consider |
What should you check? |
Who is this important for? |
| Usable capacity and growth |
Add up your files and the versions you want to keep, estimate future growth and calculate the usable space available with your chosen drives and storage configuration. Check that the drives are compatible with the exact NAS model and software version. |
If my models, files and saved versions keep growing, I want to know how much space will actually be available. Around 36% of consumers say growth is their top priority. |
| Restoring a model version |
Check how backups and saved versions work, where a separate copy is stored and how to restore files. Test the recovery process. |
If I need to carry on with a usable earlier version after a mistake, I want to check in advance that I can restore it. Around 29% of consumers prioritise recovery. |
| File transfer and active collaboration |
Decide whether you only need to make backups or also work directly on a shared model. Assess the latter workflow separately and check your entire network connection. |
If colleagues share project files or work on a central model, I want to know whether the setup suits that workflow. Around 21% of consumers give file transfer or collaboration top priority. |
| Complete storage setup |
Check what’s included, which drives are compatible and whether you need a separate backup destination. |
If I want to plan the whole setup, I want to know in advance what else I’ll need. Around 14% of consumers want to assess the complete setup first. |
Buying pitfalls
-
Assuming two mirrored drives count as two separate backups
Mirroring can provide redundancy if a drive fails, but it isn’t a copy stored elsewhere.
Plan for a separate backup destination and check that you can restore earlier files from it.
-
Adding up raw drive capacities as if they were available project space
Usable space depends in part on the drive sizes and the storage configuration you choose.
Calculate the capacity for that configuration, allowing for the versions you want to keep and expected growth.
-
Assuming a backup NAS can automatically serve as an active Revit file server
A suitable destination for backups isn’t automatically suitable for an active central model. For file-based Revit worksharing, Autodesk recommends a Windows file server; how well a NAS works depends on whether it correctly emulates Windows network behaviour.
Assess the active Revit workflow separately, and don’t choose a backup destination on the assumption that it can also host collaboration.
-
Comparing a diskless enclosure as if the complete setup were included
For products such as the QNAP TS-264 and UGREEN DXP4800 Plus, the manufacturers say that data drives are sold separately.
Check what’s included in the exact listing, and factor in the drives and a separate backup destination.
Brands to compare
Synology
The DS225+ has two drive bays, while the DS925+ has four. Synology lists two built-in 2.5 GbE ports for the DS925+.
- The DS925+’s four bays may suit an archive for which you want to plan for more internal drives.
- Check the drive compatibility policy for the exact model and DSM version. Synology describes greater flexibility with certain third-party drives on 2025 Plus models running DSM 7.3; this doesn’t mean compatibility is unrestricted.
QNAP
QNAP says the TS-264-8G has two drive bays and two 2.5 GbE ports; the model is supplied without data drives.
- The ports are worth comparing if the rest of your network is set up to use them.
- Two connections alone don’t prove faster transfers to a single computer, and the drives need to be purchased separately.
UGREEN
UGREEN describes the NASync DXP4800 Plus as a NAS supplied without data drives, with four drive bays and 10 GbE and 2.5 GbE connections.
- The four bays and listed network connections are worth considering if you’re factoring in both growth and your network setup.
- Port specifications aren’t measured performance in a design studio; check the exact configuration and drives separately.
ASUSTOR
ASUSTOR lists two drive bays and 2.5 GbE for the Drivestor 2 Pro Gen2 (AS3302T v2).
- A two-bay model is worth comparing if two bays suit your capacity plans.
- ASUSTOR’s claims about value for money or speed don’t prove an advantage for storing architecture models.
TerraMaster
TerraMaster lists four drive bays, 4 GB RAM and one 2.5 GbE port for the F4-425.
- The four bays give you another option for planning internal drives for a growing collection.
- The product information focuses mainly on home and multimedia use, and doesn’t substantiate specific performance for Revit worksharing.
Joybuy products
This selection features Synology NAS models for backups and storage planning for a growing project archive. Check which drives and expansions suit your setup for each model.
Image unavailable
Synology DiskStation DS1525+ NAS
Suits a growing project archive for which you want to plan for several internal drives.
Five drive bays; expandable to 15 drives; two 2.5 GbE ports. Hard drives not included.
View at Joybuy
Image unavailable
Synology DiskStation DS1825+
Suits a project archive for which you want to plan capacity around several internal drives.
Eight drive bays; expandable; two 2.5 GbE ports.
View at Joybuy
Image unavailable
Synology DiskStation DS925+, without hard drives
Suits a growing collection if four drive bays and room to expand fit your plans.
Four drive bays; expandable to nine with a DX525 expansion unit; two 2.5 GbE ports. Hard drives not included.
View at Joybuy
Frequently asked questions
Is RAID 1 the same as backing up your architecture model?
No. RAID 1 writes identical data to multiple drives and provides redundancy against certain types of drive failure, but it isn’t a separate backup. The Netherlands National Cyber Security Centre recommends keeping at least three copies of important business data: the original files and two backups.
How can you check whether your backup is usable?
Check that the backup task has completed successfully and test whether you can restore files. The Netherlands National Cyber Security Centre recommends testing a backup technically before you need to rely on it.
Can you simply put an active Revit central model on the same NAS?
Not without assessing the workflow separately. For file-based Revit worksharing, Autodesk recommends a Windows file server; how well a NAS works depends on whether it correctly emulates Windows network behaviour. This is separate from whether a NAS is suitable as a backup destination.
What should you check before buying?
Check whether hard drives are included, which drives are compatible and what separate backup destination you’ll need. QNAP says the TS-264 is supplied without hard drives; check the listing for the model you’re considering to see exactly what’s included.
Are there privacy obligations when storing project files on a NAS?
If an organisation processes personal data, the GDPR requires appropriate security based on the risks, according to the Netherlands Data Protection Authority. If the organisation engages a processor to handle that data, the Authority says the parties involved must set out the relevant matters in writing. Whether this applies to your files and any external backup service depends on how the data is actually processed.