Who are these setups suitable for?

Student with a small desk

Needs space for two well-positioned speakers alongside their animation workspace, and wants an easy way to connect them to a computer. Genelec explains how stereo positioning determines the listening setup; ADAM Audio and PreSonus list compact options with different connections.

Student with an audio interface and a permanent mixing position

Wants to assess music and source recordings in stereo using two separately positioned nearfield monitors and suitable analogue connections. Yamaha and JBL Professional list balanced inputs on the models reviewed.

Creator weighing up bass response and the cost of a complete set

Wants to assess low frequencies in the score without overlooking the effect of the room or the cost of buying a second speaker. Product specifications from Yamaha, ADAM Audio and PreSonus show why it’s important to check what’s included and the conditions used for measurements.

What should you look for in studio monitors?

Compact active stereo set

A good fit if: you have limited desk space or are looking for a pair with a direct computer connection. ADAM Audio lists USB-C and TRS connections for the D3V; the PreSonus Eris 3.5 2nd Gen is an analogue stereo pair.

Keep in mind: the stated lower frequency limit for the Eris 3.5 is 80 Hz. That figure alone doesn’t tell you how the bass will sound in your room.

Separate nearfield monitors

A good fit if: you have two suitable positions and your audio interface’s outputs match the monitors’ analogue inputs. Yamaha, ADAM Audio and JBL Professional list analogue connections on the models mentioned.

Keep in mind: check whether the model is sold individually or as a pair. Placement controls can’t make up for an unsuitable setup.

Start by considering where to place the two speakers. For stereo monitoring, Genelec recommends a 60-degree angle, with the listener at the point of an equilateral triangle. Then check the connections and what’s included to make sure they suit your workspace.

What to consider What should you check? Who is this important for?
Mix balance in the room Can you position both monitors symmetrically towards your listening position? Compare any placement controls, but don’t expect them to solve every room-related issue. I want to assess music and source recordings reliably from my own listening position; around 33% of consumers prioritise getting the best possible mix balance in the room.
Desk space Measure the space available for both speakers. Also check that the setup will fit alongside your screen and other workspace essentials. I have a small student workspace and want to fit two speakers without losing space for my animation work; around 25% of consumers give desk space top priority.
Connecting to a computer or interface Compare your computer or audio interface’s output with the inputs on the set, and check which cables you’ll need. Use USB-C only if the monitor supports an audio connection via USB-C. I want to connect my computer or interface to the monitors without using an incompatible connection; around 25% of consumers start by checking for a suitable connection.
Bass and a complete stereo set Check whether the box contains one monitor or a pair. Compare frequency specifications only when they use the same dB condition, and take the room into account. I want to assess the low frequencies in my score and know what I need for stereo; around 17% of consumers prioritise bass response and a complete set.

Common buying mistakes

  • Mistaking a single monitor for a stereo set

    The European product specification states that the Yamaha HS5 is packaged individually, while PreSonus sells the Eris 3.5 2nd Gen reviewed here as a pair. What’s included determines whether you’ll need a second speaker.

    Check the number of monitors and which cables are included for the exact model you’re buying.

    You may need a second monitor for stereo; also check that you have suitable connection cables.

  • Comparing bass limits without checking the measurement conditions

    Yamaha lists different frequency limits for the HS5 at −10 dB and −3 dB; ADAM Audio gives the T5V’s limit at −6 dB. Your room also affects what you hear in the low frequencies.

    Check the dB condition given alongside the frequency specification, and consider whether you can position the monitors suitably in your room.

  • Not checking your computer’s output

    The ADAM Audio D3V has USB-C and TRS connections; the PreSonus Eris 3.5 2nd Gen reviewed here uses analogue inputs. These connection options won’t necessarily work with the same equipment.

    Compare the actual output on your computer or audio interface with the inputs on the model you’ve chosen, and check which cables you’ll need.

    You may need a suitable cable or an audio interface.

Relevant brands to consider

Yamaha

The HS5 is an active nearfield monitor sold individually.

  • Yamaha lists balanced XLR and TRS connections, as well as Room Control and High Trim.
  • You’ll need two units for stereo. The European product specification gives frequency limits at both −10 dB and −3 dB; make sure you distinguish between the measurement conditions.

ADAM Audio

ADAM Audio describes the T5V as designed for small control rooms, while the D3V is a compact pair for your desk.

  • ADAM Audio lists USB-C, balanced TRS inputs and included placement stands for the D3V.
  • The T5V has a rear bass reflex port, so allow for the available space when positioning it. The T5V and D3V frequency specifications use different measurement conditions.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact analogue stereo pair for uses including small studios and video production.

  • PreSonus lists TRS, RCA and mini-jack inputs, plus included cables.
  • The stated lower frequency limit is 80 Hz; don’t use this figure as your only measure of bass response.

KRK

The ROKIT 5 Generation Five is an active monitor sold individually.

  • KRK lists Mix, Focus and Create listening modes, along with 25 tuning combinations.
  • You’ll need two monitors for stereo. The manufacturer’s features don’t prove that the tuning will solve problems in every room.

JBL Professional

The 305P MkII is an active monitor sold individually, with balanced inputs.

  • JBL lists XLR and TRS inputs, as well as Boundary EQ and HF Trim to adapt the sound to the placement.
  • You’ll need two monitors for stereo. Placement adjustments don’t replace checking the actual stereo positioning.

Related products

Related products will be available soon.

Frequently asked questions

How should I position two monitors for a stereo mix?

Point both monitors towards your listening position as symmetrically as possible. For stereo monitoring, Genelec recommends a 60-degree angle between the speakers, with the listener at the point of the triangle. Adapt the setup to what’s practical in your room.

Can room correction solve problems in a difficult workspace?

Not always. Genelec says calibration can help, but may not resolve acoustic issues completely; placement and reflections still need attention.

What cooling-off period and rights apply to an online purchase in the Netherlands?

For many distance purchases, you have a 14-day cooling-off period, according to the Dutch government. This is separate from your rights if a consumer product is faulty: the Dutch government says the seller is your point of contact and notes that there is no fixed statutory guarantee period. Check the terms and conditions that apply to your purchase.

Can I use local recordings or other people’s music in my student animation?

Not automatically: according to the Dutch government, you generally need permission to use copyright-protected music and films. You may not distribute or publish a private copy; exceptions may apply under certain conditions for education, quotation or private use. Before publishing, find out who owns the rights and whether you have permission or an exception applies to your specific use.

Does a CE marking tell me whether a monitor is suitable for mixing?

No. Dutch government information about CE marking concerns the applicable product safety requirements; the marking doesn’t tell you whether the connections match your equipment or whether the monitor setup suits your room. Check the model, connections and placement options for that.