Who is this relevant to?

Listeners with passive speakers

If you want to keep using your existing passive speakers, start by checking their load and the connections you need. Yamaha and WiiM provide model specifications covering details such as power and connectivity. Check the specifications for the exact amplifier model and your own speakers.

Listeners who value bass where they listen

If you want to enjoy electronic music with useful bass, it’s worth paying attention to speaker and subwoofer placement, as well as tuning the sound to your room. Genelec notes that hard surfaces reflect sound and that placing a subwoofer in a corner can increase its output, but this won’t necessarily give you the flattest frequency response.

Listeners who stream from a playlist

If you mainly listen through a music service, check that the exact amplifier model supports your preferred playback method. Streaming features and protocols vary between models. For example, WiiM states that the Amp Pro does not support AirPlay 2.

What should you consider when choosing?

First, check that the amplifier is suitable for your passive speakers and playback sources. Then look at the options for adjusting the bass in your loft.

What to consider What should you check? Who is this important for?
Matching your speakers Check whether your speakers are passive and compare power and impedance on the same measurement basis. Also check which speaker connections the exact model has. If I want to keep my existing passive speakers, I look for a suitable match and the listening level I want. Around 31% of consumers put speaker compatibility first.
Bass where you listen Assess the bass from your usual listening position. Check whether a subwoofer output and the available bass controls suit your setup. If you want to hear electronic music with useful bass, you’ll need to consider speaker placement and the acoustics of your room. Around 31% of consumers say bass performance where they listen is their main concern.
Playback method and connections Check which inputs you need and whether the specific streaming protocol is supported, for example for a music service, TV, separate streamer or record player. If I want to stream from my own music service and connect other devices too, I check these features for each model. Around 25% of consumers give playback convenience and connectivity top priority.
Complete setup and after-sales support Check whether you’ll also need a streamer, expansion card or subwoofer. Review the seller’s terms and what happens if something develops a fault. If you want to understand the full cost and support for your setup, factor in any extra equipment you need before choosing an amplifier. Around 13% of consumers put their complete setup and after-sales support first.

Common buying mistakes

  • Comparing wattage without checking impedance and measurement conditions

    Wattage figures are only comparable when the load and measurement conditions match. Yamaha specifies a minimum RMS output of 85 W + 85 W at 8 ohms for the A-S501; Denon lists 50 W per channel at 8 ohms and 85 W per channel at 4 ohms for the PMA-900HNE. Don’t compare these figures without taking their conditions into account.

    Check the impedance of your own speakers and compare amplifier ratings at the same load and under the same measurement conditions.

  • Assuming a subwoofer or more powerful amplifier will solve uneven bass

    Your speakers and listening position, their placement and your room’s acoustics all affect how the bass sounds. A subwoofer output gives you the option to add a subwoofer, but it won’t guarantee even bass on its own.

    First assess speaker placement and the bass from your usual listening position. Then consider which addition or adjustment would suit your setup.

  • Assuming streaming features based on the brand alone

    Features can vary between models. For example, WiiM states that the Amp Pro does not support AirPlay 2. BluOS and Dirac Live for the NAD C 389 depend on the optional MDC2 BluOS-D card.

    Check the full model and what’s included against the playback method you use.

Brands to consider

Yamaha

The A-S501 is an integrated stereo amplifier for anyone looking to pair separate sources with passive speakers.

  • Yamaha specifies a minimum RMS output of 85 W + 85 W at 8 ohms for this model, along with optical and coaxial inputs, adjustable loudness and a subwoofer output.
  • You may need a separate source for network streaming. The stated power rating applies under the specified load and measurement conditions.

WiiM

The Amp Pro combines amplification for passive speakers with streaming, room adjustment and a subwoofer output.

  • WiiM specifies an output of 60 W per channel at 8 ohms for the Amp Pro.
  • According to WiiM’s device list, the Amp Pro does not support AirPlay 2. Check that the exact model supports your preferred playback method.

Denon

The PMA-900HNE combines HEOS network features with analogue, digital and phono sources.

  • Denon lists 50 W per channel at 8 ohms and 85 W per channel at 4 ohms, alongside digital inputs and MM/MC phono support.
  • These power ratings are for different loads, so they cannot be compared directly.

NAD

The C 389 can be expanded with streaming and room-correction features.

  • NAD lists two subwoofer outputs and MDC2 expansion slots.
  • The optional MDC2 BluOS-D card is required for BluOS and Dirac Live. Don’t assume these features are included as standard with the base model.

Marantz

According to Marantz, the MODEL 60n combines network features with connections including HDMI ARC and phono.

  • Marantz specifies 60 W per channel and lists HEOS and MM phono.
  • Check that this model’s connections and features suit your sources and setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Should you choose a higher wattage for powerful electronic bass?

No. A higher stated wattage won’t automatically guarantee better bass where you listen. Compare power ratings at the same impedance and under the same measurement conditions, and take your speakers, their placement and your room’s acoustics into account too. A subwoofer output gives you a connection option, but it won’t automatically make the bass even.

How should you position a subwoofer in a loft?

Assess its position from where you normally listen, as a corner won’t automatically give you the flattest bass response. Genelec explains that placing a subwoofer by a wall or in a corner can increase its output. A flatter result depends on the room and the resonances at the chosen position. The setup also depends on your speakers and subwoofer.

What extra costs and rights should you consider when buying online?

Check whether your chosen setup also requires a streamer, subwoofer or expansion card. According to the Government of the Netherlands, consumers generally have a 14-day cooling-off period for online purchases, although exceptions may apply. If a product develops a fault, you may also have the right to a repair or replacement.

What safety information should you check for an amplifier?

Check the intended mains supply and safety information for the exact device. Electrical equipment within the scope of the EU Low Voltage rules must comply with them. The European Commission emphasises that CE marking does not, in itself, mean that the EU or another authority has approved the product.

Can you play music at any volume you like in your loft?

Don’t assume there’s one universally permitted volume for every home. The Government of the Netherlands advises people dealing with noise complaints from neighbours to agree on arrangements first, such as the times when music can be played. Also check any agreements or rules that apply to your building.