Listener with existing passive speakers
You want to keep your speakers and first check whether a new amplifier is compatible with them according to the manufacturer’s requirements.
Choose a traditional integrated stereo amplifier if you mainly use a suitable wired source. Choose a streaming amplifier if you want to play choir recordings directly through supported network services. Either way, first check that the amplifier is compatible with your passive speakers and source: the stated wattage alone doesn’t prove that it will reproduce choir music better. Yamaha, Denon and WiiM publish specifications and connection requirements for their models. In an open-plan flat, also consider where you’ll listen and agree with your neighbours on music, as advised by the Dutch Government.
You want to keep your speakers and first check whether a new amplifier is compatible with them according to the manufacturer’s requirements.
You play choir recordings through a separate player or TV and are looking for an input that matches the output of your source.
You want to play choir recordings without a separate streamer, while considering where you’ll listen and how your setup may affect others in the flat.
A good fit if: you already have a suitable CD player or another wired source and want to keep using passive speakers.
Bear in mind: check the source outputs, speaker requirements and the space available for the amplifier.
A good fit if: you want to play choir recordings directly through supported network services with passive speakers.
Bear in mind: check that your service and playback method are supported. For TV audio via HDMI ARC, WiiM specifies stereo PCM for the WiiM Amp.
| What to consider | What to look for when buying | Who is this most important to? |
|---|---|---|
| Passive speakers | Check your speakers’ impedance and connections against the requirements for the exact amplifier model. Cambridge Audio specifies 8-ohm speakers for the AXA35. | I want to keep using my current passive speakers and check they’re compatible first; around 36% of consumers prioritise matching their speakers. |
| Source connection | Compare the output of your CD player or TV with the amplifier’s inputs. Yamaha lists optical and coaxial inputs for the A-S501. For streaming, also check that your preferred service and playback method are supported. | I want to connect my CD player, TV or streaming service without extra steps; around 29% of consumers give source connectivity top priority. |
| Setup and listening position | Decide where the speakers and listening position will be, and measure the available space. Yamaha lists the A-S501’s dimensions as 435 × 151 × 387 mm. | I want to position the amplifier and speakers properly in my open-plan living space; around 21% of consumers prioritise setup and listening position. |
| Listening volume and neighbours | Choose a volume that suits your situation and agree on music with your neighbours if needed. The Dutch Government advises talking things through and agreeing on a solution when noise causes problems for neighbours. | I want to listen to choir music through speakers without forgetting about my neighbours; around 14% of consumers give consideration for neighbours top priority. |
A wattage figure depends on the load and measurement conditions. Denon lists figures for the PMA-600NE at both 8 and 4 ohms; they aren’t directly comparable.
Only compare figures measured with the same load and on the same basis, then check the requirements for your own speakers.
WiiM says the WiiM Amp supports network playback. According to Cambridge Audio, the USB port on the back of the AXA35 is for charging, not for connecting a Bluetooth adapter.
First decide how you want to play your music, then check the features of the exact model. If it doesn’t have built-in streaming, you may need a separate compatible source.
A power rating doesn’t determine what volume is right for your listening position or your neighbours.
Think about where you’ll put your equipment before you buy, and follow any agreements about playing music in your building. The Dutch Government advises neighbours to try to reach an agreement together if noise causes problems.
The PMA-600NE is an integrated amplifier for wired digital sources, Bluetooth and, optionally, an MM turntable.
The A-S501 is an integrated amplifier with optical and coaxial inputs for wired sources.
The WiiM Amp combines amplification for passive speakers with network playback.
The AXA35 is an analogue amplifier with a built-in phono stage, designed for use with a suitable separate source.
The PM6007 is an integrated two-channel amplifier with a built-in DAC for wired sources.
No, not if you already have a separate CD player with an output that matches an input on the amplifier. Check the connections on both devices.
According to WiiM, you can connect it via HDMI ARC if your TV has a compatible ARC connection. Set your TV’s digital audio output to stereo PCM for the WiiM Amp.
Check that they’re passive speakers, then compare their impedance and connection type with the amplifier’s requirements. Cambridge Audio specifically specifies 8-ohm speakers for the AXA35.
The Dutch Government advises neighbours to try to agree on a solution together if noise causes problems, for example by agreeing when to play music. The applicable house rules and circumstances depend on the situation, so adjust the volume to suit your home and surroundings.
According to the Netherlands Authority for Consumers and Markets, a standard online consumer purchase usually comes with a statutory cooling-off period of up to 14 days after delivery. There are legal exceptions. The cooling-off period is separate from your rights if a product is faulty or the wrong item is delivered.