Performer using an open microphone
You want to hear your vocals or acoustic instrument without distracting feedback. Microphone and speaker placement both play a part, as Shure explains.
Choose a stage monitor based on who needs to hear it: performers may need their own monitor mix, while the sound engineer needs to assess the sound in the venue separately. If performers can already hear one another clearly during the soundcheck, extra amplification for monitoring may not be necessary; a monitor also cannot replace checking the front-of-house mix. If you do need an extra monitor, focus on microphone placement, the number of monitor mixes available, and the space needed for the speaker and cables.
You want to hear your vocals or acoustic instrument without distracting feedback. Microphone and speaker placement both play a part, as Shure explains.
You want to distinguish the front-of-house mix from the monitor mix and check how many suitable outputs the mixing desk has. Shure explains how the available aux outputs determine the number of separate monitor mixes you can create.
You need to choose a setup that fits the space available and check which local council rules apply to your event. Ondernemersplein explains that some events require a permit, while a notification is sufficient for others.
First decide who needs to hear the monitor. Then check whether the mixing desk can provide the mixes you want and whether the chosen speaker can be positioned properly on stage.
| What to consider | What should you check? | Who should pay particular attention? |
|---|---|---|
| Being able to hear clearly without feedback | Consider the positioning angle and adjustment options. Test the setup with the microphones you use during the soundcheck. | If I want to hear myself clearly without an open microphone picking up the speaker, I focus on the setup; around 36% of consumers put feedback control first. |
| Setting up on a small stage | Compare possible positions for a personal monitor, floor monitor or multi-purpose speaker, including the power and signal cables you’ll need. | When space on stage is limited, I want to know where the monitor can go without getting in the way; around 29% of consumers prioritise a compact setup. |
| A mix for each performer | Work out how many different mixes you need and check the mixing desk’s available aux outputs and suitable connections. | If several performers need to hear different things, I want to know whether the mixing desk can provide enough separate mixes; around 21% of consumers put this need first. |
| Complete setup | Make a list of the equipment you already have and what else you need, such as a power amplifier, cables or personal receivers. | When I need to divide the available budget across the whole setup, I compare all the equipment required, not just the speaker; around 14% of consumers prioritise the full set of equipment. |
Feedback happens when a microphone picks up sound from a speaker again. A louder monitor won’t automatically solve poor placement.
First test the position of the microphone and monitor, then decide how much amplified foldback you need.
A passive speaker won’t produce sound from the mixing desk’s signal without a separate power amplifier.
Compare the equipment you already have with what each setup still requires.
The number of aux outputs available limits how many separate monitor mixes the mixing desk can provide.
Agree on who can share the same mix and check the outputs before choosing your equipment.
You may need a different mixing desk or a different way of sharing the existing mixes to provide extra independent mixes.
Mackie describes the SRM150 as a compact active personal monitor with a built-in three-channel mixer.
According to Highlite, the M10 and M12 are active floor monitors with 10-inch and 12-inch woofers respectively.
According to Electro-Voice, the PXM-12MP is an active coaxial stage monitor.
Yamaha says speakers in the DBR series can be used as floor monitors at a wedge angle.
LD Systems describes the MON 8 A G3 as an active coaxial 8-inch stage monitor.
A stage monitor is designed to let performers hear their monitor mix, not to replace the front-of-house mix. First decide whether you need foldback on stage or a way to check the sound for the audience.
Check which aux output provides the monitor mix and whether it’s compatible with the monitor’s input. Position the monitor in relation to the microphone so it picks up as little sound from the speaker as possible, then test the setup during the soundcheck.
No. According to Ondernemersplein, some events require a council permit, while a notification is sufficient for others. Ask the council what applies to your specific venue and event setup. If people are exposed to noise as employees, workplace rules also apply to their exposure; these aren’t general noise limits for the audience.
Electrical equipment covered by the relevant EU product rules must carry CE marking; the exact rules depend on the product. For the specific model, check the product information, instructions for use and suitability of the power connection. CE marking isn’t an independent test of sound quality.
First report the fault to the retailer and keep your proof of purchase and manual. According to the Dutch government, statutory guarantee rights for consumer purchases entitle you to a product that works properly; any additional guarantee doesn’t replace those rights.