Who is this choice relevant to?

Guitarist using one microphone

You want to record your acoustic guitar with one external microphone. In that case, a suitable mic input and good mic placement matter more than extra channels you won’t use. Shure explains how to try different microphone positions to find the sound you’re after.

Guitarist using two microphones

You want to record two microphone positions at once, so you’ll need two mic preamps. Some placements can cause phase differences; RØDE discusses this consideration in its guide to stereo microphone techniques.

Guitarist using a microphone and pickup

You want to record the microphone signal and the signal from your built-in pickup separately. Check that the interface can use both inputs at the same time; Focusrite and MOTU describe models with mic and instrument inputs.

What should you look for when buying?

First decide how many sound sources you want to record at once. Monitoring and the booth’s acoustics are separate considerations.

One microphone

Choose this if: you want to record one guitar part with one external microphone and keep the equipment around your playing area to a minimum.

Bear in mind: a second input may be an instrument input, not a second mic preamp. Microphone placement and reflections will still affect the recording.

Two microphones

Choose this if: you want to record two microphone positions at once and mix the signals separately later. Focusrite, MOTU and PreSonus describe interfaces with two mic inputs.

Bear in mind: you’ll need a second microphone and cable; some placements can cause phase differences.

Microphone plus pickup

Choose this if: your guitar has a suitable pickup output and you want to record both signals at once on separate tracks.

Bear in mind: the instrument input is only useful if your guitar has a pickup; the pickup signal doesn’t automatically replace the sound captured by a microphone.

What to consider What should you check? Who is this important for?
Connecting one microphone Check the mic input, whether your microphone needs phantom power, and whether the controls and cables are easy to reach in the booth. If you want to use one microphone and take up little space, a simple connection is the priority; around 33% of consumers prioritise this set-up.
Recording two microphones at once Count the mic preamps that can be used at the same time. Check the phantom power requirements and listen to the combination in mono too. If you want to record two microphone positions separately, two preamps are important; around 27% of consumers prioritise recording with two microphones at once.
Pickup alongside the microphone Check whether your guitar has a pickup output, whether there’s an instrument or Hi-Z input, and whether both signals can be recorded separately. If you want to record both the pickup and the microphone, being able to use both inputs at the same time is key; around 20% of consumers prioritise this combination.
Monitoring and computer Check the monitoring controls, headphone socket, USB connection, power requirements and system requirements for your computer. If you want to hear yourself while playing and connect the interface to your computer, these connection and monitoring requirements matter; around 20% of consumers prioritise these points.

Common purchasing mistakes

  • Assuming two inputs mean two mic inputs

    According to Focusrite, the Focusrite Scarlett Solo 4th Gen has one mic preamp and a separate instrument input. So the number of connections alone doesn’t tell you how many microphones you can record at once.

    For a two-microphone recording, count the mic preamps that can be used at the same time.

  • Buying extra channels to improve the sound of your booth

    Microphone placement and the sound of the room affect your recording; an extra interface channel won’t remove reflections.

    First, try one microphone in different positions. Choose extra channels if you genuinely want to record more sources at once.

  • Assuming a stereo pair will automatically sound better

    With spaced microphones, differences in arrival time can cause phase problems.

    Compare the recording in mono as well, and see how it sounds against the result from one carefully placed microphone.

    This approach involves bringing a second microphone and cable, and spending extra time on placement and checking the phase.

  • Assuming trial software comes with an unlimited licence

    PreSonus states that the Studio 24c includes a six-month trial of Fender Studio Pro. Check what software access is available after that period.

    Before buying, check which software is included permanently and which is only available for a limited time.

Relevant brands to consider

Focusrite

The Scarlett Solo 4th Gen is designed for one microphone and a separate instrument input; the Scarlett 2i2 4th Gen offers two mic preamps.

  • Focusrite lists one mic preamp and a Hi-Z input for the Solo, and two mic preamps for the 2i2.
  • According to these specifications, features such as Auto Gain and Clip Safe won’t improve the acoustics of a small booth.

MOTU

The M2 is worth considering if you want two switchable mic and instrument inputs, plus visible level meters.

  • MOTU lists gain, phantom power and a direct monitoring switch for each input.
  • Sound quality and preamp performance figures here come from the manufacturer; they aren’t an independent comparison with other models.

PreSonus

The Studio 24c is an option if you want to connect two mic, instrument or line sources and mix the input signal with playback from your computer.

  • PreSonus lists two simultaneous inputs and includes USB-C-to-USB-C and USB-C-to-USB-A cables.
  • The stated access to Fender Studio Pro is a six-month trial; check the current software terms.

Steinberg

The UR22C is a two-channel option if you’re also looking for MIDI connections or monitoring with built-in DSP effects.

  • The Steinberg manual lists two mic preamps and DSP monitoring.
  • Support for 32-bit integer and 192 kHz is a format specification, not proof that it will make a recording sound better in a small booth.

Blackstar

The POLAR 4 is a four-channel option if you want to connect more sources at once or use two pairs of headphones.

  • Blackstar lists mic, instrument and line inputs, as well as phantom power.
  • Claims about the sound of the FET input and the Enhance function come from the manufacturer; four channels may be more than you need for one microphone.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need two inputs for one condenser microphone?

No. One suitable mic input is enough for one microphone. Check whether your microphone needs phantom power; you only need a second mic preamp if you want to record two external microphones at once.

How should I start positioning a microphone in a small booth?

Start with one microphone near the point where the neck meets the body, and listen from different distances and positions. Move the microphone if you’re not happy with the sound or the room tone; a different interface won’t remove recorded reflections.

Will direct monitoring let me hear effects from my recording software too?

Not automatically. According to MOTU, hardware direct monitoring sends the live input signal to your headphones or speakers without first routing it through your computer software. Check the monitoring path on your chosen model if you want to hear software effects while playing.

What are my rights in the Netherlands if my audio interface is faulty?

According to the Dutch government, you’re entitled to a product that works properly and can ask the retailer to resolve a fault. The Netherlands has no fixed statutory warranty period; a manufacturer’s warranty doesn’t replace your statutory rights. For distance purchases, the cooling-off period is usually 14 days.